My iPhone4 is just showing the apple logo, after a while it shows the connect to iTunes symbol, I connected to iTunes on my PC to restore
My iPhone 4 is just showing the apple logo, then it changes to the connect to iTunes symbol, when I connected to the PC and tried to restore and update it shows an error, it seems it cannot recognise the phone, is there anything else I can do to get my phone working again?
Hi serpico656,
When you got the error restoring your iPhone, did it include an error number or description?
For an overview restore troubleshooting article with links to details, see
Resolve iOS update and restore errors in iTunes - Apple Support
If you know the update error number check out,
Resolve iOS update and restore errors - Apple Support
Take care,
Nubz
Similar Messages
-
I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have been successful. It connects and is recognised by my itunes and computer, but still after restoring it, it just won't get passed the logo..what can i do? what is the problem?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IS MY IPOD DEAD?!?!?!?!?
I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
to charge it as well as connecting it to itunes but no success. Could you please help?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
iPad went black and has the apple logo with a little wheel at the bottom. Tried turning on and off doesn't work.
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
Apple logo takes a while to show up during boot up
I noticed that when I restarted my MacBook today, the Apple logo takes a while (20-30 seconds) to just show up before the spinning gear shows up.
I'm not sure what caused this. Any ideas? Thanks.
Things I've tried
1. Repair disk permissions
2. Verify disk
3. Reset PRAM
4. Boot into Safe Mode
5. Make sure Mac OS X 10.6.5 is the startup diskIt sounds normal for me. My iMac always does that. But my sample size is a bit low; I think I have only rebooted it five or six times since I first received it in August.
Are you using Boot Camp? If not, rebooting is rarely necessary. Try using sleep mode instead of shutting down. Waking up from sleep mode is really fast. -
My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work???? I know it is not dead because I can see the apple logo on, and every time I connect it to a USB port to charge, or a wall charger, the battery appears with a bit of red. Still, it wont turn on. It's been like this for three days now and I haven't stopped charging it. IT just WONT charge? Any tips I can use to solve the issue?
-EstebanHello estebie67,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like the iPhone is experiencing issues upon startup, and may not be loading the firmware or operating system correctly. If you have not already done so, try resetting the iPhone while connected to power:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, it will be best to restore the iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
please help i upgraded my iphone5 to new ios7 yesterday 2pm and untill now its already 17hours and why cant access or back to normal?is this normal or stil upgrading? it only appears the apple logo on screen and keep coming the logo screen on and off.do i need to bring my phone to apple center or is this iops 7 takes longer time or an hours to successfully upgraded.please help me what can i do?
Anyone have any suggestions? or is everyone else just as clueless as me !
-
Why does my Ipad 2 keep going black ahd back to the apple logo. It eventually goes to the home screen and allows me to try something else but after about 30 seconds it happens again. I have already rebooted several times?
Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings -
During/after upgrading to ios8.1 my ipad air is looping is a screen where i see the apple logo after a minute or so i see a flash of bleu then black en the it starts over again....i can't even turn of. Help?
Hi,
Had the same issue. Hard reset not working.
What I did was: start your mac/pc and open iTunes, hold down the home button of the iPad (and while holding the button), connect it to the PC with the cable.
Keep pressing until you get a pop-up asking to upgrade or restore.
Hope this helps for you!
Xavier -
On my Iphone 4s, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. A few days before that the speaker suddenly stopped working during a call. I also reset everything by connecting to itunes but no luck then. help?
Hey there xntricj,
It sounds like you are putting a password for your Apple ID that works without issue on your iPad into your iPhone but get a message saying that the password is incorrect. I recommend the steps from the article named:
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
After completing iOS 7 setup, go to Settings > iCloud.
Scroll down and tap Delete Account, then enter your previous Apple ID and password.
If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I have restored my iphone 3gs after having only the apple logo, it took me through all the restore, a page saying 'congrats your phone is now unlocked', and allowed me to chose to set up from new or back up....yet still displays only the apple logo.
Restore as New...
Redownload your Purchased and Free Apps using the Apple ID you Originally used...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?
I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.
-
What could be wrong with my iMac? When switched on the screen displays the apple logo with a busy bar at the bottom of the screen. This displays the progress of the computer trying to do something. To fill the bar takes about 30 mins and then switches off
Which OS X is installed?
-
My iPhone 5 is stuck on the Apple logo after trying to update it
My iPhone 5 is stuck on the Apple logo after trying to update it - brought brand new today
have you tried holding down the home button and lock button at the same time for 60 sec?
-
Why did my iphone 4 just go to the apple logo then go straight back to the home screen?
I was just listening to music on my iPhone when all of a suden my music cut off. I looked right at my phone to see that it went to the apple logo then a few seconds later it went right back to my home screen. The only thing I had open on my phone was my music and a text message I left open for a moment. Is there a reason why my phone shut off? Is somethign wrong? Or am I jsut worrying for nothing?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
I tend to use Bridge ALOT and just recently i have come across the warning message above, t won't let me open my RAW images in Camera Raw in Bridge. Please could someone help me solve this problem it has hulled my work and its pilling up behind me Th
-
LACP with Weighted Load Balancing
Hi, I am trying to figure out how to use weighted load balancing (WLB) with LACP in Nexus 5K. Please can you give any duidance on this because the documentation I found so far is not helpful. Basically I have a port channel cosisting of two physical
-
Frequent block Corruption....
Hi, Oracle documents mentioned , block corruption rarely happens but i have to frequently face this problem ,mostly logical corruption. And when this happens i have to recover that datafile from the backup which is very much time consuming and loss t
-
Error message when trying to upgrade to 9.0
every time i try to upgrade to the new version for windows vista it always says "invalid drive:F" can someone please tell me what that means?
-
Can I quickly 'go to' a particular photo ID number in Library view?
In (for example Word) you can click F5 and then type a page number that you want to quickly be taken to view. In LightRoom Library view, each photo displays a lovely ID number, but why? Can I press something, like F5, and then type in my desired ph