My iphone4 is not recognized by my mac

I cant do an update on my iphone. I plug it into the computer and the only thing that happens is the phone starts to charge. I have deleted itunes and reinstalled as well as a few other tips and tricks online with no success. I have an iphone 4, an ipad 2, iphone 2 and I am running on a MacBook. Any suggestions at this point would be awesome....otherwise I guess I am hauling all of my devices to the Mac store???

Mine is doing the same (suddenly) I synced fine on the last Frisday in July and then suddenly I couldn't see my phone in iTunes the follwing Monday. My co-worker purchased a brand new iPhone4 1st week in August and no PC/Laptop weill detect his brand new phone?

Similar Messages

  • Ipod not recognized by any MAC computer

    I have a 20gb IPOD 2nd generation which has worked fine until recent itunes and tiger software upgrade. Now Finder nor utilities (ipod updater) nor itunes will recognize the ipod when connected with firewire-- even in disc mode. Ipod is not recognized by any MAC computer (several tried in Apple store). I ran diagnostics and everything checks out on the ipod. Please help.

    When I got a different charger later that night, my Ipod was charging but a message popped up saying "USB device not recognized".
    This article may shed some light...
    Powering Apple and third party peripherals through USB

  • My iSight is not recognized by my mac, even in the picture changing of my profile. Can anyone help?

    My iSight is not recognized by my mac, even in the picture changing of my profile. Can anyone help?

    http://discussions.apple.com/docs/DOC-6431

  • TS1591 After updating Itune to 11.1.4, my ipHone 4 is not recognized on my Mac 10.9.1

    Please help.
    After updating Itune to 11.1.4, my ipHone 4 is not recognized on my Mac 10.9.1
    I can't connect to sync to my ipHone or even download photos via cable

    Hello jml009,
    The following article can help get your iPhone to appear in iTunes again.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • Iphone not recognized in itunes mac os 10.8.5

    i'm running mac osx 10.8.5
    my iphone4 is 7.1.2
    updated itunes to 12.0.1
    and now both my iphone and my ipad are not recognized by itunes, yet my iphoto does recognize them
    plese help

    Have you tried everything in this Apple support document?
    iPod not recognized in iTunes and Mac desktop
    Does the iPod still appear as an externally mounted drive within Finder?
    B-rock

  • My ipod model M9282LL will not connect to itunes, is not recognized by my Mac! help

    My older ipod is not acting correctly! I tried to reset it but when I plug the ipod into the Mac, it is not recognized on screen. The menue buttons as well as others are unresponsive. Is my Model M9282LL past its ability to be repaired or restarted?

    Are you sure the hold switch on this older iPod has not been activated or been moved to the On position?  Does the iPod power on?
    B-rock

  • My iPhone4 is not recognized by iTunes over wifi.

    While I have been having issues synching both my iPad2 and my iPhone4 over wifi to iTunes (error message would occur) recently the problem seems to have gone away for my iPad2, but not iTunes is not recognizing my iPhone4 via wifi. I have checked to make sure I am on the same network and even synched via cable, unchecked the wifi synch option and then reselected it. Still, iTunes does not see my phone. Any help/thoughts are appreciated.

    Tom,
    I have the same issue!

  • Matshita UJ-857 superdrive not recognized shown by mac????????

    My macbook was working fine yesterday and then today I put a cd in and it accepted but it didnt show on desktop. It then would not let me eject the disk.
    I checked in system profile and under ata and disc burning it now shows nothing?? Toast and itunes also can no longer detect a drive. I can hear the drive spinning when I power up. I took the laptop apart to check connections and everything seems fine.
    Ive read a lot about the superdrive 2.1 update but I got this back in July or something and had no problems and since the drive is not even shown is system I guess its not this. Anybody any ideas???
    Also i dont have applecare and am out of warranty so looking for a fix myself, do I just need to replace drive?? But why would it still spin and have power if its broken??
    I have already tried resetting the smc and pram (think thats what they were called).
    Thanks for any ideas

    I have the same problem, it only started since I installed the latest security update and version of itunes. the first problem I encountered was that software I had installed would not open due to a shared library fault with quicktime. this was resolved by installing the latest version of quicktime.
    now when I try and burn a CD it gives the message that the 'disc burner or software not found'. when I check in preferences the drive is listed under burning although it is not recognized in the system profiler.
    The CD drive loads CD's though as I am able to play a video game that needs the disc inserted. any ideas on what I should do? do I have to reboot?

  • Standard audio CD stuck and not recognized inside of Mac Mini

    I put a standard CD into the Mac Mini and now it does not show up on the desktop or iTunes or is acknowledged in any way. So, I cannot eject it. Just before this I tried to insert another CD and it would not take it in at all. The CD that is now stuck inside the Mac Mini worked just fine on the same computer earlier in the day.
    I have restarted, shut down and restarted, all to no avail. I cannot tell if the CD spins up at startup or not. I've tried a few different backdoor ways to eject media, but since the computer not even recognizing it has a CD inside there is, in theory, nothing to eject.
    This is the current gen Mac Mini. I've been ripping a lot of CDs lately and this computer is a dedicated music server.
    Thanks for any help.

    Hello Andrew,
    I have posted the following in the MacBook Pro section, and I've received some replies from users that it worked for them:
    If the disk is not readable at this point, then it sounds like the disk is probably stuck against the bezel of your computer (like it missed the slot that it's supposed to slide out of).
    If you are not into taking risks, then get it serviced now. Removing a stuck disk should be covered under warranty (as well as checking the alignment of the drive).
    Otherwise, if you are adventurous, then keep reading.
    If the disk does not eject when you start up holding down the mouse button during startup, then it may be physically stuck.
    One example could be if the drive and the slot in the computer's case are slightly out of alignment.
    In that situation, the drive would have partially ejected the CD, and therefore it would no-longer be readable. So, the computer will not acknowledge that there is still a disk in the drive.
    But, if the disk is jammed against the edge of the case, then it may not be able to eject fully.
    There are methods to try and un-stick a CD that is stuck because of an alignment problem. But, neither is really 100% safe to try.
    1) You could try and slide something extremely thin between the CD and the drive's slit on the case to help guide it out. But, you risk damaging something if you don't do it just right. You could also make it worse.
    2) You could take a credit-card or another CD and try to re-seat the disk fully in the drive. The idea here is that if it is partially ejected, then this might help to fully seat the CD back into the regular location that it sits in when being read. This might enable the computer to read the CD again, and possibly eject it once it acknowledges that the CD is present. But, again this method could potentially cause further damage.
    My concern with the second option, is that you might miss the CD and push on something else. Likewise, if you exert too much pressure, you could force the disk into something further inside the drive. And, another concern is that if the drive does grab the CD and try to spin it before you release pressure, then you could cause another problem.
    Basically, these are only thrown out there for the truly adventurous. If that isn't you, then don't do anything outside of software controls and keyboard / mouse controls to eject the disk.
    The risk of trying one of the physical methods is that you might void a warranty that would otherwise have replaced the drive for you.
    Anyway, I hope my thoughts and ideas are helpful. Let me know if anything works for you.

  • My newly purchased Kingston 19-in-1 card reader is not recognized by the Mac

    I just received my Kingston 19-in-1 card reader and connected it directly to the back of my iMac (iintel) running on OS X Lion 10.7. It did not show up. I checked Disk Utility and it shows the following:
    Info EOS Digital
    Name: EOS Digital (my Canon DSLR)
    Type: Partition
    Mount Point: Not mounted
    File System: MS-DOS (FAT 32)
    Connect bus: USB
    Writable: Yes
    Capacity: 4.11 GB
    Can be formatted: Yes
    Partition number: 1
    I am positive the problem is due to the MS-DOS (FAT 32) file system (my other laptop is a PC running on Windows Vista), but I  don't
    know how to fix this. Since i did not want to lose any files on my CF card, I took a blank formatted card (formatted in camera) and took 2 photos. When connecting the reader to the Mac it did not register.
    I have a Sandisk 8-in-1 card reader which worked just fine on the PC, and the Kingston reader also works on the PC (after i tried all the above ). I have read other forum discussions whee people say that the Kingston card reader works on their Mac
    I am getting desperate. Can someone help me?
    By the way, I checked on two Apple Stores to try and get tech support and got "voice mail jail" which is most disappointing. I suspect this is Apple company policy forcing me to make an appointment (which I am willing to do, but for heavens sake, don't cut me off on the phone!)

    Thanks for your response. I plugged the Kingston card reader into my Mac this morning before turning on the computer and lo and behold, the test photos appeared. I wonder if there is a procedure where one as to do certain things first (e.g., connect card reader first before turning on computer). I will stick to the same computer port from now on. I do not consider myself out of the woods as I have to try this using Adobe Lightroom to post-process my photos.
    As for the software updte, Kingston advised that the update is not compatible with Macs, so I did not update.

  • IPod not recognized by any Mac or PC it's been hooked up to

    20GB w/color...oldie but a goodie.
    But after installing 7.7, it stopped being recognized by iTunes or my G5, period. Was hoping after 7.7.1 that it would reappear, but no luck. When I installed 7.7.1, it appeared on my desktop for a moment, but when I tried to launch iTunes my screen suddenly vomited up this white-type-on-black-bars PC code-looking message up in the upper left-hand that said something about a kern panic. After that, I might as well hook a bar of soap up to my G5, for all the good it does me.
    I've gotten as far into the "5Rs" as I can, which isn't very far since you need your 'puter to actually SEE your iPod to execute them, and even tried restarting in disk mode...no luck.
    Sometimes my Disk Utility will recognize an iPod hooked to the USB, sometimes it just names it "device".
    Took it to work, tried it on my work station there with a different USB even. Nothing. At least at work my iPod goes to the DO NOT DISCONNECT screen, but even after leaving it hooked up for hours, still no joy.
    Even tried plugging it into a co-worker's PC, for giggles. Still nothing.
    iPod still takes a charge and chugs along merrily, oblivious to its abrupt status as an orphan.
    I've done everything I know. Used to be able to solve any of my iPod hiccups before, but I'm stumped.
    I have a sinking feeling that either the 7.7.1 update somehow scrambled my iPod so it can't be recognized, or Apple's decided my iPod is obsolete and it's no longer supported by 7.7.1.
    Help, anyone?

    I'm confused, you state they already tried to make it work with a computer at the Apple Store. So if they could not get it to work then why would they now? If their computer could not see the iPod there is no way to Restore it in iTunes.
    Incidentally, have you tried connecting it directly to a USB port on the back of your computer (if you have a desktop), and disconnecting all other USB devices except your keyboard and mouse? If you do this can you see the iPod in Device Manager?

  • IPhone 4 (iOS5) not recognized by updated mac???

    I have an iPhone 4 and updated to iOS 5 last week. My iTunes is also updated on my Macbook (running Snow Leopard). However, after updating everything, my Mac doesn't even recognize my iPhone 4 when I plug it in. It doesn't happen every time, but it does more often than not. Has anyone else run into this problem? If so, have you found a solution?
    The last time I tried to sync, I had to update other software on my Mac, and then restart. And then it worked. However, this time, my Mac is completely up-to-date. So, I have no idea how to get my computer to recognize my phone by USB or wifi.
    Please help!
    Thanks,
    Curtis

    Try this iPhone assistant to troubleshoot your issue:http://www.apple.com/support/iphone/assistant/itunes/

  • I have an ipod nano that is not recognized by my mac

    I have an ipod nano that i bought years ago and I origanly had it sync to a old computer that was stollen! I am now trying to sync it to my new mac but the computer dos not recognize it.

    try resetting ur
    pc and device for 20 minutes
    enter DFU mode on your ipod
    if it is jailbroken make an restore
    for your device that may help you

  • 2nd Gen Ipod Shuffle is not recognized by Power Mac G4 Mirror Door

    When I first bought my Shuffle and connected it to my G4 it worked flawless, i put my music on the shuffle and charged it . About 3 weeks later i went to put some new music on it and i plugged it into the dock (iTunes usually comes up automaticly and it shows that my shuffle is connected to the computer), this time it didnt open iTunes and the ipod icon didnt show up on the desktop, i tried taking it off the dock and unplugging it from the computer then plugging it back in and it still wasnt getting recognized. My ipod still plays music fine but when i connect it to my G4 it just blinks amber once and then thats it, nothing happens. Anyone else have similar problem? I cant figure it out.
    Power Mac G4 Mirror Door   Mac OS X (10.3.9)   Power Mac G4 dual 1 GHz prossesors,1.5 GB of RAM, and 200 GB HD

    When I first bought my Shuffle and connected it to my
    G4 it worked flawless, i put my music on the shuffle
    and charged it . About 3 weeks later i went to put
    some new music on it and i plugged it into the dock
    (iTunes usually comes up automaticly and it shows
    that my shuffle is connected to the computer), this
    time it didnt open iTunes and the ipod icon didnt
    show up on the desktop, i tried taking it off the
    dock and unplugging it from the computer then
    plugging it back in and it still wasnt getting
    recognized. My ipod still plays music fine but when i
    connect it to my G4 it just blinks amber once and
    then thats it, nothing happens. Anyone else have
    similar problem? I cant figure it out.
    Is the Shuffle dock connected to one of the REAR USB ports? What does Apple System Profiler say about the USB tree? Does it show the Shuffle?

  • New iPad mini is not recognized by my Mac.  Is asking for an iTunes update to 10.7, but Mac says system is up to date at the iTunes version we have.  iPad mini just not recognized without the updated iTunes,  HELP

    The kids have 3 new iPad minis for Xmas, but our Mac will not recognize the devices when we connect the minis to it.  The Mac/iPad says it needs a newer version of iTunes, but the Mac says that it has the latest version of iTunes. The kids can't transfer their music, books, photos, etc from the Mac, where everything is centrally stored, to their new minis. :(. Can any one help?

    What itunes version do you have?
    What Mac OS version do you have?
    From the ipad mini box and web page:
    Apple ID (required for some features)
    Internet access6
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 2 or later
    Download iTunes at "www.itunes.com/download

Maybe you are looking for

  • Surround Sound over Airport Express ??????????????

    @all installed Airport Express over optical Monster Cable i will send my stereo Audio over the Airport Express to my AV Receiver. now u use a plugin, that the stereo files will played in surround modus, so that the stereo Front send automaticl to the

  • Again : HTML-form in report body- error

    I want to display a report based on a complex view, but I want to make each record updateable via an HTML-form. I added to the view a column which generates HTML, but when I change the combobox, I get an error in the status-bar of the browser "Object

  • I can't download Project Siena Beta3 from Store

    Dear officers, First of all thank you for developing "Project Siena" I was waiting for Beta3 for a long time. I am a little disappointed when I first saw whats new in the third Beta. I was waiting for Barcode / Text recognition (via camera) implement

  • Email Problems again on Second 3G

    It seems that this second phone is beginning to have the same problem as the first.... Now I have to restart twice a day instead of just in the morning before work. I now have to restart in the morning and evening before leaving from work to send and

  • Change SIA node name after restaure

    hi, we have backup an XI31 system (on server named AAA) and restaure it on another windows server ( named BBB). on CCM the SIA name is SIA.AAA on CMC the node for each server XI is AAA the pid for each server is AAA.server.pid how to change this node