My Iphone4 is **** slow after IOS7 please help

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable. iOS 8 seem to make the iPod more sensitive to marginal cables.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

Macbook Slow after Yosemite--Please Help

My macbook ran fine until I upgraded to Yosemite.   I have beach balls all the time and
it will shut down my apps. Need help and fast.
Problem description:
macbook pro runs slow after upgrading to OS X Yosemite
EtreCheck version: 2.1.8 (121)
Report generated February 23, 2015 at 12:25:49 AM CST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.9 GHz Intel Core i7 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 498
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 2 days 1:22:50
Disk Information: ℹ️
    APPLE HDD TOSHIBA MK7559GSXF disk0 : (750.16 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 748.93 GB (527.76 GB free)
            Core Storage: disk0s2 749.30 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.loginwindow.LFVTracer.plist
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [failed]    com.zeobit.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    ShopAtHome.com extension
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 748.93 GB Disk used: 221.17 GB
    Destinations:
        My Passport for Mac [Local]
        Total size: 2.00 TB
        Total number of backups: 4
        Oldest backup: 2015-01-18 00:20:15 +0000
        Last backup: 2015-01-18 03:03:13 +0000
        Size of backup disk: Adequate
            Backup size 2.00 TB > (Disk used 221.17 GB X 3)
Top Processes by CPU: ℹ️
        12%    mds
         5%    WindowServer
         3%    coreaudiod
         1%    Jigsaws Galore
         1%    fontd
Top Processes by Memory: ℹ️
    644 MB    Safari
    395 MB    softwareupdated
    301 MB    com.apple.WebKit.WebContent
    180 MB    mds_stores
    77 MB    Jigsaws Galore
Virtual Memory Information: ℹ️
    1.15 GB    Free RAM
    4.85 GB    Active RAM
    1.42 GB    Inactive RAM
    984 MB    Wired RAM
    6.35 GB    Page-ins
    322 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 21, 2015, 04:52:57 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-21-165257_[redacted].crash
    Feb 21, 2015, 12:15:06 AM    /Library/Logs/DiagnosticReports/LegacyFileVaultMessageTracer_2015-02-21-001506_ [redacted].crash
    Feb 20, 2015, 11:02:45 PM    Self test - passed

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I can not play any kind of video on my ipad 3 after i installed ios7 please help me

i can not play any kind of video on my ipad 3 after i installed ios7 please help me

I had to reset it again and use the desktop software reinstalling the entire basic software. On your desktop blackberry software go to the software up date thoght tools and if there are no newer veresions available, chose the botton for las version and intall it.

My iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist

my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist ,please help me

uninstall all iTunes,5 programes,this worked for me after reinstall them

Hello Since yesterday evening. My itunse program does not work my mobile. Note I update the program to ios7 Please help me Thank you

hi
Hello
Since yesterday evening. My itunse program does not work my mobile.
Note
I update the program to ios7
Please help me
Thank you

I found this strange glitch that wouldn't let me open my iTunes Store. I tried all the reset options and still iTunes would close a second after it opened. I fixed this. Instead of using the iTunes Store icon on your home page to open it. Go into music and click on store. It will say "Cannot Connect To Store". Just tap ok. Then tap on "featured" on the bottom of the screen. That will take you to the store front page. After that is loaded. Back out and the icon for iTunes Store on the home page should work just fine. Hope that helps.

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Since up dating my Firefox I can not play any games on Facebook they all run very slow, can someone please help me with a solution.

Since up dating my Firefox I can not play any games on Facebook they all run very slow, can someone please help me with a solution.It mainly seems to be with games.

RE: "P.S. I found it aggravating that I couldn't copy and paste text here, it wanted me to insert as a link or an image, how do you insert plain text?"
I take it you tried using the "right click" menu? That doesn't seem to work, as you noted, but, you should be able to paste text by pressing your CTRL key and while holding it down, press the "V" letter key.
CTRL + C = COPY
CTRL + X = CUT
CTRL + V = PASTE
HTH,
Ortho_Fan

Why that when I record a video in my iPhone 4s then I will transfer it to my laptop, the video is in slow motion? Please help so that I can use always my video recording feature. Thanks!

Why that when I record a video in my iPhone 4s then I will transfer it to my laptop, the video is in slow motion? Please help so that I can use always my video recording feature. Thanks!

Video is synced from the computer to the iPhone via iTunes. You need to load the video into iTunes, make sure it is iPhone compatible before you do that, and once it is in iTunes, then sync to the iPhone.
Never said what computer OS you were using. Also, the computer processor, amount of RAM can make a difference with HD video.

How to update my old ios 6.1.4 to iOs7 please help me..

how to update my old ios 6.1.4 to iOs7 please help me..

You cannot do this if you are not a paid developer. If you are a paid developer then please sign into the Apple developers forum.

Native Calendar app crash in ios7 - Please help

I successfully updated my iPhone 5 to ios7 however, the native calendar app carshes everytime I try to open it. I tried to power down and on again but still the same. Please help. What should I do?

I don't want to give the wrong advice here. Maybe Ann154 or tikibar1 can jump in to advise you on this. The calendar is present on my Galaxy S4, but it is from a different carrier.
Edited to add: I see that you have done a factory reset on your device. Have you checked the disabled apps list to see if the Calendar app shows there? This shouldn't be the case after a reset, but this is the only thing that I can think of.

My Hard Drive Won't Slow Down! please help

Hi everyone,
I just got my B&W powermac up and running again after some upgrades: a radeon 7000, 500 Mhz Sonnet G4, 1gig of RAM... Well all of a sudden my hard drive just spun all the way up and will not slow down no matter what. I went to system preferences and checked "put discs to sleep when possible" - Nothing. I ran Onyx and cleared all my caches and what not - Nothing. I have restarted, reset my PRAM, pressed the CUDA button... I'm out of ideas. And my hard drive is raging like it is booting up or something so I don't know what to think. Please help me slow my hard drive down. It is a WD Caviar 40G, and I am running OS 10.3.9 and it is totally up to date. Thanks so much for any suggestions!
-Kurt

I don't think it's a ribbon issue. I checked it out. As for the jumpers, I'm not really sure exactly what to look for. I have only messed with jumpers one time and I was following a chart to set up a slave drive on a Dell and it was a long time ago... On My B&W, what exactly would I looking for if it was a jumper problem?
Thanks again, in advance!
-Kurt
PSL here are the specs on my HD if that helps at all
WDC WD400BB-00DEA0:
Capacity: 37.27 GB
Model: WDC WD400BB-00DEA0
Revision: 05.03E05
Serial Number: WD-WMAD11139002
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: Yes
Mac OS X:
Capacity: 27.51 GB
Available: 20.52 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s6
Mount Point: /
Mac OS 9:
Capacity: 9.76 GB
Available: 9.46 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s7
Mount Point: /Volumes/Mac OS 9
iBook G4 1.33Ghz with 1.25Gb of RAM//Powermac G3 (sonnet G4 500mhz) Radeon 7000 Mac OS X (10.4.7)

Serious Issues after update, PLEASE HELP!!!!

Two nights ago i did a software update. Shut the computer down everything was fine. Im not sure the software update worked properly. When i restarted the computer later that evening, all i got was the gray screen with the apple. A friend was searching forums for me over the internet while we were trying to fix it. Did the CTRL OPTION R P thing and that didnt work. Did the CTRL S and that didnt work. Next day went and bought a Snow Leapord cd. After three hours the status bar moved appx 3/4 of an inch. Took it to apple. They wiped the Hardrive clean and reinstalled Snow Leapord to it. Now it restarts and operates. However, it takes about 15 min for it to start up and get to the desktop and it runs TERRIBLY slow. It has a 500g hard drive that was put in 2 weeks ago. It also has 2g of RAM. After taking it to apple it is only showing 1.5G of RAM after the wiped the hard drive. PLEASE HELP ME!!!!!! Everything was working fabulous prior to 2 nights ago.

Well I just rewiped the hardrive clean and reinstalled snow leapord. IT WORKED!!!!!! Computer is running fast as could be, start ups in less than 30 seconds, no lagging. Im really happy as i bought this computer from a good friend and its less than a week since ive had it. I think ill just live with the ram still showing 1.5g. I think ill wait and just go get 2 4g sticks when i get around to it that way It will be as fast as possible and ill be using the ports to their full potential.

Imac slow and Freezes PLEASE HELP!

PLEASE HELP!!!
Hello i have and imac G5 i bought it in about june of 2005...
It was running very slow and always freezing and then i upgraded the RAM to 1gb
and it started working much better. then i upgraded to OS Leopard andalso pro tools LE 7.4
and since then has been performing slow and freezing all the time. ai recently added another gig of RAM just to see if that was the problem , but it seems to be working just as slow. Does anybody know what it might be. Its a 1.6 GHZ power PC G5 and has a 80GB HD and have about 20 GB free so i dont think thats it. Please let me know if any of you have had this problem or know how to fix it thanks

Except for the keyboard & mouse, disconnect all devices from your computer.
Repair your disk from your System DVD.
Repairing permissions from the Tiger or Leopard DVD
Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
Once this process has been completed restart your computer.
===============
Get a larger HD
===============
Use Software Update to update your OS to OS 10.5.6.
Afterwards, repair permissions & restart your computer.
Your system info confirms you are still using an outdated version - OS 10.5.4.

Slow Macbook Pro- please help, I don't understand previous advice.

Hello all,
I have a very slow Macbook Pro running on Lion 10.7.3.
I looked up this problem on the forums before I sent this message but I didn't quite understand the advice. I have been on something called Disk Utility and Activity Monitor but don't really understand what I'm looking for. It seems a large percentage of my mac is 'idle' if that makes sense. Someone said to look at Page Out but I really don't understand what that means and what sort of numbers are normal.
I do have some storage left so I don't think it could be that. A lot of my gigabytes seem to be taken up by movies and 'other'. I've tried deleted a load of videos but it hardly made a difference. I have Mac Mail and it seems very slow on my Macbook compared to on my Ipad and iphone. iCal is also very slow on here and it always takes a while to load internet pages. It isnt the wifi connection.
Please help and bear in mind I am by no means a Mac whizz so you might have to talk in layman's terms!
Thanks,
Amy

If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message.

Sales Api Is not working After Intializing(Please help it's urgent)

Hi all,
When i am executing an sales api to create lead in sql+ it s executing fine,but when i am executing the same api after intializing in SQL+ or in concurrent request,it is troughing an error like
AS_SALES_MEMBER_PVT Using Fn....
Please help Me and also look into the code...
DECLARE
q_sales_lead_id NUMBER (8);
q_sales_lead_line_out_tb VARCHAR2 (300);
q_sales_lead_cnt_out_tbl VARCHAR2 (500);
q_return_status VARCHAR2 (10);
q_msg_count NUMBER (10);
q_msg_data VARCHAR2 (800);
a_return_status VARCHAR2 (10);
a_msg_count NUMBER (10);
a_msg_data VARCHAR2 (800);
q_noteid NUMBER (4);
x_sales_lead_line_out_tbl as_sales_leads_pub.sales_lead_line_out_tbl_type;
x_sales_lead_cnt_out_tbl as_sales_leads_pub.sales_lead_cnt_out_tbl_type;
l_sales_lead_rec as_sales_leads_pub.sales_lead_rec_type;
l_sales_lead_line_tb1 as_sales_leads_pub.sales_lead_line_tbl_type;
v_party_id NUMBER (10);
v_resource_id NUMBER (10);
v_group_id NUMBER (10);
v_person_id NUMBER (10);
v_org_id NUMBER (10);
v_customer_id NUMBER (10);
v_primary_application VARCHAR2 (150);
v_secondary_application VARCHAR2 (150);
v_lead_provider_type VARCHAR2 (150);
v_nomenclature_final VARCHAR2 (150);
v_segment VARCHAR2 (150);
v_nomenclature VARCHAR2 (150);
v_nomenclature_1 VARCHAR2 (150);
v_segment_1 VARCHAR2 (150);
v_fleet_mix VARCHAR2 (150);
v_category_set_id NUMBER (10);
v_category_id NUMBER (10);
e_msg VARCHAR2 (500);
v_party_name VARCHAR2(150);
out_param VARCHAR2(150);
CURSOR c1 IS
SELECT a.*, ROWID
FROM al_vendor_sms_crmlead_in a
WHERE a.msg_flag = 'N' AND a.customer_code IS NOT NULL
AND a.models IS NOT NULL
AND a.fleet_mix IS NOT NULL
AND a.segments IS NOT NULL
AND a.lead_provider IS NOT NULL
AND a.secondary_app IS NOT NULL
AND a.cp_mobile_no IS NOT NULL
AND a.id='L';
BEGIN
For i in c1 LOOP
BEGIN
out_param :='phone validation';
SELECT ppf.party_id
INTO v_party_id
FROM per_phones pp, per_all_people_f ppf
WHERE ppf.person_id = pp.parent_id
AND pp.phone_type = 'M'
AND pp.phone_number = i.cp_mobile_no
and rownum<=1;
out_param:='Resource_invalid';
SELECT jtf.resource_id, jtm.GROUP_ID, jtf.source_business_grp_id,
jtf.source_id
INTO v_resource_id, v_group_id, v_org_id,
v_person_id
FROM apps.jtf_rs_resource_extns jtf, apps.jtf_rs_group_members jtm
WHERE jtf.resource_id = jtm.resource_id
AND jtf.end_date_active IS NULL
AND jtm.delete_flag = 'N'
AND jtf.user_name NOT LIKE 'ALM%'
--AND jtf.attribute5='Sales'
AND jtf.person_party_id = v_party_id
AND ROWNUM <= 1;
out_param:='Party_invalid';
SELECT party_id,party_name
INTO v_customer_id,v_party_name
FROM apps.hz_parties
WHERE status = 'A' AND party_number = i.customer_code;
out_param:='Sec_prim_application_invalid';
SELECT parent_flex_value_low, flex_value
INTO v_primary_application, v_secondary_application
FROM apps.fnd_flex_values_vl
WHERE parent_flex_value_low IN (
SELECT flex_value
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009667
AND enabled_flag = 'Y')
AND enabled_flag = 'Y'
AND TO_NUMBER (TRUNC (SUBSTR (attribute1, 1, 2))) =
i.secondary_app ;
out_param:='Segment_map_invalid';
SELECT Upper(REPLACE (regexp_replace (i.models, '(\s*[[:punct:]])'), ' '))
INTO v_nomenclature
FROM DUAL;
SELECT flex_value
INTO v_nomenclature_final
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009798
AND enabled_flag = 'Y'
AND end_date_active IS NULL
AND REPLACE (regexp_replace (flex_value, '(\s*[[:punct:]])'), ' ') =
v_nomenclature
AND ROWNUM <= 1;
SELECT flex_value
INTO v_segment
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009632
AND enabled_flag = 'Y'
AND end_date_active IS NULL
AND TO_NUMBER (TRUNC (SUBSTR (flex_value, 1, 2))) = i.SEGMENTS;
SELECT ffvh.flex_value, ffv.flex_value
INTO v_nomenclature_1, v_segment_1
FROM apps.fnd_flex_values_vl ffvh, apps.fnd_flex_values_vl ffv
WHERE ffv.flex_value = ffvh.parent_flex_value_low
AND ffvh.enabled_flag = 'Y'
AND ffv.flex_value_set_id = 1009632
AND ffv.enabled_flag = 'Y'
AND ffvh.flex_value_set_id = 1009798
AND ffvh.parent_flex_value_low = v_segment
AND ffvh.flex_value = v_nomenclature_final;
out_param:='Lead_provider_invalid';
SELECT flex_value
INTO v_lead_provider_type
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009718
AND end_date_active IS NULL
AND TO_NUMBER (TRUNC (SUBSTR (flex_value, 1, 2))) =
i.lead_provider;
out_param:='vehicle_res_invalid';
SELECT lookup_code
INTO v_fleet_mix
FROM apps.fnd_lookup_values_vl
WHERE lookup_type = 'VEHICLE_RESPONSE_CODE'
AND enabled_flag = 'Y'
AND TO_NUMBER (TRUNC (SUBSTR (description, 1, 2))) = i.fleet_mix;
out_param:='Category_invalid';
SELECT mic.category_set_id, mic.category_id
INTO v_category_set_id, v_category_id
FROM apps.mtl_item_categories mic, apps.mtl_categories_tl mc
WHERE mic.category_id = mc.category_id
AND organization_id = 106
AND description = v_nomenclature_final
AND ROWNUM <= 1;
out_param:='api-Error';
l_sales_lead_rec.customer_id := v_customer_id;
l_sales_lead_rec.status_code := 'NEW';
l_sales_lead_rec.attribute15 := v_segment_1;
l_sales_lead_rec.attribute12:=To_Char( i.expected_closedate,'YYYY/MM/DD HH24:MI:SS');
l_sales_lead_rec.attribute10 := v_lead_provider_type;
l_sales_lead_rec.attribute9 := v_secondary_application;
l_sales_lead_rec.attribute8 := v_primary_application;
l_sales_lead_rec.assign_to_salesforce_id := v_resource_id;
l_sales_lead_rec.assign_sales_group_id := v_group_id;
l_sales_lead_rec.assign_to_person_id := v_person_id;
l_sales_lead_rec.vehicle_response_code := v_fleet_mix;
l_sales_lead_rec.description:=v_party_name||' '||v_nomenclature;
l_sales_lead_line_tb1 (1).category_id := v_category_id;
l_sales_lead_line_tb1 (1).category_set_id := v_category_set_id;
l_sales_lead_line_tb1 (1).organization_id := v_org_id;
l_sales_lead_line_tb1 (1).quantity:=1;
as_sales_leads_pub.create_sales_lead
(p_api_version_number => 2.0,
p_init_msg_list => fnd_api.g_false,
p_commit => fnd_api.g_true,
p_validation_level => fnd_api.g_valid_level_full,
p_check_access_flag => 'Y',
p_admin_flag => 'Y',
p_admin_group_id => v_group_id,
p_identity_salesforce_id => v_resource_id,
p_sales_lead_profile_tbl => as_utility_pub.g_miss_profile_tbl,
p_sales_lead_rec => l_sales_lead_rec,
p_sales_lead_line_tbl => l_sales_lead_line_tb1,
p_sales_lead_contact_tbl => as_sales_leads_pub.g_miss_sales_lead_contact_tbl,
x_sales_lead_id => q_sales_lead_id,
x_sales_lead_line_out_tbl => x_sales_lead_line_out_tbl,
x_sales_lead_cnt_out_tbl => x_sales_lead_cnt_out_tbl,
x_return_status => q_return_status,
x_msg_count => q_msg_count,
x_msg_data => q_msg_data);
as_sales_leads_pub.Build_Lead_Sales_Team (
P_Api_Version_Number =>2.0,
P_Init_Msg_List=>FND_API.G_TRUE,
p_Commit=>FND_API.G_TRUE,
p_Validation_Level=> FND_API.G_VALID_LEVEL_FULL,
P_Admin_Group_Id =>v_group_id,
P_identity_salesforce_id=>v_resource_id,
P_salesgroup_id=> v_group_id,
P_Sales_Lead_Id=>q_sales_lead_id,
X_Return_Status=>q_return_status,
X_Msg_Count=>a_msg_count,
X_Msg_Data =>a_msg_data);
IF q_return_status = 'S'
THEN
UPDATE al_vendor_sms_crmlead_in
SET conv_status = 'S'
WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
ELSE
UPDATE al_vendor_sms_crmlead_in
SET conv_status = 'E' WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
END IF;
EXCEPTION
WHEN No_Data_Found THEN
UPDATE al_vendor_sms_crmlead_in a
SET a.conv_status = 'ERROR',error_description=out_param
WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
COMMIT;
END;
UPDATE al_vendor_sms_crmlead_in SET msg_flag='Y' WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
END LOOP;
END;

Please post this question in the CRM On Demand Integration Development forum.

My Iphone4 is **** slow after IOS7 please help

Similar Messages

Maybe you are looking for