My iphone4 is updated to ios7 and can i get it replaced in warranty
my iphone4 is updated to ios7 and can i get it replaced in warranty
If it has a manufacturing defect and is less than one year old, yes. The operating system it is running is immaterial.
Similar Messages
-
HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and now im getting the error message as "PDP authentication failure" Im using Aircel carrier.
Please let me know how to fix this issueupdate...
I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
Frustrated. -
Updated my iPad and can't get past agreeing to T
Updated my iPad and can't get past agreeing to t&c as the part on my screen where u have to agree is broke. Is there any way around this or will it only be resolved when screen is fixed?
Try a device reset and start over again with the setup.
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
Re-reading the post, I now see your issue more clearly...can you rotate the screen (be sure Orientation Lock is disabled) to have the "agree" tap-able section in a different physical place (out of the bad section) on the screen so the bad part of the screen will be in a different area? Give that a try.
Orientation Lock
About the iPad Side Switch - Apple Support -
After updating to IOS7 I can't get past the passcode screen, I have never used a passcode?
after updating to IOS7 my phone is asking me for a passcode, I have never used a passcode and I can't by-pass this screen, how do I make this phone realize I don't use a passcode?
Hi TuckerCurtis,
If you are having issues with the agreement after updating to iOS7, you may want to try restarting/resetting your device. You may find the following article helpful:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Regards,
- Brenden -
My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!
Hi there Juicy Guava,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
-Griff W. -
How do you get pass the Terms & Conditions page while downloading iOS7. Nothing happens when press AGREE
Reset iPad and continue with update
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I updated to 7. and can't get iTunes to play?
Can anyone help?
Which ipod are you trying to sync rented movies to. The rented movies will only sync to the ipod classic, the new nano, the touch, and the iphone, they will not sync to a 5th generation ipod with video, which people often confuse with the classic.
-
I just updated to ios7 and do not like the redesign. I want the old design back. Has anyone found out how to restore the old appearance. I do not understand why the change. I now have to unlock my phone to be able to check my battery level because my screensaver has a light color in the upper corner and I can't read the text. I want the gray panel back.
See Recover your iTunes library from your iPod or iOS device.
tt2 -
After updating with IOS7, i can no longer control the music on my iPhone with my car controls. I have deleted the phone and re-synced it twice????
Go here: http://www.apple.com/feedback/iphone.html and report it with as much detail as possible.
-
Since updating to ios7 i can no longer partially download emails and this is using up all my data plan. How can I make Mail only be partially downloaded again?
YEA! My jurryrig worked! To all with this problem:
You CAN have podcasts in a regular playlist IF you convert them to a standard MP3 first. So, yes, a lot of manual labor
The good news: if, like me, it is a track that you listen to frequently (in my case meditations for sleep and relaxation) then the time is worth it. I will mess with automator later to see if there is anyway to script this! Then, less work for me and more for my mac.
Here are the steps:
Select the file from your Podcast folder.
Change all data you need -- "artist," "album" etc...
Make a copy of the cover art for this file by dragging it to the desktop.
Select the Advanced -> Convert ID3 Tags menu item.
Check ID3 tag version, and select "v1.0" from the drop-down menu.
Drag the file to the desktop (this will make a copy of the MP3 on the desktop)
Delete the file from the iTunes list.
Drag the copy of the file you have on the Desktop back into iTunes.
Search for the file in the Library, and add the cover art again to the file.
Now the file is out of the Podcasts folder and works like a regular MP3 file inside iTunes. You can re-add it back to playlists! -
HT5594 I updated to iOS7 and I can't turn on the location services feature.
I updated to iOS7 and I can't turn on the location services feature. I have red the " location services and privacy etc" but still the turn on/off button will not respond.
Do you have restrictions turned on?
-
I updated to ios7 and now need to enter a password to open my iphone5. How can I change it to not require that?
Settings>General>Passcode lock>OFF
-
I cannot turn off the asscode which I do not want on mhy ipad. I keep getting a message "iPad is disabled". Yesterday, I updated to iOS7 and was asked
to enter a 4 digit passcode and now I type in the 4 digits and the ipad will not accept it. I want to get to the settings page. Can someone help me?
Thanks.hope you didn't have GREEK keyboard selected
If you did APple do not want to know that their upgrade has trashed your ipad
search on ios 7 ipad greek keyboard
to see other sufferers - if you had a greek keyboard then you need to set it to english/french etc
to do that you need to unlock your ipad
to unlock your ipad you need to re-set your keyboard
to do that you need a greek keboard
to get your greek keyboard back you need to unlock your ipad
and so on and son
thank you apple -
I just updated to iOS7 and an old appleid popped up. My old password is not recognized so I can't delete the account or turn off find my iphone. The old appleid is linked to an email I don't have anymore, and answers to my security ?'s aren't recognized. Is there any way I can reset my account to my new appleid? This has happened to every iphone and ipad in my family that has updated to iOS7.
Hi mabaker2,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
Cheers,
- Judy -
I "updated" my iPhone4S 16gig this morning and can't get past the "Rescue Email" screen. I entered emails as well as opted out. I have gone back, but Apple ID Security insists I add security questions and mail. HELP!
Claudius,either you didn't read my post, or you jumped to conclusions. I had a skype account that was created using a microsoft account (NOT THE ACCOUNT I AM USING NOW). PURE MICROSOFT ACCOUNT NO OTHER ACCOUNT LINKING.I had to change the primary mail of that account.I was told "no can do" by skype support.I found that if I went to account settings and clicked on the link on the line below the one that said "MICROSOFT etc" (labeled something along the lines of "TV or Device") I got the opportunity to set the password of the "live:username" account (WHICH YOU COINCIDENTALLY HAVE TO DO IF YOU WANT TO USE SMART TVs ETC).Once that was done, I COULD SUCCESSFULLY DO WHAT SKYPE SUPPORT SAID WAS IMPOSSIBLE- I could change the primary mail address. once that was done, and NOT BEFORE, I linked the account to a facebook account as well, just to be sure I have more than one way to access the skype account. What caused you to get the impression that I was writing something else? furthermore this sentence - "The solution you described in your initial message isn't actually once since all the time you were operating on different account that weren't actually linked" does not make sense, I think you mis-edited it.and I need to point out that you are incorrect. I WAS NOT OPERATING ON DIFFERENT ACCOUNTS I WAS OPERATING ON ONE SKYPE ACCOUNT, THAT WAS CREATED USING A MICROSOFT ACCOUNT just like you say you recommend. I still don't know how you can misread my initial entry like that. If you have a better solution to my initial problem - changing the primary mail of a skype account created throuth either a microsoft account or a facebook account, Please write a sticky to explain how to do it, and please inform skype support that Yes it can be done, and this is the way it is done. So far my "lucky shot" seems to be the only way to do it.
Maybe you are looking for
-
Custom report #value.FIELD# issue
I've created a report using the custom report layout option. This type of report has field tags #column_name.LABEL# in the heading section and #value.FIELD# in the Body section. The layout of my report requires that some of the values, #value.FIELD#
-
Hi, I want to know about raising exception in wda. Please explain in details. Scenario: I have one input field as mandatory. if i click the button without filling that input field, self defined exception should raise. How to do this? Thanks, Gopi.
-
Does anybody have this problem where you upload your pictures whether it's from your iPhones or camera into your iPhoto 11' and then you go into finder - all images and there you have it, you see doubles even triples of the pictures you have. what in
-
Is there a way to restore an erased history?
My kids have recently started erasing the history on my computer. I want to go back and see what they are looking at. Is there any way to restore a history once it has been cleared? Thanks
-
ABAP in MM: Create PO output program.
Hi, I have been given a project to create an Output program for PO. Can somebody give me the steps or documentation to create ABAP output program. Tcode ME9F will be used to print the form. Below path will be used to update PROGRAM, FORM ROUTINE & FO