My iphone4's one speaker is only working

my iphone4's one speaker is only working. send me some suggestions ...wat to do for it ...

There is only one speaker. The other grill is the microphone.
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

Similar Messages

  • One speaker is not working since long time

    one speaker is not working since long time bought in last december

    I have iphone 4Gs and I can see at bottom there are 2 nets for speakers and I saw with my college has same iphone and sound is coming from both but mine is coming from only from right side.

  • In my hp 4530 one speaker is not working.?

    when i was listening music one speaker had been disappear. plz tell me soltion . i have install driver again the problem not solved

    I have iphone 4Gs and I can see at bottom there are 2 nets for speakers and I saw with my college has same iphone and sound is coming from both but mine is coming from only from right side.

  • I want to make an appointment to fix my iPod because one speaker does not work

    When I plug in my headphone to iPod only one speaker work

    We're iPod owners just like you are.  Locate a nearby store here and call them to make an appointment with the resident "Genius."

  • One speaker isn't working

    I have a powerbook G4. The external speakers both worked for the first couple of years. Recently I noticed that the left speaker does not work. I tried adjusting the balance in system preferences, no luck; it was still balanced. When shifted it to the left, no sound, to the righ-i get sound from the right. Also, I ran a hardware diagnostic which came out normal. No logic board problems as others have posted. I also checked my microphone which is located under the left speaker. The input works fine, but nothing from the left speaker. Please help. Any suggestions with this annoying problem would be greatly appreciated.
    -reed

    That's probably a good news/bad news thing.
    Might have a loose or broken connection, broken trace, or the like. Could be difficult to get at to prove or repair, depending on our comfort level.
    Go to http://pbfixit.com for instructions on getting into the case, unless you have AppleCare of course.
    Joe

  • Only one speaker working with Airport Express

    Hi,
    Hoping for some help. I just connected an Airport Express to my stereo but only one speaker (left) is working. I plugged in headphones to the jack in the AExpress as suggested in other postings and both left and right work there. I have checked and updated Airport Extreme base station and Airport Express firmware software.
    I have an older amp (connecting the RCA cables to the TAPE ports since there is no AUX) but both speakers work for everything but the AirTunes.
    I am hoping there is a fix since I would really like this to work.
    Thanks for any suggestions.
    -Jane
    Mac OS X (10.4.8)

    Thanks for your response and sorry for the delay in
    responding. I did take the first set of cables we got
    (Y-adapter 2-male to 1-mini) back because we thought
    that was the problem. However after I exchanged for a
    new cable we have the same problem. I am thinking
    that the chances are that we would get 2 sets of bad
    cables are pretty slim.
    In both cases only the red cable worked for both
    speakers but if we only plug in the black cable into
    either speaker channel in the amp you can faintly
    hear the music and some static.
    Arg.
    Mac OS X
    (10.4.6)
    Did you ever get the problem with airtunes just playing through the one speaker? I have the same problem...reckon it is a faulty input port on the express. Did you try an optical cable? It might work as it works differently.
    Gaz

  • Volume in one speaker is very low

    Just bought a HP Pavilion dv7-4170eo with Windows 7 64 bit. Yesterday one speaker suddenly stopped working. However, after adjusting the volume to max I've realized that the speaker hasn't stopped working, it does indeed produce sound but in much lower volume than the other one.
    I've checked the balance, reinstalled the drivers, restarted the computer but the problem remains.
    What is wrong here?

    It could be a hardware issue, a bad ribbon cable.
    Call HP ASAP.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • HT1349 Only one speaker works on my iphone4, how can I repair this or is there a setting I can change that I am unaware of?

    I have found only one speaker is working on my iPhone 4.
    IS there a setting I am unaware of or something I can do to fix it?

    If you are referring to the speaker at the bottom of the iPhone, there is only one speaker. The other similar looking item is a microphone.

  • When I plug in headphones or use audio jack only one speaker works.

    I have an iphone 4g.  When I plug in headphones only one side works.  When I plug into my car audio jack...only one car speaker works. 

    There is only one speaker, the other side is the microphone.

  • Intel iMac sound only works out of one speaker, but both headphones...

    Hello.
       I've run into a very interesting problem with the sound of my 20" Intel iMac's sound. Ever since I moved into my new appartment, my Logitech computer speakers have only worked out of the left speaker. The strange bit is that if I plug any pair of headphones into the same jack I get perfect sterio sound. I've check my sound preferences to make sure the sound is balanced, checked multiple pairs of headphones (that are all known to work perfectly), multiple pairs of computer speakers (that are all known to work perfectly), I even plugged in my M-Audio fast track USB audio interface with the same results (left channel only with speakers, sterio with headphones) Another weird thing is that I tested both pairs of computer speakers with my roommate's 20" Intel iMac (same model) and both worked just fine.
      I feel like I've run the gambit of things I could do to eliminate a faulty component. Do you think I have a faulty jack? something wrong with my software/hardware? I'm completely stumpped...anyone have any ideas?

    You've done a lot of testing such that it sounds like the jack and plug combination of the Logitechs and the iMac are just a hair short now, and the move is the only thing that changed. Can you compare the headphone plug and the Logitech plug side by side for length? Is one of them a straight plug and the other a 90 degree such that it can't get all the way in now? I'm sure you've tried pushing it in extra hard or wiggling a bit. One guy on here awhile back sent pix of his headphone port and the one right beside it on the back of his iMac, and the headphone one was recessed slightly deeper into the iMac's body.

  • HT2995 Only one speaker works when playing music. Is this normal?

    Only one speaker works when playing music. Is this normal?

    This being the Mac mini forum, I naturally presumed you were asking about a mini. But in any case, there's only speaker in an iPhone as well.
    Regards.

  • Only have one speaker working out of my ipod shuffle 4

    I have only one speaker working out of my ipod shuffle ?
    Is there anything I can do about this ?

    its probably the headphone jack on your iPod. in which case you will have to replace it, ether thru apple or do it yourself via ifixit.com.
    hope this helps!

  • HT1380 i have an ipod touch 4th gen and ipod touch 5th gen is there a univeral adapter/dock that can work for both? i have recently bought a Sony speaker clock radio but only works with ipod 5th gen, i need an adapter for the 4th gen, is there one on the

    I have both the ipod touch 4th and 5th gen, i recently bough a  speaker/dock but it only works for the ipod touch 5th gen? Is there an adapter that I can use to attach the ipod touch 4th gen to the docking system? 

    bobjbkln that only work if the dock has the 30-pin connector
    bobjbkln wrote:
    How about this lightning female to 30 pin male cable? http://www.miniinthebox.com/lightning-female-connector-to-30-pin-male-connector- cable-15cm_p693543.html

  • I have iPhone 3GS, and everytime I go to listen to my music with my headphones the sound only goes to one ear and when I listen to music with the speakers at the bottom speaker the left speaker only works! Can someone PLEASE HELP ME?

    My music only plays in my left ear when I'm wearing my headphones and when I'm listening to music without my headphones the music only comes out through the left speaker. CAN SOMEONE PLEASE HELP ME,? YOUR HELP WILL BE MUCH APPRECIATED.?

    All iphone have one and only one speaker at the bottom.
    Have you tried another set of earphones?  Maybe they are the problem?
    Have you made sure that the headphones are inserted all the way?

  • How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

    How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

Maybe you are looking for

  • Error while previewing deployed webdynpro application.

    Hi, I am a newcomer to the EP environment. After installing the server and configuring NWDS, I created a simple webdynpro application. I was able to successfully deploy it to the portal but when I try to preview it I got the following error. Please s

  • Pro 9.0 crashes when using typewriter, touchup text, and comment toolbar

    When I try to type something using the typewriter tool or commenting toolbar, I can type a few letters and then I get an error message saying Adobe Acrobat 9.0 has encountered a problem and needs to close. The error relates to the acrobat.dll file. W

  • 4G and Static IP

    So after spending the day getting the run around... i.e. know one in customer service is close enough to the really reason static IP's are not supported on 4 G network/smart phone devices.  Maybe someone in the know , that monitors this forum can ans

  • Runtime error affecting only Encore CS5

    My CS5 Creative Suite 5 Production Studio has run fine up to yesterday, on my 64 bit PC with Windows 7 Professional. Only Encore CS5 is affected...and only when I try to start a new Encore project.  The crash does not happen if I open an existing Enc

  • Hide Units

    Hi all, How to hide units in the report result display? in BI 7.0 queries. for Ex: im getting a value dispalyed as "4029.12 PC". I need to hide the Units "PC" in the report result. Please guide me in this issue. Thanks in Advance. Regards, Ravi