My iPhone4 Says imei and iccid unknown.. Connected to I tunes and now my phone is flashing on and off
Hi.. Freaking out! P
Please help!
My phone fell in water for literally an nano second. Got it out and while the phone was wet, it started wo issue.i placed it in bowl with rice and since then I have been recieving a imei and iccid: unknown screen. I did a bit of research and someone suggested to connect to I tunes and restore. My phone show s that it is updating and installing software. However, my phone is now flashing on and off for several seconds. What's going on? Any ideas out there??
Thanks in advance for your time!!!
right
Similar Messages
-
I was trying to sync and update my phone with ITunes, about 5 minutes into the process everything stopped. Now the phone does not work, it will not turn on or off, the screen of the phone shows the Apple Logo and a straight line. ITunes seems to not "see" the phone. Suggestions??
http://support.apple.com/kb/HT3965
-
I've tried charging it overnight and it still will not turn on, when connected to the charger the apple sign just goes on and off but does not do anything, i've tried resetting it and this also does not work, but then once taken off the charger it doesn't even say the sign for charging it just does nothing
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
-
My phone says IMEI and ICCID unknown, does anybody know what I might do to fix problem?
While it could be a hardware problem (if so, take it to Apple for replacement), it is also a common sign that your attempted baseband update, (or hack) did not apply correctly. Whether it is reparable is not something for discussion on these forums.
-
Hello Apple!
I'm Vietnam, I do not speak the language you have to translate it to google.
I have the old one so bought iphone4 8gb IMEI: 012540006987250 ICCID: 8,984,011,302,509,158,485. After the 7.0.6 update wool restore the computer, it requires icloud id. I do not know what it's id. Because there were so many phone users so no one knows. Now it becomes a paperweight map. Is there a way to reopen the phone there? I hope you can help me, I do not want to waste the money spent, so the phone becomes useless. Thank you very much!Hi there, this isn't Apple but a users discussion forum. For iCloud use your Apple ID.
-
my i phone screen is black i cannot access anything. i am trying to get my photos off of it and when i connect to i tunes it says my phone has a passcode which i cannot enter because my phone is black
It's too late. If you had been syncing your phone with that computer prior to the screen failing, it wouldn't be asking you for a passcode...
-
I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?
Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore. -
HT201210 it says error 6 and it shows connect to i tunes, whats that mean??
it says error 6 and it shows connect to i tunes, whats that mean??
force your phone into DFU mode (search Google) and restore.
-
I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.
Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do -
I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I don't want to proceed and loose these very important photos of family. What do I do to get it out of restore mode? My phone will not allow me to do anything to it at this point. I have the itunes downloaded on the laptop now. When I push the button for the phone it just shows Itunes and plug. I can't even call or open phone up.
Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue. -
i got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this and get my information back?
Every backup replaces the old one, so, unless you included the backup folder in your computer backup routine, you can't get back your calendar info.
The only time iTunes will not replace a backup is, when you use it to restore from, this one will stay in the backup list in iTunes.
More info on backups here: http://support.apple.com/kb/HT1766 -
My MAC has version 10.4.11 and is a Powerbook G4. My ipod touch has version 4.2.1 and will not connect any ideas?, My MAC has version 10.4.11 and is a Powerbook G4. My ipod touch has version 4.2.1 and will not connect any ideas?
you need to install iTunes 10.
in order to install iTunes 10, you need to upgrade your Mac to OS X 10.5.
see system requirements here: http://support.apple.com/kb/DL1061 -
SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U
Please turn off your caps lock.
See http://support.apple.com/kb/HT1212. -
I need help Apple!!!! I keep trying to download apps and it always says "youve already purchased this, so it Will be downloaded Now at no additional charge." And after i try to download it wount download, please help me because im getting tired of this! Oh and i keep going to the already downloaded apps section and i try to download it but it shows the little icloud symbol and i click it but it wount download it please help!!!!!!!
Please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are your fellow users.
As to your problem, try resetting the iPhone:
http://support.apple.com/kb/HT1430
and then try downloading again. If that doesn't work, you may have to restore your iPhone:
http://support.apple.com/kb/HT1414
Hope this helps. Regards. -
I had my iphone 3GS and then upgraded to 6.1.3. Now the phone is in a loop and reboots everytime the Apple logo comes up. I held teh home power and connected to itunes to retore, but it won't restore. any ideas?
Hey harikrishnandhk,
Thanks for the question. I understand you are having issue with your iPhone 3GS. You are definitely taking the correct steps, as you'll want to restore the iPhone in recovery mode. For information on doing so, see this article:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Thanks,
Matt M.
Maybe you are looking for
-
Problem with date format conversion
Hi All, I was trying to load from a flat-file to an ods through psa. the file has a date format which is mm/dd/yyyy. i want to convert that to yyyymmdd. i created a custom object ZDAT for this field of type char with length 10. i wrote a code in tran
-
Pre-order question for iPhone5/Verizon
I have a quick question... My wife and son currently have the iPhone4 with AT&T and they are now out of contract. I'm currently on Verizon. I want to change their carrier and pre-order the iPhone5 for both of them from Verizon. I want to add those
-
Hi, I build a query on a Multiprovider which contains 3 InfoCubes. In my Query I have only one Key Figure and several characteristics. I know from which InfoCube my Key Figure come from, therefore I add the characteristic Infoprovider to the Filter a
-
Is anyone else out there going crazy trying to get Tx Data Sources to work? out of the six connection pools I have, I can only get two of them setup with Tx Data Sources. I am able to make connections to the pools using DriverManager. However, when t
-
When I restore my ipad I do not get my photo albums back. what did I do wrong ?