My iphone4 shut off while charging and will not turn back on how do i fix this

i was charging my iphone when it shut off by itself i have tried turning it on, also have tried plugging it into a different charger and the phone will still not turn on

try holding the home button and off button at the same time for about 10 seconds, it should restart

Similar Messages

  • Officejet 6600 shut down while printing and will not turn back on

    I was printing a few documents on my printer and everythign was working fine, then there was a loud click and the touch screen turned blue and the printer shut down. I could not power it back up using the power button, so I tried unplugging it and re-plugging it and it did not work. I have the device plugged into a surge protector so I plugged it into the wall and it still did not work. (Note: all other devices on surge protector were able to get power, so it was not that). I do not know what to do. I need the printer for business and school ASAP and the product is still under warrenty. The warrenty ends September this year (I believe). I would like to bring it into the store if I can and exchange it, but I do not have the box. I do not know if there is something HP can give me to be able to return the product to Staples, or how long it will take to go through HP for the warrenty, but again, I need this printer ASAP and all of the troubleshooting I've done so far has not helped. This is not the first time the printer has shut down while printing more than one document, however this is the first time it has not been able to turn back on either by pressing the power button or unplugging it and replugging it back in. Any help would be great!

    Hi @Stacki 
    I don't know what Staples return policy is. I suggest calling us so we can help.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. 
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Ipod cut off after plugging it into wall charger and will not turn back on

    ipod cut off after plugging it into wall charger and will not turn back on

    You are gonig to have to take it to an apple store or a specialist as it might be a harware problem.

  • My phone turned off over night and will not turn back on even when plugged in, is there anything that I can do?

    My phone turned off over night and will not turn back on even when plugged in. Is there anything that I can do?

    If you've left the phone plugged in for at least a half-hour with no results, then try holding power and home buttons simultaneously to do a soft reset (settings) only. If that doesn't work, try seeing if iTunes will recognize the device and let the computer charge the device.

  • My iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on.  can you please help?

    my iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on.  can you please help?

    my iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on.  can you please help?

  • I blew a fuse in my house yesterday, and now my imac (desktop computer) will not turn on. How do I fix this without taking it to an Apple store?

    I blew a fuse in my house yesterday, and now my imac (desktop computer) will not turn on. How do I fix this without taking it to an Apple store genius bar?

    cflannigan60 wrote:
    There is no sound or attempt to boot
    Sorry, your only alternative is to take it in for repair. While on your way stop at a office supply store and look into a UPS. if you don't want to go to the Apple Store you can use an AASP, you can locate one in your area by clicking AASP Locator.

  • IPod Touch 5th Gen shut down by itself, and will not turn back on?

    I was just on the YouTube app when suddenly my iPod shut itself down, and the battery was well over 50%.
    It will not turn back on, and when I plug it into the charger, nothing changes. Any suggestions?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. How do I fix this?

    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    When I repair my permissions, this never gets repaired.  Can anyone tell me how to fix this?
    Also, can anyone tell me why my disk permissions are constantly being changed?

    It's a recurring message. It's innocuous and of no concern. It is the result of the ARD installation you did. Just ignore it.

  • My iPhone screen went white when I did a screen shot. Now the screen will not go back.  How do I fix this?

    I have an iPhone 5 with 8.0 update.  I was taking a screen shot and my screen went totally white.  It will not go back to normal.  It is still white.  I can hear a text but can not see it.  What has gone wrong?  Does anyone know how to fix this?

    Hi Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo . You will not lose any data . Cheers  Brian

  • My iPhone4S does not charge, and will not upload photos. How do I fix that?

    I think that the charger/usb in the iPhone is burnt out. The charger works on other phones, and I tried 3 different chargers and none of them worked. So, I think it's actually the phone. Is there a way to fix this? Clean it? Replace parts?
    Or, there may be a battery problem. Recently I will have days when the battery depletes rapidly. That only happens occationally. Today, the battery did deplete quickley. Initially when I plugged the phone in it started charging & got to 60%, then I unplugged it to make a phone call. Then when I plugged it back in it would charge, then not charge, then charge ... back & forth until it stopped charging all together.
    I decided to upload my Christmas photos incase I have to restart it & that didn't work either. Unfortunately my Apple Support expired on 12/21/2012.
    Help. Any ideas?

    If your iCloud events are showing the incorrect time, check the following:
    Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you.  Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
    On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off.

  • My iphone4 wont show its charging and will not turn on

    my iphone was working great no problems it had a 50% charge i fell asleep when i woke up it would not turn on so i plugged it into the charger and it will not even show the charging bar on front screen what could be the problem?

    If reset does not work try to force into Recovery mode and restore device.....
    Connect to itunes
    Hold down home and power button until you see iitunes icon with arrow and usb on your phone.
    You will get a pop up in itunes that it has detected a phone in recovery mode you must restore.

  • My iphone 3gs turns off by itself and will not turn back on. Even it have full battery backup

    How can I turn it on help me

    I just did that to mine and it worked!!! Thanks chrisu91

  • All my songs got deleted off ipod touch 4g and are not syncing back. How do I fix this?

    READ THE WHOLE THING. I went to download a Taylor Swift CD to my ipod. I imported it like usual then hit sync. It didnt work. I tried importing it again and syncing it didnt work. So in the top menu where it says music, summary, ipod etc, I clicked on music. The box where it said sync songs was not checked so I checked it a pop up came up so I hit ok. Needless to say all my songs EXCEPT the Taylor Swift ones are not on my ipod! I have tried everthing to get the songs back.  The funny thing is when I go to library all my songs are in it but when I g to songs it only says there 16... Please reply to this question... I wont my songs back...

    See if this previous discussion helps.
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities

  • Iphone 4s shuts off around 56% and can't turn back on for a few min.

    I have the unusual battery drain since the update to 7.0.4 now I also have it shutting off near 56% and will not come back on for a few min and when it decides to the apple logo appears and the batt. is on about 44% then. any ideas on what is wrong with this phone".Thanks in advance' any and all help will be great.

    Hi jennifer cash,
    Thanks for using Apple Support Communities.  If your iPhone is powering off unexpectedly, I would recommend a section of this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Cheers,
    - Ari

  • Droid 2 Global Shut down and will not turn back on

    My D2G shut down earlier today and will not turn back on. I was listening to music and it shut down in the middle of playing.  If i plug it into a charger at first it does nothing (the charging light doesn't even come on), then after a while the backlight will come on, but nothing else happens. I have tried removing the battery. I've tried charging the phone for a few hours (in case the battery was dead) and still it will not power on.  I don't even see the "M" logo screen when i try to power on.
    Anybody have any ideas?

    That's very upsetting when the device will not power on. It maybe hardware related so we may need to look at your replacement options. Is there any corrosion where the battery and device connect? Please try the alternative hard reset This will factory reset the device. Please make sure contacts are backed up prior to resetting. If you are still experiencing this issue please PM me and I will gladly further troubleshoot with you.
    Thank you

Maybe you are looking for

  • Missing sync on one computer

    I have several computers and mobile devices set to sync via iCloud for contacts and calendars. One computer will send new updates, but not receive new updates to the contacts. Everything else seems to work properly. So, people whom I add to my contac

  • What minimum Support Package level is needed in BW 3.5 / 640 to be able to

    Hello Experts, A quick question: what minimum Support Package level is needed in BW 3.5 / 640 to be able to run the SAPGUI 7.10 (including BW add-ons)? I am also searching at my end. <removed_by_moderator> Read the "Rules of Engagement" Best Regards

  • When export mode is full and userid is system, data loss happens.

    Hi! I'm running Oracle 7.3.4 On HP-UX. I have problem when I try to export full my DB. I make a php program(a kind of ticket management program) and it use WEBDB's data in Oracle. Now, I export my WEBDB's data through userid="WEBDB" and the result of

  • Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

    After upgrade to OS Mavericks all-in-one HP C4680 does print and scan however scans are not properly saved. Saved file in preview shows grey bands; text is not readable. Driver update from HP support didn't resolve the issue, nor any workaround sugge

  • OCIStmtExecute 10g. vs. 11g

    Hi, Guys, I'm looking into problem related to missing rows after insertion performed simultaneously from multiple sessions. This problem shows up in 11g version only while for 10g everything works fine. As far as I know program compiled with 10g libr