My iPhone4 struck while making call i cant see any icons??

I had updated my phone to 4.3.5 after that,some times  My phone is going un responsive while making calls and taking calls. Please let me know the solution

Did you try to reset the phone by holding the sleep and home button until the Apple logo comes back again? You will not lose any data doing a reset.

Similar Messages

  • 1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

    Hi. please solve my problem.
    .call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
    thank you in advance.

    Hi Ersin,
    Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform.  However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module.  I can think of no reason why the different calling method would be a factor.
    When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
    Regards,
    Nick

  • While making call I am not audible to other end

    While making call if I am using loudspeaker mode, I am not audible to other end

    Hi Vinzgenius,
    From you are describing, it sounds like an issue with the microphone. Take a look at the article below to troubleshoot the issue further. Check to make sure that you do not have any Bluetooth devices connected as well as restarting your iPhone.
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    http://support.apple.com/en-us/HT203792
    Hope this helps,
    -Norm G. 

  • After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.

    After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.

    Try rebooting the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo. It should take about 10-15 seconds to reboot.

  • My phone turns off while making calls

    my handset turns off while making calls, this happens quite often in a day, i restored the phone to factory setting, still didnt help...

    I've got the same issue. Really annoying. I was hoping ios5 was going to fix it, but it didn't .
    I would be really interested to hear if someone has found the cause of the problem

  • Hey I would like to get app to block unwanted calls but cant find. any advise

    hey I would like to get app to block unwanted calls but cant find. any advise

    Yup, dito to ckuan's response - Contact your carrier or assign a silent ringtone/message tone to the contact so you will not be alerted at all to the calls/messages.

  • TS3672 How come i cant see any of my messages nor send any from my iphone 4?

    How come i cant see any of my messages nor send any from my iphone 4?

    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all filesystem issues, if any, and making sure that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
    1. Quit Mail if it’s running.
    2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is stored.
    3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
    4. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

  • HT4623 How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the prchaser?

    How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy  due to legal privacy laws.

    Then you should read these.
    http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
    http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
    This was strange but has to do with how startup disk and nvram interact
    http://forums.macrumors.com/showthread.php?t=1795765
    I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
    I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
    I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
    Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together.  Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
    The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
    One thing I found last week and meant to mention:  After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

  • I cant see any thing any SAP MMC for my XI server.

    Hi All,
    I cant see any thing any SAP MMC for my XI server.
    I checked the services SAPXID_00 and SAPXID_01, those sevices were not running. when i try to start the service I am getting error 1067: The process terminated unexpectedly. I have uninstalled and reinstalled the service with sapstartsrv.exe but no luck.
    I have also check SAP Note 82751
    when i checked the log sapstartsrv.log, I saw this error
    MSETCLXIDEV\xidadm is starting SAP System at 2011/01/17 16:16:47
    SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 212]
    SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
    Error: 13, Open Logging-File "sapstart.log". EACCES*: Permission denied OR: The data is invalid. 
    Please help to resolve this issue.
    Thanks
    Rehan
    Edited by: Rehan  Manzoor on Jan 19, 2011 12:39 PM

    Hi,
    Is it that there is no entry in SAP MMC for the system? Can you try to manually add the System in SAP MMC and check?I or is it that the system is already added and there is no info in SAP MMC. It is possible that the MMC is not working properly. You can reinstall the SAP MMC or better install the latest one. If the SAP MMC is not the issue here then it is possible that tthere is a some permission issue involved here.Could you check the whether the user with which the services are being started have correct permissions or not.
    I had an issue where my SAP MMC was installed in a windows system and my SAP system was in Linux(Redhat). And because of the firewall and a security feature called SElinux my SAP MMC was not showing any information.There was a similar issue where i had to upgrade the LM tools. You can download the latest Lifecycle management software from SMP.
    Regards,
    Jyotish

  • I purchased a mac book air today. When in store I was able to see all of my music in itunes. Now I am at home I cant see any of my music although i tunes is authorized on the computer. How do I fix this ?

    I purchased a mac book air today. When in store I was able to see all of my music in itunes. Now I am at home I cant see any of my music although i tunes is authorized on the computer. How do I fix this ?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • My caps lock is not working! (Nothing happens when I press it and I cant see any light turing on or off)

    Hey guys,
    My Caps lock doesnt work, I cant see any green light... I have a NEXXTECH 2.4G Wirrless Mouse and Keybored Combo Set
    I have bought it 2 weeks ago and I just noticed that my mac's keybored caas lock doesnt work. I think my keybored settings are bit mixed up so I tried to search on google about "How to reset the keybored's settings" (like a factory rest but only the keybored settings NOT the computer.) Please I dont know what to do, any help and tips will be really appreciated.
    ( I have a MacBook Pro Mid 2012 with 10.8.2 )

    Sounds like a hardware failure of the button.  Since you're most likley out of warranty, Google for a phone repair shop near you.

  • I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

    I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

    Your only option at this point is to connect the device to a computer running iTunes so you can restore it.
    B-rock

  • I cant see any thing on my screen

    i cant see any thing on my screen

    Charge the iPod battery for at least 2 hours, there  wont be any sign of life for the first 30 minutes of charging, so be patient, then the screen will display a charging sign and "do not disconnect" sign.
    After charging till full charge, preferably 4 hours
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Good Luck!

  • I am unable to delete my photos which are synced through computer..i have upgraded to ios 7 and im using iphone 5...i tried doing it by using itunes but i cant see any photos at all...help requested

    I am unable to delete my photos which are synced through computer..i have upgraded to ios 7 and im using iphone 5...i tried doing it by using itunes but i cant see any photos at all...help requested

    If you didn't already do so, try uninstalling iTunes and all of it's components (not just iTunes and AMDS), then reinstall iTunes, as discussed here: http://support.apple.com/kb/HT1925.  Follow the article and uninstall them in the order indicated.

  • GOT AN EMAC G4 BUT CANT SEE ANY PICTURES AND HEAR ONLY GRUMBLING SOUNDS WHEN I PUT IT IN MODERN MOVIES ON QUICKTIME FORMAT VIA FLASH DRIVE, ANY IDEA?

    GOT AN EMAC G4 BUT CANT SEE ANY PICTURES AND HEAR ONLY GRUMBLING SOUNDS WHEN I PUT IT IN MODERN MOVIES ON QUICKTIME FORMAT VIA FLASH DRIVE, ANY IDEA?

    Might be some help here for you.   http://guides.macrumors.com/Watch_AVI_Movies_in_Mac_OS_X

Maybe you are looking for