My iphone4 was connected to our bmw5 but was deleted from Bluetooth, now it will not reconect as a new device " connection failed" what should I do?

iPhone will not reconnect to bmw5 after being accidentally deleted from bluetooth - will not connect  any ideas?

Hi mgwilliamstown,
Thanks for using Apple Support Communities.  This article has some information on troubleshooting car stereo connections, including Bluetooth:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Cheers,
- Ari

Similar Messages

  • My MBP was runnning unbelievable slow, I need to re-install fresh Lion, but when I upgraded to Lion, I did not got the disc or thumb drive. What should I do?

    My MBP was runnning unbelievable slow, I need to re-install fresh Lion, but when I upgraded to Lion, I did not got the disc or thumb drive. What should I do?R

    Instead, you could restart holding the Command and R keys, which will start up on the Recovery partition Lion creates, and then restore the operting system on the main partition.
    Before doing anything like erasing the startup drivek maie sure you have an external drive with a backup copy incase things go badly.

  • HT5624 My server connection failed what should I do

    My server connection failed what should I do

    Hi mgwilliamstown,
    Thanks for using Apple Support Communities.  This article has some information on troubleshooting car stereo connections, including Bluetooth:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Cheers,
    - Ari

  • HI,had a problem with my iphone4,phone was reset@ Apple store now it will not sync with my itunes.Anyone know what i need to do please

    Hi,had a problem with my iphone4, phone was reset at the Apple store BUT now it is not being recognised by my computer. Itunes is up to date & i have tried my usb with my ipod & everything is ok.Any idea what to do next please??

    iOS: Device not recognized in iTunes for Windows

  • I deleted and reinstalled HP Solution Center. It was working great and now it will not open.

    HP Photosmart C8180. HP Solution Center
    Windows Vista 64 bit
    HP Solution Center will NOT OPEN
    HP Photosmart Essential does open and works fine
    I deleted and reinstalled from website Full Version of software to change from USB to Wireless connection,
    Solution Center worked great using USB before this change.
    Printer will print from MS Office and Web, but cannot open Solution Center to select Scan settings etc.

    Hi there,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My mac air was working just fine , now it will not find my HP office jet pro 8500

    Mac Air was working perfectly with my HP Officejet 8500 pro... now will not find it ??

    Hey nondeplume,
    I'd check out the following article and see if that helps resolve the connection issues you're experiencing on your MacBook Pro:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Hope that helps,
    David

  • I was trying to update my ipad mini from 7.0.4 to 7.1.1. after updating it went for restarting and from then its showing only the apple logo but nothing else. i can't restart my ipad. i tried to restore from my back up. its not working.......what should i

    help me out

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • My wifes iphone 4 is disabled and askes for pass code but we dont remember it now it will not open

    it askes me for a pass code to connect to itunes but i do not have how can i hard reset my wifes iphone 4

    http://support.apple.com/kb/HT1212

  • Application which was removed from MacBook Pro Dock will not open. Why?

    I dragged the Photoshop Elements (PSE) 11 Editor icon from the Dock on my MacBook Pro (Mavericks) because I had recently installed PSE 13. I still wanted to keep the version 11 Editor but not in the Dock. It dissolved in a puff of smoke as expected.  When I went to Launchpad and the Applications folder in the Dock, PSE 11 Editor would not open.  There was a question mark over PSE 11 Editor icon in Launchpad. The error message was that there were parts missing and I should reinstall it. When I go to Finder > Applications and click on PSE 11, where the icon used to be is a blank icon. It is named "Alias." When I click on the icon, the error message is "The operation can't be completed because the original item for "Adobe Photoshop Element 11" can't be found."  I then when back to Launchpad and opened the PSE 11 Organizer icon. After it opened it, I opened the PSE 11 Editor from the Organizer.  The Editor was fine and was functional. I then saved it to the Dock. I went back to Finder and the PSE 11 Editor is still not available.  What the heck is going on???  I would like to be able to remove Apps from the Dock and still be able to open them from Launchpad or the Applications Folder.  HELP!
    Thanks, Bob

    "The PSE 11 Editor I restored to the Dock from PSE 11 Organizer today works also."
    Yes, sometimes that's all it takes. It's usually a matter of finding the original application nor the alias.
    I'm still suspicious of Adobe since they seem to be going the way of Microsoft. If you muck about w/ the folders the application often stops working:
    "___  __ cannot open because elements are missing from the application folder".

  • I have upgraded to the new Firefox but removed it because my DAP premium will not work with the new version. Am I doing something wrong?

    DAP Premium seems not to be compatible with the new version

    Dear Old Bob..I enjoyed that! I and thanks so much ...I would have done it if I could have done it but I was blocked by Photoshop at every stage! Thankfully my own IT Guru and friend came to the rescue remotely last night and has down-loaded it. But it took him quite a bit of time.
    As XP is  faded out, there will be an awful lot of people like me complaining.
    But truth is my problems are only at a start! About 30 prints (some not yet on my 'blog' (juliamatcham.wordpress.com) all have varying settings which I have noted. Everything depends on these settings.
    All are Apple RGB (although my computer is a PC) and they were all set for my printer Epson Photo 1800. Also they were set at varying settings...Standard or Vivid 1.5, 2.5 whatever suited the design.
    These settings appear not to exist on CS2 which is a nightmare for me as each print was carefully proofed with a great deal patience and at some expense as in the end one has to use expensive paper even for proofing.
    If you have any hints for how to translate these old settings...I would kiss your feet!
    Just looking through how things work, I can't understand why I can't change my first printing option to landscape ...everything esle so far seems comprehensible.
    I do hate change!
    Meanwhile, thanks so much to Curt, Noel, Nahraka and Old Bob for cheering me on. I am obviously going to be back asking more questions about CS2!
    Julia

  • HT1212 Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

    Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • My ipod wasnt loading facebook so i deleted it and re downloaded it and it frose. SO i rebooted it and it got stuck on the apple part of turning on. I tried to plug it in my computer but it wont connect. What should i DO?

    I was on my ipod and my facebook wouldnt load so i deleted it and was redownloading it and it froze. I turned off my ipod and tried to turn it back on. In the process of turing it on it froze with the apple screen and now wont turn back on. I plugged it into the computer but it wont connect. What should i do?

    Hold the home button and sleep button down together for 16 second when device is on. This will reset it in DPU mode which completely shuts of device. Once it has loaded it should be fixed

  • I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    What happens when the iPod is plugged in?  anything?  any errors?
    Why is 50GB of music gone?  All music should exist on the computer.  Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

    please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this  should unlock with key and I should do for Please help!. thanks

    Place the iPOd in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

Maybe you are looking for

  • HAL 9.3.1 Essbaes Adapter Error

    We recently migrated from Planning 3.5.1 to 9.3.1 and are still using HAL. In several of our Integrations we were able to pull in the new adapters (Planning 9.2 and Essbase 9.2 - we had to use this older Essbase adapter because the newest version was

  • A problem with dll

    i need labview to call a dll which i made by VB, and i am able to output numeric by using Call Library Function Node, but still have some problem when outputing a string, everytime labview crashes. Now i simplify my dll as follow public function add(

  • Can't Upgrade Bootcamp With Leopard Install Disc

    Hi Everyone, I just installed Leopard and wanted to upgrade my Bootcamp partition. However, when I start up in Windows and then try to install the new version, all it does is hang at Marvell Ethernet (which is the first driver to be installed). Now,

  • Sus usage

    Dear sap gurus, We are in srm 7 ehp 2 with ecc 6 ehp 5 and we're planning to use classic scenario with sus. In srm, we plan to use rfx as well. So my question is if we also use sus, does it mean that our cendor need to logon to srm system to respond

  • Where are my extensions?

    Running Dw CS4 on a mac (10.4.11) and I installed several extension from various creators using the extensions manager. Then I quit that and launched Dw. I created blank html page to insert and experiment with some of the new stuff and the extensions