My iphone4s does not lock the screen automatically when playing music and charging

My iphone4s (iso5.1) does not lock the screen automatically with the condition in charging and playing music.
System has been set to lock the screen in 1 mins.
Everything goes fine when not in charging, the system can lock well even playing music.
System can lock as well when all the music playing apps are closed, even when charging.
I don't think that's my apps' problem, all my music playing apps have the same problem.
My ipod has the exact same problem described above, I believe that's an iso system bug.

It's not something i'm familar with but i will forward it internally for investigation. Could you please send me a PM with the IMEI of your phone and the build number? You can find these under Settings -> About phone and Settings -> About phone -> Status.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

    touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    - Charge the iPod for half an hour.  Then reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
    - If still problem, place the iPod in recovery mode and then try to restore the iPod.  For recovery mod see:
    iPhone and iPod touch: Unable to update or restore

  • What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

    what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

    If the iPhone was unlocked unofficially, it has been locked to original carrier again.

  • I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    Did you remove Quicktime X?
    On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
    You will need to reinstall OS X to get Quicktime X back if you have deleted it.
    I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

  • The application does not use the  screen and run in the background

    Hi
    I have downloaded a package of j2me Midlet
    from [link] here [link]
    and try to reuse the code
    but I get the following error when running the code:-
    The application does not use the screen and run in the background
    I think the error into one of these two classes
    package main;
    import javax.microedition.midlet.*;
    import javax.microedition.midlet.*;
    import javax.microedition.lcdui.*;
    import javax.microedition.media.Manager;
    import javax.microedition.media.MediaException;
    import javax.microedition.media.Player;
    import java.io.IOException;
    import java.io.InputStream;
    public class MainMidlet extends MIDlet implements CommandListener {
        private SSGameCanvas gameCanvas ;
        private Command exitCommand ;
        private Player player = null;
        public void startApp() {
      try {
           //   create new game thread
              gameCanvas = new SSGameCanvas();
              gameCanvas.start(); // start game thread
              exitCommand = new Command("Exit",Command.EXIT,1);
              gameCanvas.addCommand(exitCommand);
              gameCanvas.setCommandListener(this);
                Display.getDisplay(this).setCurrent(gameCanvas);
       catch (java.io.IOException e)
                e.printStackTrace();
            try {
                // start sounds
                InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
                player = Manager.createPlayer(in,"audio/x-wav");
                player.setLoopCount(1);
                player.start();
            catch (MediaException ex)
                ex.printStackTrace();
             catch (IOException ex)
                ex.printStackTrace();
        public void pauseApp() {
        public void destroyApp(boolean unconditional) {
            if (player != null) {
                player.close();
            System.gc();
      public void commandAction(Command command, Displayable displayable) {
           if (command == exitCommand)
                 destroyApp(true);
                 notifyDestroyed();
    package main;
    import java.io.IOException;
    import javax.microedition.lcdui.*;
    import javax.microedition.lcdui.game.*;
    public class SSGameCanvas extends GameCanvas implements Runnable {
        protected GameManager gameManager;
        protected boolean running;
        private int tick=0;
        private static int WIDTH;
        private static int HEIGHT;
        private int mDelay = 20;
        Form mainForm;
        Display display;
        //private int MaxTime;
        public SSGameCanvas() throws IOException{
            super(true);
            gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
        public void start() {
                this.running = true;
                Thread t = new Thread(this);
                t.start();
        public void stop() {
            running = false;
        public void render(Graphics g) {
            WIDTH = getWidth();
            HEIGHT = getHeight();
            // Clear the Canvas.
            g.setColor(0, 0, 50);
            g.fillRect(0,0,WIDTH-1,HEIGHT-1);
            // draw border
            g.setColor(200,0,0);
            g.drawRect(0,0,WIDTH-1,HEIGHT-1);
            // draw game canvas
            gameManager.paint(g);
        public void run() {
            while (running) {
                // draw graphics
                render(getGraphics());
                // advance to next graphics
                advance(tick++);
                // display
                flushGraphics();
                try { Thread.sleep(mDelay); }
                catch (InterruptedException ie) {}
        public void advance(int ticks) {
            // advance to next game canvas
            gameManager.advance(ticks);
            this.paint(getGraphics());
    }Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

    Hi Andi,
    Thanks for your reply.
    Yes, I have waited for a while and the result doesn't change.
    The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
    Can you please suggest anything.
    Thanks and regards
    Nagaraj

  • Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

    I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
    Theo Smith

    I sent the screenshot via an e-mail attachment. I wasn't aware  that
    attachments could not be forwarded this way. I will send it again. First  time
    I've utilized this service.
    In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time, 
    [email protected] writes:
    Dvd  burned in premiere pro cc does not fill the screen. Desire a 4:3
    aspect  ratio
    created by Peru Bob (https://forums.adobe.com/people/Peru+Bob)  in Adobe 
    Media Encoder (AME) - View the full  discussion
    (https://forums.adobe.com/message/7264779#7264779)

  • Upgrade to Windows 10 by using my notebook as a tablet does not turn the screen

    I realized that after doing my upgrade to Windows 10 by using my notebook as a tablet does not turn the screen  (al realizar mi actualizacion a windows 10 mi laptop ya no gira la pantalla en modo tableta... y es 360 grados.. como lo resuelvo??? gracias!!!

    i have the same problem with my envy x2 13 j002dx. tried reinstalling drivers and windows 10. the auto rotate button is there but doesnt do anything when i toggle it

  • Hi, I have a problem with my ipod 5,does not turn the screen, and it is talking a lot, what can I do?

    Hi, I Have problem with my ipod 5, what can I do?
    It is talking and does not turn the screen with my finger!

    sounds like a hardware failure.  Return the phone to Apple.

  • My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • HT4623 My iphone4 does not show the "software update" choice under General so how can I update to a later version of iOS?

    My iphone4 does not show the "software update" choice under General so how do I update my iOS?

    You can alternatively connect your iPhone to iTunes on your PC and upgrade your iOS from there.

  • Screen Saver does not use selected Screen Saver when activated

    Screen Saver does not use selected Screen Saver when activated. After "Start screen saver" elapse time has been reached, a blank black full screen is displayed. I can activate the selected screen saver by using the hot corners function. Any help with this matter will be greatfully received.

    Hi again sassey,
    You're assuming correctly. Simply change the settings so that your screen saver activates before the sleep settings.
    Hope this solves your problem...

  • Windows control panel routine to designate Elements 12 as my default editor does not list the program. It loaded OK and accepted the key. Your regular help line could not help. What to do?

    Windows control panel routine to designate Elements 12 as my default editor does not list the program. It loaded OK and accepted the key. Your regular help line could not help. What to do?

    Hi Robbie,
    The editor program is NOT under the organizer path as you mentioned in your last message. The actual editor program is at the location I gave in message #1 i.e. as follows
    "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    The one under the organizer is actually the Welcome screen which you have probably set up to go directly to the editor.
    If you go to the Open With screen I showed in message #3 and browse to the actual editor as given above, it should show up in your list.
    If it doesn't, then Windows is playing up again - and we have to take extra steps.
    Brian

  • When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

    When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
    I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
            Mockery context = new Mockery();
            final MessageListener messageListener = context.mock(MessageListener.class);
            final Latch latch = new LatchImpl();
            final String prefix = "test" + System.currentTimeMillis();
            context.checking(new Expectations() {
                    oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                    will(new CustomAction("release latch") {
                        @Override
                        public Object invoke(Invocation invocation) throws Throwable {
                            latch.unlatch();
                            return null;
            final Connection connection = createConnection(null, null);
            Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
            connection.start();
            Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
            Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
            final MessageConsumer consumer = session.createConsumer(wildcardTopic);
            consumer.setMessageListener(messageListener);
            MessageProducer producer = session.createProducer(null);
            producer.send(destination, session.createTextMessage("MSG1"));
            latch.await(5000);
            connection.close();
            Thread.sleep(5);
            context.assertIsSatisfied();

    Check where your MDB sends the [response] messages to.

  • I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

Maybe you are looking for