My iphone4s keeps rebooting every 3 minutes; what might be wrong

My iphone 4s keeps rebooting every 3 minutes; what might be wrong

Welcome to the Apple Community.
Check that the HDMI cable is seated correctly at each end and try another cable if the problem persists.

Similar Messages

  • While charging my new 9320 it keeps rebooting every few minutes

    I upgraded to a BB Curve 9320.  Today it is charging for the first time, but while charging it keeps rebooting, not continually but every few minutes.  I already connected it to my computer which has Windows 7, to the Blackberry software and synced it with Contacts etc, but it is still rebooting.  Anyone know what's wrong?

    Hi and Welcome to the Community!
    So, it only does this while charging, and only while charging on the wall charger? What about just charging to the PC? Or to a car charger? What about different wall/car chargers than those you already have?
    In any event it is possible that your battery may be defective...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My MBA keeps shutting off every 5 minutes. what is happening? I can't do any work done because of it. :(

    My MBA keeps shutting off every 5 minutes. what is happening? I can't do any work done because of it.

    Same problem for me, it happened after 3 weeks.
    I had to call Apple, althrough they couldn't solve the problem by phone.
    Genius bar were full so they sent me to a local store.
    Looks like it has something to do with the graphic card. It occured when I plugged my macbook to my iMac for screen the 1st time
    11 days later I'm still waiting to get my macbook back. Hope you can get it faster!
    Very disapointed with the support quality and product quality.

  • Airport keep disconnecting every few minutes

    Hi,
    I don't know why, but my airport keeps disconnecting every few minutes, although it reconnects after that.
    I'm sure there's no problem with my router since other PCs in my home are fine.
    It's totally fine when I use my windows in the macbook (via bootcamp).
    Anyone has the same problem or anyone knows the solution?
    Thanks.

    I've had this issue for about a week and it has made my Macbook nearly impossible to use for anything other than local disk work.
    Last night I tried running the standalone upgrade and it worked beautifully, however, upon booting up this AM I'm back to square one, constantly dropping the connection, ran the standalone update again and back in business with no drops.
    While this is appears to be my temp workaround I don't want to be doing this on a daily basis.
    HELLO APPLE what is the deal ?

  • Z97 Gaming 5 + i7 4770k + Corsair rm750 keeps rebooting every 3 sec

    So this it, last night I've starting building the new PC.
    When I try to switch it on, it just keeps rebooting every 3 second.
    I can see the red audio boost and green leds switching on, the CPU fan just moving a bit.
    I can hear a loud "CLICK-CLACK" on the on/off (coming from the PSU)
    I don't hear any beep (case is an Obsidian 550d and I wonder if there's a speaker or something I should connect to hear beeps, or it's only an old thing)
    I tried both with and without RAM (Kingston hyperx ddr3 2400  2x8gb).
    Tried with one Dimm in slot2 too, and a few more combinations.
    Not using any HDD nor a GFX Card at the moment.
    Both JPWR1 and JPWR2 are correctly connected.
    JFP1 stuff should be correctly connected (at least the power button is).
    I'm basically desperade, because I don't know what else I should try.
    edit: it actually keeps restarting every 3 seconds not 1

    HOLD ON!
    Just checking the whole motherboard for bent pin as I read in another thread,
    I found out that maybe I have a bent pin into the USB3.0 connector, that I haven't connected yet.
    This is really the best pic I can provide sorry, but it might be visible on the left a missing pin ad one bent down (I think)
    https://www.dropbox.com/s/kvdq8pspck3bo4d/NewPCWip_usb3Pin.jpg
    It's way too small for me to even try something there.
    Could this be causing the problem?

  • IPad2 reboots every few minutes

    My iPad2 recently began to reboot every few minutes of use.  It has been reformatted, all added apps removed and the battery allowed to completely deplete then recharge, all to no avail.  Any suggestions?

    If you are near an Apple Store, a trip to the Genius Bar.  If you are still under warranty they can replace it.  If you are out of warranty, they may still be able to replace it for a fee but it will still be less than full retail cost.

  • WRT54G reboots every 20 minutes

    I recently just switched from astound to comcast and astound worked fine 100% uptime no d/cs or anything...When we switched to comcast the router reboots every 20 minutes. I called comcast and they said everything is fine on their end. I tried power cycling everything and still no luck. When i connect directly to the modem I get no d/cs. Anyone have any ideas? Thanks in advance for any possible help, and sorry for my prolly horrible grammar. =]
    Message Edited by Hukepi on 08-08-2007 10:31 PM

    hi... connect the computer directly to the modem, go to www.linksys.com/download and download the latest firmware for the router, connect modem >> router >> pc, logon to router's setup page, open I.E. and in the address bar type 192.168.1.1 it would ask for username and password...put "admin" (default password) as a password and try reflashing/upgrading firmware on the router, after reflashing firmware on the router reset it and reconfigure it according to ISP settings and try reducing MTU to 1365 on the router...check whether it makes any difference or not and let me know the results.

  • My software (2012 quick books) keeps crashing every 5 minutes

    my software (2012 quick books) keeps crashing every 5 minutes
    ihave the 2.7 intel core i5    OS X lion 10.7.4

    Restoring the iPad actually puts a "fresh" or "new" copy of the software (iOS) on your iPad; If you have restored the iPad in iTunes; You should have done "Setup as New iPad" not "Restore from Backup". The problem could actually exist in the backup itself.
     So if you did "Restore the iPad" from a backup; try setting up the iPad as "New iPad" and see if that makes any difference;
    hope it helps

  • Iphone keeps rebooting every 2 mins..help

    iphone keeps rebooting every 2 mins..help
    tried holding down on and home buttons ..not working

    See Here
    http://support.apple.com/kb/HT1808

  • My phone keeps restarting every 5 minutes. how do i make it stop

    my phone keeps restarting every 5 minutes. how do i make it stop

    Try to sync you phone with iTunes to create a new backup before it restarts.  Also try to import your photos (see http://support.apple.com/kb/HT4083) and back up your contacts if you can (sync them to iCloud in Settings>iCloud>Contacts>On or use an app like My Contact Backup).  When done, force you phone into recovery mode and restore it, as explained here: http://support.apple.com/kb/ht1808.

  • IPHONE 5 keeps restarting every 5 minutes

    Iphone 5 keeps restarting every 5 minutes. the screen turns black and then the apple logo shows up. does anyone know how to fix this?

    Hello jonah910,
    Thanks for using Apple Support Communities.
    I'm sorry to hear about the issue you're having with your iPhone, I definitely see how it is a frustrating experience!
    I'd like you to follow the troubleshooting in the following article to help resolve the issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Specifically the section under power & battery:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Take care,
    Alex H.

  • Fresh installation of 2012r2 on PowerEdge r620 rebooting every 10 minutes

    Installed 2012r2 Standard Evaluation on a Dell PowerEdge r620 today. In response to a failing 2003 DC. It's rebooting every 10 minutes or so with an lsass error.
    A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005.  The machine must now be restarted.
    I'm doubly concerned as in the process I raised the forest level from 2000 to 2003 (We still have 2 2003 DCs, one of them the struggling one) I've promoted it to DC and transferred the FSMO already. I've got the weekend to get it sorted...
    It's my first server install and I just did a straight bare metal install without installing Dell drivers. I'm thinking this may be my problem...
    Any advice greatly appreciated.
    Neil

    After reading so much about the irreversibility of raising the forest level once offline DCs have been added again I was cautious about adding the previously downed DR DC. However the FSMO roles and AD replication were struggling so, after some consideration,
    I brought the offending DC back online (AD has not been actively maintained for more than a couple of years...)
    Initial signs were good. Replication was happening. 
    However, my process involved replicating across to the new server data from more than one source (The org had suffered from server spread over the past few years). In the process of consolidating the DFSR namespaces and shares, and removing legacy FSR replication
    I hit problems with deleted namespaces and replication groups lingering and not being able to be deleted. I tried to follow various diagnostic and recovery methods. See this post. My main concerns continue there... :-
    Bah. Can't post link. Account not verified yet. Will edit in due course. Check my profile for the DFSR related thread...
    Not wishing to jinx it but the AD looks fairly stable now. Slight concern is repeated system log entries indicating :-
    The DFS Namespaces service has successfully initialized the shared folder that hosts the namespace root. Shared folder: *********
    Would be great to get rid of them.

  • After I did a software update on my iPhone 5,once i emanble LTE,it loses Service/Network.What might be wrong?

    Hi,I ran a Software Update on my iPhone 5,but now if I "Enable LTE" it will display No Service and no network at all.What might be wrong here?

    It's completely situational. Without being able to directly compare the "scratch" on the original poster's iPhone with your iPhone, what gaamcc had happen could not be extrapolated to guess what Apple may do in your situation. It will depend entirely on what the Apple technician diagnoses after examining your iPhone. He/she may decide that any damage is strictly cosmetic and didn't have any connection with the problem you're taking your iPhone in for, or he/she may diagnose the problem as stemming from user damage. You'll just have to see when you go to the Apple Store.
    Regards.

  • I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • I am unable to turn my ipod on.  Suggestions for what might be wrong?

    I have my iPod plugged in to charge.  But it won't power on.  Suggestions for what might be wrong?

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

Maybe you are looking for

  • CPU Throttling New GT70 2PC GTX 870

    Hello friends. I noticed something odd on my new laptop. I have encountered a few of the issues that others have mentioned with regards to wireless and believe I have mostly resolved that but have since started to notice performance issues that corre

  • Set black to be transparent in Quicktime Pro

    Hi everyone. I exported a Keynote presentation from Keynote and would like to set the black background of the movie to be transparent. Is there a way to do this?

  • How to display recordnumber for each row in cross tab?

    <p>Hi.. </p><p>I am using Crystal Report XI,with the database Microsoft SQL Server. I have 2 questions regarding Cross Tab.</p><p>1. How to limiting record per row and per column in Cross Tab? For example,at one page the report printing 20 records pe

  • Opening Browser in BDT View

    Hi, is it possible to open a Browser in an BDT View or open an browser window after pushing a button on the BDT? Thank you Stefan

  • Number of counts ?

    Hi Could you please let me know how to capture , number of counts , Number of Lines ..this type of keyfigure in Report ? Regards