My iphone4S over heats when playing Asphalt7 .Is it normal?

Hi Everyone ,
I have downloaded Asphalt 7 game which is car racing game in my iphone4s and when i started using it ,I felt heat on my finger from my Iphone4S.
I do know that the game uses lot of battery power for performing graphical and other gaming function in processor.But is it normal that iphone over heats while playing .
Have any one experienced the same?
Thanks
Hemashekar

Can we assume you use a laptop and not the silver tower to black cylinder type Mac Pro desktop computer?
Laptops always run hot and hotter.
While usually "less is more" and a good idea to not go installing extra utilities that run in the background and such, it is a good idea to monitor a system and its thermal sensors.
Hardware Monitor was great but does not work on the Mac Pro Late 2013 6,1 models (current) but does on older models, and iStatPro is a good alternative and popular.
Having actual numbers can be more helpful than "it gets hot" to know how hot, and also what is normal as well as for the fans and base rate and during gaming.
Some people of course use computers more specially geared toward gaming and geared to higher performance, higher tolerance for heat, and cpu and graphic card(s) to meet the needs of games - with more fans, more air flow, or even water cooled. On the Mac Pro noise and quiet were chosen as priorities. Also the cpu and gpu on the 6,1 are designed to throttle and shift work loads and not to run both cpu and gpu at their maximum performance levels which would limit games and fps. (Some of course install Windows where GPUs are used to better advantage).

Similar Messages

My iphone 4s Getting Over Heating While Playing Motion Games

I bought iphone 4s 3 weeks ago, It's getting over heating over heating on right side of silver coating while playing motion games or using wifi. Its normal or what can i do. Please help help me......................................,

does it get hot when you dont play the game? If it deosnt then there probable nothing wrong

REG:My new iphone 4s getting over heat while playing and charging

Hello,
I bought new iphone 4s on Last month,I'm facing over heat problem,while palying games in iphone and in charging my iphone.i'm getting this problem randomly

This may answer your question: http://www.phonesreview.co.uk/2011/10/22/iphone-4s-battery-overheating-fix-or-fo rget-iphone-5/
Or this: http://appletoolbox.com/2011/12/iphone-4s-overheating-issue/

My mac over heats when i play games on it why is this

i play games like minecraft and portal on my mac and after 5 mins of use the fan turns on and is louder then the speakers is this normal for the mac to do this or is there something wrong

Can we assume you use a laptop and not the silver tower to black cylinder type Mac Pro desktop computer?
Laptops always run hot and hotter.
While usually "less is more" and a good idea to not go installing extra utilities that run in the background and such, it is a good idea to monitor a system and its thermal sensors.
Hardware Monitor was great but does not work on the Mac Pro Late 2013 6,1 models (current) but does on older models, and iStatPro is a good alternative and popular.
Having actual numbers can be more helpful than "it gets hot" to know how hot, and also what is normal as well as for the fans and base rate and during gaming.
Some people of course use computers more specially geared toward gaming and geared to higher performance, higher tolerance for heat, and cpu and graphic card(s) to meet the needs of games - with more fans, more air flow, or even water cooled. On the Mac Pro noise and quiet were chosen as priorities. Also the cpu and gpu on the 6,1 are designed to throttle and shift work loads and not to run both cpu and gpu at their maximum performance levels which would limit games and fps. (Some of course install Windows where GPUs are used to better advantage).

GPU over heating when mac is idling...

I have a late 2006 imac with isight so its quite old. My issue is that GPU really overheats, everything else is in normal range but it get to about 68C when Ijust have safari open or skyping which doesnt seem graphic intensive. I do have a 2nd display plugged in (as its screen has those coloured vertical lines and Im not paying for the screen to be replaced) which would make the GPU a bit hotter but nothing like this!
When I used photoshop, the GPU went up to about 74C which is far to hot for my liking, everything else was around 40C.
I really need this computer to last me 3 years whilest Im at uni and I will be needing to use photoshop.
I have downloaded SMC fan control but Im not sure which fan would be the best to ramp up....(plus I know these old imacs are nortouious for overheating)

Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

HT1476 iphone battery over heats while using apps

Hello,
my iphone battery over heats when charging and using apps. It is so hot to the touch that it feels like it will burn me.
anyone know a solution to this problem.
Thanks,
John Nguyen

Yes let the phone charge and don't use it.
you can live without the phone while it charges...

No sound when playing burned DVD with Windows Media Player

Hello!
I made a 10 minute movie which I burned , tested and delivered today.
But it turns out that when playing the DVD with WMP, there is no sound.
I had tested the movie playing it with powerDVD, and it worked as it should. When playing it with a normal DVD player and TV it works allright.
But I had not tested it with WMP. And sure enough, when playing it with WMP there is no sound!
The ones who will show the DVD will do it from a computer to a video projector, and maybe they don't have a "proper" DVD program installed. But I heard that there was sound when playing with "VLC" which is a relief.
But I feel the need to get to the bottom of why there is no sound with WMP? Any clues?

In NTSC-land, one has but two choices: PCM/WAV or DD AC3, which is a particular "flavor" of MPEG. In PAL-land, one does have the option of MPEG (not DD AC3) as an option, but that seems to be falling out of favor.
When MS was re-tooling WMP, they wanted to add back the functionality of commercial (pressed/replicated) DVD's, but sought to limit any burned DVD's. Do not know what the mindset is now, so much could have changed with a few iterations of WMP. I have to admit that I just do not reach for it that often.
In the Project, or Disc, menus, one can tell En which Audio Transcoding to use. As John T, suggests, I would definitely do a test with PCM/WAV, and X my fingers.
If your client(s) is/are set on WMP as the player, there is hopefully a scheme that you can get to work. Also, remember that some older versions of WMP might not play the DVD at all, unless one finds the right plug-in, that basically hacked the intended setup in those older versions. Just like when delivering to a client, and not knowing their systems' calibration, or setup, trying to cover every base in a particular player software might involve a lot of work, and prayer.
Good luck,
Hunt

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

HT3939 Hi there I've got an iPhone 5 starting to get electric shocks of fone when I leave it on charge! Can you help me in this matter! Fone is constantly over heating the shock I got off phone really hurt! So please can u get intouch on

Hi there I've got an iPhone 5 starting to get electric shocks of fone when I leave it on charge! Can you help me in this matter! Fone is constantly over heating the shock I got off phone really hurt! So please can u get intouch on
<Edited By Host>

This is a user forum and is not Apple. I would definitely recommend that you stop using your iPhone and take it to be checked.

When playing any audio the audio quality on my Thunderbolt display steadily worsens over an hour period and becomes garbled. Restarting the media player fixes it. Does not occur when MacBook Pro is undocked.

When playing audio/video on my MacBook Pro docked to Thunderbolt display the audio quality steadily worsens until it is garbled beyond understanding. I don't know if it occurs when using the MacBook undocked. It takes about an hour to become noticeable and steadily worsens. Simultaneously when the computer speaks the time this is also gargled. As the problem develops it sounds like there is a static halo around each spoken word.

Hi GeoChester,
Welcome to the Apple Support Communities!
I understand that you are experiencing some sound issues on your Mac that worsens over time. In this situation, the first troubleshooting step that I would recommend would be to reset your computer’s PRAM. To do this, please follow the instructions in the following attached article.
OS X Yosemite: Reset your computer’s PRAM
Best regards,
Joe

Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!

Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

Hey Hype.Beast.187,
Here are some troubleshooting steps for not being able to hear sound through your iPhone speakers. I'd pay special attention to steps 8, 9, and 10 in your situation:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
All the best,
David

Verizon for one you have very bad customer service, for two why does someone who has a one year warranty have to go into the store to replace my samsung galaxy s4 phone, when all it has done for months is over heat?

I dont understand why i would need to go into the store for a replacement phone when i have had my phone under one year just because i have had it under one year. My phone has been over heating and i been trying to get a replacement phone, but i dont really have time to go in the store and i really dont see why i can replace my phone over the phone after one year.
oh and your customer service sucks.
Thank you

Broke new phone Verizon couldn't help even give me form for insurance I pay for in their stores.Seperate corp.Had no Internet waited 2 weeks mail me form.They suck.Did run across 1 dude finially knew his stuff and personally handeled many problems.It was after most working there didn't took me month replacement phone mailed.If customers service person seems new ask for someone can fix problems asap.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

AVI Video 'studdering' when played over local wireless network

Here's the setup...
.AVI movie resides on an external USB drive connected to a white Intel iMac which connects wirelessly to Linksys hub (WRT54G). I then try watching the video on an IBM Thinkpad with Windows Media Player v12. The Thinkpad connects wirelessly to the Linksys hub.
When playing the video, every 7 min or so, it will start to studder for lack of a better way of describing it. I thought it was the anti-virus software on the Thinkpad, which I uninstalled and it didn't really help.
There are no other machines connect to the linksys hub.
This is a bit obscure, but it's driving me nuts!!! Any suggestions?

Hi Stephen,
You could try your Energy Saver preferences pane on the iMac. If it is set put hard discs to sleep when possible, it may be getting in the way if your iMac is not doing anything else.
Karn.

Problem with MSI Nvidia GeForce 6800 LE (128MB) when playing 3D games

Games problem
I have bought a new MSI Nvidia GeForce 6800 LE (128MB) a couple of months ago and have been have loads of trouble when playing games.
In windows, the graphics card works fine. The computer never crashes and everything is speedy. Movies on DVD, Xvid, Divx all play fine without problem, the most I get is the occasional freezing and then windows will be normal again.
The problem arises when I try to play a 3D game. When I load up the game it goes into the menu screens ok, the computer will load up the 3D engine and it will play for around a minute nice and crisp then the screen will go blank and computer will lock up. Then all the drives will go quiet and the computer will make 3 beeps with the PC speaker. Pressing CTRL+ALT+DEL at this point does nothing, nor does the reset button. I have to turn the power on and off.
I really have no clue why this is happening, I have taken the covers off and kept it in a cool area, hoping that it was something to do with over heating, my computer is not overly cluttered and this has made no difference.
I have also unplugged the CDR, DVDR, USB ports, one Hard drive (storage) to see if it was something to do with the power no getting to the Videocard and then tried to play a game and the same problem arose.
I have two games that I have tried, Tiger woods 2005 and doom III, both of which crash in the same manner.
I have tried to be as detailed as I can with the descritopn of my computer below and the power details I'm not sure about so I posted a picture of the power unit to help.
Many thanks for your help in this matter, I'm desperately trying to get some worth out of this card and feel frustrated that its going bonkers only when trying to play games :/
Please tell me if you require further information about the system.
Neehar Shah
Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
Speed : 3.21GHz
L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte line size)
System BIOS : Phoenix Technologies, LTD 6.00 PG
Mainboard : Legend QDI PLATINIX-8
Total Memory : 511MB DDR-SDRAM
CPU
Model : Intel Corporation 82845G/GL/GE Brookdale Host-Hub Interface Bridge (B1-step)
Front Side Bus Speed : 4x 200MHz (800MHz data rate)
Total Memory : 512MB DDR-SDRAM
Memory Bus Speed : 2x 200MHz (400MHz data rate)
BOIS
Manufacturer : Phoenix Technologies, LTD
Version : 6.00 PG
Date : 06/19/2003
Plug & Play Version : 1.00
SMBIOS/DMI Version : 2.30
(EE)PROM Size : 256kB (2Mbit)
Video System
Monitor/Panel : SyncMaster 171S/ 175S/ 170S, SyncMaster Magic CX175S-AZ/LX175S
Adapter : NVIDIA GeForce 6800 LE
OEM Device Name : Nvidia Corp ??? (0042)
OEM Hardware ID : FUN_0, VEN_10DE, DEV_0042, REV_A1
Device Name : Micro-Star International Co Ltd (MSI) ??? (0042)
Product ID : VEN_1462, DEV_9751
Revision : K / 2 (161)
Physical Storage Devices
Hard Disk : Maxtor 6Y080L0 (76.3GB)
Hard Disk : ST3200822A (186.3GB)
CD-ROM/DVD : AOPEN CD-RW CRW2440 (CD 40X Rd, 24X Wr)
CD-ROM/DVD : PLEXTOR DVDR PX-708A (CD 40X Rd, 40X Wr) (DVD 5X Rd, 5X Wr)
Peripherals
USB Controller/Hub : USB 2.0 Root Hub
FireWire/1394 Controller/Hub : OHCI Compliant IEEE 1394 Host Controller
MultiMedia Device(s)
Device : MPU-401 Compatible MIDI Device
Device : Standard Game Port
Device : Creative SB Audigy
Device : Creative Game Port
Operating System(s)
Windows System : Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack 2)
Network Services
Adapter : Realtek RTL8139/810x Family Fast Ethernet NIC

Firstly, thank you for all your prompt responses, I really appreciate it. From the sounds of it, the PSU is ****
antec
From what I have read, the Antec PSUs have good reliability and ratings. I looked around and saw this one: Antec NEOPower 480W ATX PSU for around £65. I also went read that article posted by Dr Stu, which then stumbled on more articles about PSUs.
I have a couple more questions….
The rating of my system (http://www.jscustompcs.com/power_supply/Power_Supply_Calculator.php) with all the components running came out to be 422W. So do you think that the Antec NEOPower 480W ATX PSU would be sufficient for the computer considering I might add more RAM in the future?
Or should I buy the 500W+ one then?
Does anyone know if the Antec PSUs are quiet? My current q-Tec one makes me feel I'm in an aeroplane.
lucky I read the forum!
I was in Maplins (computer shop) at lunch and thought, that shiny 650W Q-Tec looks nice and there looks like loads of power, that much do the trick. i got to the counter and thought.....let me wait, till i get home from work and read some more on the forum about this PSU issue.
Thanks god I didn’t buy that S***. having read some of the reviews, i would have wasted loooots of money for nothing.

My iphone4S over heats when playing Asphalt7 .Is it normal?

Similar Messages

Maybe you are looking for