My iphone5 get hot using skype on 3G network
Hello Every Body
i have a problem with my iphone5. when i use skype,viber or fring using 3G or LTE network then my iphone5 become hot from back.
then i disconnect from 3G and connect with wifi and again i use skype, viber and fring. then its normal, not becoming hot
please reply me and guide me how to resolve this problem . i am too much worried about it.
Regards
Malik Kamran
Dubai
UAE
That is because the transmitter for 3G or LTE uses more power and gets hotter. The wifi transmitter doesn't because wifi is a local area network and usually is only about 50-100 feet away from the receiver. Cellular data towers are usually miles away from your phone and in order for it to maintain the connection it has to turn up the power on the radio which causes heat. When using a data intensive mode such as facetime or skype it will become hotter not only from the radio but from the processor too so it heats up even more.
Similar Messages
-
Ipad 2, can you use skype without a network connection?
ipad 2 can I use skype without a network connect?
Skyupi10 wrote:
It would be possible without network connections
No it wouldn't be possible.
I mean the network makes you communicate with others connect to one internal network. Though you can connect over cellular network.
Cellular network is still a network. -
Get Subscription Using Skype Credit
I am in Canada, trying to get the China 800min Subscription using my current Skype Credit (CAD$14.00), but i was transfering to the Chinese website all the time when i click Buy Now..
Wondering is there any way to buy subscription using Skype Credit?
ThanksSkypeUserNL wrote:
When I reactivate my skypenumber I do NOT get an icon where I can select Skype credit that I just paid for, just credit card options
Hello
Not all users can pay using Skype Credit. If the option isn't presented in the purchase flow it's not available to you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
Help
It all depends upon your configuration.
You should first determine in a case like this if your iPhone or other device has been assigned a valid DHCP address.
If you see a value like 169.x.x.x, you have not been assigned a valid DHCP address. This may occur for many reasons, most often because the DHCP server component of your router is not issuing them, or your device is not commmunicating with it. Valid DHCP addresses are generally in the ranges of…
• class A: 10.0.0.1 through 10.255.255.255
• class B: 172.16.0.1. through 172.31.255.255 and seldom used, and
• class C: 192.168.0.1 through 192.168.255.255
If you have a valid DHCP address, then the issue is likely that your router is not properly configured, in that it does not have valid DNS server addresses stored in its configuration files.
Generally, a router or gateway requires that you configure its assigned address, a valid subnet mask, and primary and secondary DNS servers. While you can use any valid DNS address for primary, secondary, tertiary and subsequent server entries, by convention, most technicians set the pair assigned by the internet service provider for your service area. In Eugene OR, for example, Comcast DNS addresses are set to…
• primary: 68.87.69.146 and
• secondary: 68.87.85.98
Check to see that your router or gateway configuration contains such information, as the result of being issued a valid DHCP address but not being able to identify a DNS server leads to the sort of issue outlined by the original poster.
You can easily determine if this is the case by querying a known site by its numeric address, rather than by its canonical name. If one takes you to the site but the other fails to do so, then you have the DNS issue I referred to. -
Using 3G network my iphone5 become hot
Hello Every Body
i have a problem with my iphone5. when i use skype,viber or fring using 3G or LTE network then my iphone5 become hot from back.
then i disconnect from 3G and connect with wifi and again i use skype, viber and fring. then its normal, not becoming hot
please reply me and guide me how to resolve this problem . i am too much worried about it.
Regards
Malik Kamran
Dubai
UAEThat is because the transmitter for 3G or LTE uses more power and gets hotter. The wifi transmitter doesn't because wifi is a local area network and usually is only about 50-100 feet away from the receiver. Cellular data towers are usually miles away from your phone and in order for it to maintain the connection it has to turn up the power on the radio which causes heat. When using a data intensive mode such as facetime or skype it will become hotter not only from the radio but from the processor too so it heats up even more.
-
Can iphone 4 make video calls using skype over 3g?
Hello,can i make video calls on iphone 4 using skype over 3g network?
Yes, Skype can make video calls over 3G. You do NOT need to jailbreak your phone. I believe the previous poster thought you were asking about FaceTime which does not work over 3G.
-
My iPhone was getting hot when used or charging. Went to Apple in Portland, OR. I did a reset on the phone. My IPhone is now making a random sound. Why??? How do I make it stop???? I have turned off all notifications. I do not have life360 or Skype. I do have Facebook, WordsFree, ScrabbleFree, Pandora.
I did the reset. I updated the iPhone to 6.0. The alert sound stopped for a while then started again. I had to go to notifications a few times to turn off some of the alerts and now I have peace, plus I learned more about the notifications. Thanks for your help. I did not need to go to the Apple Store.
-
my ipad 3 gets hot when i use it. i've read an article in wikipedia that apple will replace ipad3 to ipad 4. is it true? im from laoag city, ilocos norte, philippines.
Hello:
my ipad 3 gets hot when i use it.
Contact Applcare with a warranty issue.
Barry -
How can I avoid to get hot my Mac when i use Windows an Revit 2013 app.?
I' m a Arquitecture Student, and I should use Revit and this application is just for windows, an autorized apple technician Install windows, when I use the app Revit, after 20 to 30 minuts, my mac strart to get hot, and I can keep working. Stop and the start again. Is it possible that I don't have enoug graphic memory assigned, or video memory. Thnks for your help
Revit must be using the discrete graphics and possibly a fair amount of cpu as well. This has nothing to do with memory or memory allocation (which you can't do on a mac since it doesn't use shared memory like some low-end PCs do. Getting hot is not a problem as long as the fans speed up to increase the cooling. If the system is overheating, it will shut down on its own.
-
I have an ipad, when is being used it gets hot on the back, is that normal?
Warm is normal. The processor and battery generate heat. 'Too hot to handle', quite literally, is a good rule of thumb for when to stop using it and make an appointment to get your device checked out.
-
I Have had my IPhone 5s for less than a month and have noticed that it gets very hot while downloading apps/movies and while using GPS. (not at the same time) Battery life is also disappointing! Normal?? My 5 never had this problem!
Hi anthonym73,
If you are having an issue with your iPhone getting hot you may want to read this article for some guidance -
Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures
Thanks for using Apple Support Communities.
Best,
Brett L -
MacBook Pro is getting very slow after ~1h of using. It's not even getting hot!
MacBook Pro 15'
early 2011
OS X 10.9 (13A603) Maverics
2 GHz Intel Core i7
8 GB 1600 MHz DDR3
Intel HD Graphics 3000 512 MB
+my battery is dead and Im using cable all the time
When I turn ON my Macbook everything is OK, but after ~1h of doing whatever (surfin on net, listetning iTunes or watching movies) it's suddenly getting super slow. After that even scrolling down the websites is lagging and watching movies from HDD is impossible (glitchy and low fps). Macbook is not getting hot at all. Normal restarting doesn't work - it's slow as it was before (I need to wait long time to turn in ON again). Yesterday I decided to restart the SMC (Control+Option+Shift+Power Button) and after restarting Macbook it was OK again for another 1h.
I've already tried:
- cleaning with Clean my Mac 2
- scan with ClamXav
- restarting SMCI'm updating OS X right now (downloading).
Etrecheck informations:
Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM: 256 MB
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:9:56
Disk Information:
Hitachi HTS545050B9A302 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
System (disk0s2) / [Startup]: 145,4 GB (71,97 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
Heaven (disk0s4) /Volumes/Heaven: 301,98 GB (41,36 GB free)
**** (disk0s5) /Volumes/****: 51,73 GB (978,4 MB free)
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 46
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
[not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.5 - SDK 10.8) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.wacom.wacomtablet.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
None
Internet Plug-ins:
FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
Default Browser: Version: 537 - SDK 10.9
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
AdBlock: Version: 2.6.31
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Growl Support
Perian Support
WacomTablet Support
Tuxera NTFS Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
4% WindowServer
2% storeagent
0% ps
0% syslogd
0% mds_stores
Top Processes by Memory:
229 MB Safari
90 MB mds_stores
54 MB com.apple.WebKit.WebContent
49 MB Finder
49 MB WindowServer
Virtual Memory Information:
5.49 GB Free RAM
1.17 GB Active RAM
114 MB Inactive RAM
1.22 GB Wired RAM
192 MB Page-ins
0 B Page-outs -
No point of using Skype.. calls are getting drop f...
No point of using Skype.. calls are getting drop frequently..
I have waisted time and money too here.
My calls are getting dropped again and again.. now i am thinking how to finish available balance.
anybody can suggest me how to use my rest money because calling someone is not worth.Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
-
Dear sir while using the Internet 3G on my phone it getting hot at backside specially back panel below apple logo and after stopping the use of Net it becoming normal also for 3G I'm getting battery back up for 2 to 3 h
rs only plz tell me what to do plz reply it is normal or any problem with my phonePlease don't respond with useless comments. I've already addressed the fact that my screen was broken a few months ago. My phone may or may not be broken beyond repair either way, as I said before I can't afford a new phone. It's a strange problem because from what I can tell no one else has posted the same problem anywhere I can find. Don't be a dickhole.
-
My iphone 5 gets hot while using it and while charging too.... Please help me what should i do?? Should i replace the battery....?? Because it gets hot even within 5 minutes also.... And it is happening from 2 weeks daily.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...
Maybe you are looking for
-
In Attachement List Services for Objects White Screen when I Display a Note
Hi Expert, Need your assistance. I am trying to view a note in Vendor Master data but no information provided and I can only see white screen. Below are the steps that I performed: 1. Go to FK03 2. Open a Vendor 3. Click the Services for Objects 4. A
-
TS3276 How do I add another e-mail address to my computer
I want to add my wife's e-mal address to our home computer . She has an iCloud address with her iphone .
-
What is the recommendation for metadata, where to install the schema?
Should we install metadata in a separate database or in application database? I am looking for experts advise, also throw any links on requirments of having a schema in application database when we install metadata in its own database..Trying to unde
-
Trigger Order Acknowledgement automatically
Hi, We have a requirement wherein the sales order order acknowledgement is to be triggered when the line items in the sales order get confirmed. Please let me know how can this be achieved; is there any BADI / user-exit which might help ? The scenari
-
Measuring the constant volatge by using DAQ
Dear All. Sorry for disturbing again,i have one problem in measuring analog I/P,i created a analog VI measurement subVI,by using this SubVI i am going to have some 6 times repeated measurement,when i run my main VI 1st 2 measurement became low and 3,