My Iphone5 is going back for repairs, Can I put my Iphone5 Sim into my old Iphone 4?
As the title says
Thank you
The SIM will not physically fit.
The iPhone 5 uses a nanoSIM and the 4 uses a microSIM.
Similar Messages
-
Can I take out my SIM card and put it in an older phone while mine goes in for repair?
When sending my phone in for repair, can I take my SIM card out and use it in an older phone while mine gets repaired?
I believe so although the following also recommends discussing with your carrier: What to do when you return or send your iPhone, iPad, or iPod touch in for service - Apple Support
-
When i go to move app from dock the cloud shows but goes back to dock. can you please help
When i go to move app from dock the cloud shows but goes back to dock. can you please help
Drag it further away and it should release. It used to be that you just had to drag it off a little bit for it to delete. The new behaviour got introduced at some point in Mountain Lion.
-
Send back for Repair? Heat. Firmware. RAM.
Any experienced MacBook Pro users out there who can help me with my situation?
1. Brand new 17" MacBook Pro arrives (after waiting over a month from MacMall) and I install 1GB of EdgeCorpTech RAM, run Software Update, and install Final Cut Studio 5.1 (Universal) and run Software Update again.
2. Start working and during an encode in DVD Studio my brand new expensive Mac crashes. Tried about 7 times over and over again, each time either rebooting or hard locking.
3. The heat! The area above the keys is so hot you could burn yourself. The more it works, the more it heats. I hear no fans trying to cool it down, but then they might be very quiet. (I've heard the fans in an older PowerBook, and they are really loud. Are these supposed to be similar?) I've read a lot about this issue, and thought it might be why my system was crashing. I've also read that it's a "feature" where it acts as a heat sink. When I called Apple, they asked me a bunch of questions like they were taking a police report, and told me I needed to send it in for repair, but I would like to avoid doing that. If it runs this hot and the surface is a heat sink above the keys, I guess I'll just put up with it; when you're cooking you keep your hands off the frying pan! Think different, right?
4. I removed the 1GB of Edge RAM and no more crashes. It successfully encoded and it seems to be working, but the heat issue remains. I'm sending in the RAM for exchange. (Now I'm reading that someone else had this issue and that it may be the system having 2GB installed, regardless of the brand. I'll be able to test this in a few days when I get the new RAM.)
5. I puchased this Mac for a job, so I really don't want to be without it since I lost money waiting for it to arrive. Not only would I have received my order weeks ago had I ordered it from Apple, but Apple tells me they would have sent me a new one since I'm having this type of issue. Since I purchased it from MacMall, however, I was told I needed to contact them about it. I did, and MacMall is horrible. They tell me they have a "no return policy" on this. So they charge me brand-new price for a system that may need to be refirbished? They told me I needed to contact Apple. That's the last time I order from MacMall.
6. Apple sends me a shipping box to send it back for repair. I will be without it for 1-2 weeks. They also tell me I can go in and speak to a tech at one of their retail stores. I call the store to see if there's a tech available and they tell me I would need to come in to find out. Sheesh.
7. I'm hearing that a firmware or SMC update may do the trick. I have the following now:
Boot ROM Version: MBP12.0061.B00
SMC Version: 1.5f8
I called Apple support back 3 times and spoke to 3 different people. So far no one at Apple tech support has been able to tell me if I have the latest version.
To recap, my questions are:
Is this kind of heat normal?
Do I have the latest firmware?
Should I have it repaired?
If so, should I send it in or take it to the Apple Store?
Any help would be appreciated. Thanks!
MacBook Pro 17" Mac OS X (10.4.6)Thanks, people.
I'm worried about sending it back not just because I'll be without it but also because I've read horror stories about how they ding it up during repairs.
Do firmware updates go through Software Update? I've heard they don't, and if there's a new version my Software Update is not finding one. I can't find any info on the Apple site, and Apple Support reps don't know either.
If the heat is more of an issue with me than it is with the system, I can put up with it. Since the Apple Support reps can't even tell me what the latest firmware version is, perhaps they don't really know how hot the 17" MacBook Pro is supposed to run..?
When I ran the hardware test before, I didn't notice the fans running at full blast. I usually notice that sort of thing. Maybe my fans are not working. I will run the test again and make sure to pay more attention. Does anyone know if the fans on the 17" run more softly than the others? Also, to notice this, would I need to run the full test or just the quick one? I'll try both...
Thanks again for all your help and advice... -
I have two games tribez and tribez and Castle. As my new iPad air has a cracked screen I have to send it back for repair. I have to do a reset and restore backup when I get it back. Is there any way to back up above games. On tribez I have reached level 99 and will be annoying to starts again.
Do you have a computer with iTunes on it that you have associated the iPad with?
If the answer is yes, simply set iTunes up to back up the device locally, fully sync the apps, photos, movies, etc. A copy of everything, including the config of the device and all your settings (scores) will be made on the computer's drive. This even includes a backup copy of all the apps. When you get the replacement device (probably a refurbished blank unit), a Restore from that backup will totally reconstruct what you have today.
If the answer is no, you will have quite a bit more work to do in order to get back to the original state that the iGadget is currently in (minus the crack). -
i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?
i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?
-
I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?
In this case you won't be able to do that?
-
Can I put a SQL query into a bind variable and then use it to output report
Hi,
Can I put a SQL query into a bind variable and then use it to output report?
I want to create a report and an item "text area" (say P1_TEXT) which can let user to input a SQL query(they are all technical users and knows SQL very well). Then, I use a bind variable (that text area) to store the SQL statement. Then, I add a submit button and I want to use the following to output the report:
select * from (:P1_TEXT);
Do you think it is possible to do that? Any known limitations for APEX in this area?
Thanks a lot,
AngelaYou can, but make sure it's what you really want to do. Make sure you are VERY familiar with SQL Injection. Most people who know what it is, go out of their way to prevent SQL Injection. You're going out of your way to allow it.
You can try using &P1_TEXT. instead of bind variable syntax. Bind variables are one of the best ways to prevent SQL Injection, which is why it's not working for you.
Once again, I strongly urge you to consider the implications of your app, but this suggestion should get it working.
Tyler -
How can I access a calendar backup from my old iPhone?
How can I access a calendar backup from my old iPhone?
I recently had to get a replacement iPhone 4. The tech at the Apple Store thought that I might have had a software problem and recommended that I not "restore from backup," but start this phone as a new device and just sync the apps and what-not. My calendar on my computer was different than the one on my old phone, though, and now I need the data from my old iPhone calendar. I did back up my old phone just prior to taking it to the Apple Store.
HELP!Well what you can do is update to ios5 then use icloud to sync your calandar up to your phone then restore your phone as new and when prompted in the new phone setup put in your icloud username and password and you will have your calandar events back.
-
How can i get the itunes off of my old iphone if the files on my computer have been erased?
How can i get the itunes off of my old iphone if the files on my computer have been erased?
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer. -
If I buy a Verizon/Sprint Phone from Apple Unlocked at full price, can I put an ATT SIM and Run on the ATT network?
Verizon: Yes.
Sprint: No.
Sprint iPhones can not be used on any U.S. carrier other than Sprint. They can only be unlocked by Sprint for use on non-US carriers, and then only for current Sprint customers in good standing. -
I lost my iphone, got a new sim card and put it in my boyfriend's old iphone. When I synch it in itunes it will only synch with his stuff and not mine. Any ideas how I can get it to synch with my itunes??
Are you using a Mac? It sounds like you are using his computer to sync to. If this is the case, then it will sync to all of his stuff unless a new user is created with your personal stuff on it.
When you want to sync your iPhone to that computer, switch to your user first, and then everything will sync with your stuff. If he wants to hook up his iPhone to sync it, then he needs to switch back to his own username first. -
Hi all,
Im thinking of buying a friends iPhone 5C contract upgrade as he doesn't want it now...
It's on EE but still sealed un-opened etc
Can i put my Vodafone sim in and use it as i heard some phones are sim free until the first sim goes in to it?
Can i hear your input please.
Much appreciated,
JoIf locked to EE, you will have to get your friend to request that EE unlock it before it can be used on any other network. So, don't purchase until you have verified that your friend has gotten the phone officially unlocked.
-
Can I put RSA Public Key into the ISD in the JCOP?
Dear All,
Can I put RSA Public Key into the ISD in the JCOP? the command I put into the card as follows:
cm> /terminal "winscard:4|FT SCR2000 0"
--Opening terminal
/atrresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 69 00 FF 4A 43 4F 50 34 31 56 32 32 ;i..JCOP41V22
ATR: T=0, N=-1, Hist="JCOP41V22"
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 69 00 FF 4A 43 4F 50 34 31 56 32 32 ;i..JCOP41V22
ATR: T=0, N=-1, Hist="JCOP41V22"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(86244 usec)
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 o..............e
01 FF 90 00 ....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 51 39 AE 8E 0C 8B D9 50 00 .P...Q9.....P.
(132953 usec)
<= 00 00 63 06 00 26 29 91 06 75 FF 02 00 84 FC 69 ..c..&)..u.....i
60 80 B4 9C 9C 03 DB 99 9E F8 F4 67 90 00 `..........g..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 E6 A4 12 36 FD 7E 57 D0 2B 9D 5F ........6.~W.+._
65 30 D8 1B 00 e0...
(89378 usec)
<= 90 00 ..
Status: No Error
cm> put-key --mode add 115/1/RSA-PUB/0301000180ad97a22fe7cb29accc3a0b68844f0cb11d057ed8c80c5a4db856138030c419d0a27556902a939152ce79376b1cd0955ce4303bf7560c95230714c583ff8a8f12f1cf23d867e469773d15f0e708332651110cb615c8d373e86d57b5ffe7ff44bcc7690a4d68cbe07743b19879ac5beaeef6e1af133a1fd37b86a5339960b36e53
=> 80 D8 00 01 88 73 A1 80 AD 97 A2 2F E7 CB 29 AC .....s...../..).
CC 3A 0B 68 84 4F 0C B1 1D 05 7E D8 C8 0C 5A 4D .:.h.O....~...ZM
B8 56 13 80 30 C4 19 D0 A2 75 56 90 2A 93 91 52 .V..0....uV.*..R
CE 79 37 6B 1C D0 95 5C E4 30 3B F7 56 0C 95 23 .y7k...\.0;.V..#
07 14 C5 83 FF 8A 8F 12 F1 CF 23 D8 67 E4 69 77 ..........#.g.iw
3D 15 F0 E7 08 33 26 51 11 0C B6 15 C8 D3 73 E8 =....3&Q......s.
6D 57 B5 FF E7 FF 44 BC C7 69 0A 4D 68 CB E0 77 mW....D..i.Mh..w
43 B1 98 79 AC 5B EA EE F6 E1 AF 13 3A 1F D3 7B C..y.[......:..{
86 A5 33 99 60 B3 6E 53 A0 03 01 00 01 00 ..3.`.nS......
(281664 usec)
<= 6A 86 j.
Status: Incorrect parameters (P1,P2)
jcshell: Error code: 6a86 (Incorrect parameters (P1,P2))
jcshell: Wrong response APDU: 6A86
Why the card return error code ? I think the P1 P2 is correct, according to the GP2.1.1?
Thank you!It also can't input the RSA Public Key to the card, as follows:
cm> /terminal "winscard:4|FT SCR2000 0"
--Opening terminal
/atrresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B E9 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 32 ;....1.EJCOP41V2
32 A7 2.
ATR: T=1, N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V22"
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B E9 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 32 ;....1.EJCOP41V2
32 A7 2.
ATR: T=1, N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V22"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(86180 usec)
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 o..............e
01 FF 90 00 ....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 80 29 78 6F 21 1B 34 89 00 .P....)xo!.4..
(129908 usec)
<= 00 00 63 06 00 26 29 91 06 75 FF 02 00 00 93 73 ..c..&)..u.....s
3A B8 2C 0F D2 4C 06 E2 50 66 7F D8 90 00 :.,..L..Pf....
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 3E 88 4D 33 FD 7D A5 56 B6 90 84 .....>.M3.}.V...
78 94 BD B3 7A x...z
(97237 usec)
<= 90 00 ..
Status: No Error
cm> card-info
=> 80 F2 80 00 02 4F 00 00 .....O..
(60917 usec)
<= 08 A0 00 00 00 03 00 00 00 01 9E 90 00 .............
Status: No Error
=> 80 F2 40 00 02 4F 00 00 [email protected]..
(41315 usec)
<= 6A 88 j.
Status: Reference data not found
=> 80 F2 10 00 02 4F 00 00 .....O..
(73177 usec)
<= 07 A0 00 00 00 03 53 50 01 00 01 08 A0 00 00 00 ......SP........
03 53 50 41 90 00 .SPA..
Status: No Error
Card Manager AID : A000000003000000
Card Manager state : OP_READY
Load File : LOADED (--------) A0000000035350 (Security Domain)
Module : A000000003535041
cm> install -b -s -i A000000003535041 A0000000035350 A000000003535041
=> 80 E6 0C 00 20 07 A0 00 00 00 03 53 50 08 A0 00 .... ......SP...
00 00 03 53 50 41 08 A0 00 00 00 03 53 50 41 01 ...SPA......SPA.
C0 02 C9 00 00 00 ......
(227436 usec)
<= 90 00 ..
Status: No Error
cm> ls
=> 80 F2 80 00 02 4F 00 00 .....O..
(61204 usec)
<= 08 A0 00 00 00 03 00 00 00 01 9E 90 00 .............
Status: No Error
=> 80 F2 40 00 02 4F 00 00 [email protected]..
(66302 usec)
<= 08 A0 00 00 00 03 53 50 41 07 C0 90 00 ......SPA....
Status: No Error
=> 80 F2 10 00 02 4F 00 00 .....O..
(72365 usec)
<= 07 A0 00 00 00 03 53 50 01 00 01 08 A0 00 00 00 ......SP........
03 53 50 41 90 00 .SPA..
Status: No Error
Card Manager AID : A000000003000000
Card Manager state : OP_READY
Sec. Domain: SELECTABLE (SV------) A000000003535041
Load File : LOADED (--------) A0000000035350 (Security Domain)
Module : A000000003535041
cm> select A000000003535041
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(84625 usec)
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 o..............e
01 FF 90 00 ....
Status: No Error
cm> /card -a a000000003000000 -c com.ibm.jc.CardManager
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B E9 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 32 ;....1.EJCOP41V2
32 A7 2.
ATR: T=1, N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V22"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(83836 usec)
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 o..............e
01 FF 90 00 ....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 FA 3B 98 E7 B4 60 A8 CC 00 .P....;...`...
(128562 usec)
<= 00 00 63 06 00 26 29 91 06 75 FF 02 00 01 26 F7 ..c..&)..u....&.
25 4D B0 B9 D2 1D 18 99 F1 1F E8 25 90 00 %M.........%..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 C9 5D 27 4B C4 54 AC E5 D3 3C 8B ......]'K.T...<.
5F 2D B5 6B 87 _-.k.
(97825 usec)
<= 90 00 ..
Status: No Error
cm> set-key 1/1/DES-ECB/505152535455565758595a5b5c5d5e5f 1/2/DES-ECB/505152535455565758595a5b5c5d5e5f 1/3/DES-ECB/505152535455565758595a5b5c5d5e5f
cm> put-keyset 1
=> 80 D8 00 81 43 01 80 10 B3 6A 9E 82 2D 9E 8E 06 ....C....j..-...
8F B9 52 EA CA 63 FA 6B 03 A4 B7 D6 80 10 B3 6A ..R..c.k.......j
9E 82 2D 9E 8E 06 8F B9 52 EA CA 63 FA 6B 03 A4 ..-.....R..c.k..
B7 D6 80 10 B3 6A 9E 82 2D 9E 8E 06 8F B9 52 EA .....j..-.....R.
CA 63 FA 6B 03 A4 B7 D6 00 .c.k.....
(263198 usec)
<= 01 A4 B7 D6 A4 B7 D6 A4 B7 D6 90 00 ............
Status: No Error
cm> put-key 115/1/RSA-PUB/0301000180ad97a22fe7cb29accc3a0b68844f0cb11d057ed8c80c5a4db856138030c419d0a27556902a939152ce79376b1cd0955ce4303bf7560c95230714c583ff8a8f12f1cf23d867e469773d15f0e708332651110cb615c8d373e86d57b5ffe7ff44bcc7690a4d68cbe07743b19879ac5beaeef6e1af133a1fd37b86a5339960b36e53
=> 80 D8 00 01 88 73 A1 80 AD 97 A2 2F E7 CB 29 AC .....s...../..).
CC 3A 0B 68 84 4F 0C B1 1D 05 7E D8 C8 0C 5A 4D .:.h.O....~...ZM
B8 56 13 80 30 C4 19 D0 A2 75 56 90 2A 93 91 52 .V..0....uV.*..R
CE 79 37 6B 1C D0 95 5C E4 30 3B F7 56 0C 95 23 .y7k...\.0;.V..#
07 14 C5 83 FF 8A 8F 12 F1 CF 23 D8 67 E4 69 77 ..........#.g.iw
3D 15 F0 E7 08 33 26 51 11 0C B6 15 C8 D3 73 E8 =....3&Q......s.
6D 57 B5 FF E7 FF 44 BC C7 69 0A 4D 68 CB E0 77 mW....D..i.Mh..w
43 B1 98 79 AC 5B EA EE F6 E1 AF 13 3A 1F D3 7B C..y.[......:..{
86 A5 33 99 60 B3 6E 53 A0 03 01 00 01 00 ..3.`.nS......
(251210 usec)
<= 6A 80 j.
Status: Wrong data
Add new key set didn't work, try modify ...
jcshell: Error code: -3 (Invalid API parameter)
jcshell: Command failed: Invalid RSA public key
Is it something wrong ? -
How can i put my itunes library from an old mac g4 10.4.11 to an ipod2?
How can i put my itunes library from an old mac g4 10.4.11 to an ipod2?
Install iTunes 9.2.1 on your computer. If the device's requirements specify iTunes 10 or newer, you need to purchase Mac OS X 10.5 on DVD.
(63879)
Maybe you are looking for
-
Is it possible to connect a 22" cinema display to an ibook g4?
Hi all! So, I have the DVI to ADC adapter (with an attached usb cable), ADC to VGA adapter, and then the VGA to mini VGA that came with my computer. I have everything connected and I know the screen is getting power (I push the screen's power button
-
Tuning needed for sql:EXPLAIN PLAN attached
DB Version:10gR2 The below sql was running slow, so i took an explain plan SQL> explain plan for 2 SELECT COUNT(1) FROM SHIP_DTL WHERE 3 SHIP_DTL.PLT_ID = 'AM834' 4 AND SHIP_DTL.WHSE = '34' AND 5 SHIP_DTL.STAT_CODE != '845' 6 ORDER BY
-
Urxvt: copy current line without mouse
I want Urxvt to copy whatever I just wrote in the terminal without using the mouse, I just want to type a single combination such as Ctrl-m. I'm not sure if there's any easier way to do it, so I tried writing a perl function: sub tox { my ($self) = @
-
Hey gang, i used to be able to just click an rss feed and mail would auto ask me if i want to ask that feed. Now i have to copy the address bar and maually add it into my mail 'add rss feed' to get it in. Anybody know how i can get it back to auto
-
Hi everyone. I have a iPod nano 5th gen and every time I charge it, it comes up with the apple sign. It just won't turn on. I can restart it but it goes to the apple again. Is there a way I could get it replaced? I did win it in a game at penrith bow