My iphone5 is in the same room with an ipad, 2 kindles and 2 iphone4S and it's the only one that does not have a wifi signal. pls help
why does my iphone5 not have the same wifi coverage as 2 other iphone4s in the same room?
Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple Logo. If you are still not able to connect try resetting your network settings. Go into your settings>general>reset then tap reset network settings. If both fail to fix your problem try restarting your router.
Similar Messages
-
Oilpaint filter the only one that does not have .pbk file
hello,
i just learned about pixel bender and installed it in photo shop. i also copied the "pixel bender files" folder into plugins/effects directory for after effects to try them out there.
i really liked playing with the OILPAINT filter in photoshop, but when i looked for it in AE i realized something weird... there is no .pbk file for OILPAINT like there is for all the other filters. - so, it doesn't seem i can use it in ae...
does anybody know why this is? or how to work around it?
thanks
maxThe oilpaint filter is currently proprietary to Adobe which is why there's no PBK file for it. If you'd like to see it in After Effects you can make a request on the AE forums.
-
I have 6 email accounts on my iPhone 6 and want to delete one that is set up incorrectly. It is the only account that does not have the red DELETE bar...what do i need to do to delete it?
It is hosted by GoDaddy, is this the problem?Thank you so very much! That was just what I needed to do, problem solved.
-
I ha
If you have a non-Apple "main" router, then "join" would have been the only way it could connect.
Unfortunately, the Time Capsule does not provide any routing functions in this type of setup, so the Ethernet ports are not enabled in this setting.
If you have an Apple "main" router, it may be possible to enable the Ethernet ports in another type of setting. Then you could connect the old Mac to one of the Ethernet ports on the Time Capsule for Internet access. -
I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
My airport express only flashes amber even when it's in the same room with the modem.
I want to set it up as a wi-Fi extender.Your AirPort Express can only extend a wireless network provided by another Apple router if you want the network connection between them to be wireless.
What is the make & model of the wireless device that you are trying to extend with your Express? -
Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................
Open the document in Acrobat Reader and use the menu Window > New Window.
-
My htc-phone provides internet facility through cable/blue-tooth to my windows notebook. My htc-phone does not have a wifi or hotspot facility. Can the same internet through blue-tooth work for ipad2?
No, the bluetooth profile in the iPad does not provide that
capacity. Can your netbook be a wifi transmitter? If yes,
you can connect to the internet via htc-phone and pass
the connection to the netbook which will connect via wifi
to iPad. I am not familiar with the hardware in netbooks nor
the capabilities of Windows, so what I am suggesting looks
good in theory but the reality may not allow it. Still worth
checking into. -
I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li -
I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!
Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.
Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari. -
i just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.
Welcome to the Apple Community.
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p. -
Help
Hi istillFrustrated,
If you try to sync your device to a new computer that does not have your iTunes Library on it, then it will erase everything on your device and sync whatever is in the iTunes Library on the Computer you are syncing with.
You need to transfer your iTunes Library to the new computer, or you need to burn the CD to the iTunes Library on the computer you normally sync with.
Cheers,
GB -
Toshiba L755 is the only one that will not PXE BOOT
I have a few host on my network which it has VMWare 10 installed, successively performed deployment into those machines(Hosts and created VM"s). Now, I do have also a Toshiba L755-S5258 that will not complete the process, it does not give any
errors. The following is the messages it gives.
Client MAC ADDR: xx xx xx xx xx xx GUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXX
Client IP:XXX.XXX.X.XX MASK: XXX.XXX.XXX.x DHCP IP: XXX.XXX.X.X
Gateway IP: XXX.XXX.X.X
Downloaded WDSNBP...
Press F12 for network service boot
Windows Deployment services: PXE boot Aborted.
PXE-MOF: Exiting Intel PXE ROM
This si the only unit that does not follow through with the deployment
Note that I've deleted other machines that I successively deployed to from the Known Computers on Active Directory User and Computers, with not good results
Please any one help me decipher this headacheHi,
Are your using the WDS for the Windows deploy? A network boot program (NBP) is the first file that is downloaded and executed as part of the network boot process and it controls
the beginning of the boot experience (for example, whether or not the user must press F12 to initiate a network boot). NBPs are specific to both the architecture and firmware of the client. You must accounting the screen press F12 to allow the system boot
from the WDS. The VMware® workstation PXE booting issue please ask your software vendor.
The related KB:
Managing Network Boot Programs
http://technet.microsoft.com/en-us/library/cc732351(WS.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How do I update my ipad 2 if my OS is prior to 5.0, it does not have the software dropdown
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
1. Go into the iPad's Settings.
2. Locate and tap "General" from the menu on the left.
3. The second option from the top is "Software Update". Tap this to move into the update settings.
4. Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
5. Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
1. If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
2. Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
3. After canceling the dialog box, iTunes should automatically sync with your iPad.
4. If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
5. After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
6. From the iPad screen, click on the Update button.
7. After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
8. After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom
Maybe you are looking for
-
Hi All! I have a scenario I want some input on. 1 Mac Mini Lion Server 10.7.2 1 TC 2nd Gen x iPads x iPhones 2 Lion clients I want to use the Lion Server for all collaboration services, and use Profile Manager to provide central management of iOS and
-
Error when running a newly created mobile project
Hi, Every time I create a new mobile project in Flash Builder and try to run it I get this error message: TypeError: Error #1009: Cannot access a property or method of a null object refe rence. at com.coursevector.flashbug::Profiler/allComp
-
My iphone has stopped connecting to my wireless router, airport extreme. It happened a couple of days ago. It sees the router and shows it in settigns. My wireless printer shows it getsa signal, but will not print. My wifes phone works fine as d
-
How to read a word in a abap program for syntax check
program for finding keywords: into a given program name in selection screen. e.g Parameters Keyword in YXABC propgram. How to find a word in a abap program for syntax check
-
Is there a way to rotate an extrnal image in the report builder?
hello, my current format of this pictures is WMF. i want rotate an image by a condtion, is it possible?