My iPhone5 no longer detects my HP OfficeJet Pro 8600 Pro ePrinter after I updated to IOS7

My iPhone5 no longer detects my HP OfficeJet Pro 8600 Pro ePrinter after I updated to IOS7. Is anyone else experiencing this? I was able to print from my iPhone up until I updated to IOS7. Is there a fix for this? Thanks!

I hit the blue arrow on bottom of page, selected print, hit select printer, hit office jet 8600, then print. Before update I only had to select printer once and it would remember it. Now I have to select each time. Try turning your phone off, unplugging and then plugging in again your printer. Wait until it is completely on and then turn your phone on and see if you can select it. Hope this helps

Similar Messages

PC taking a LONG time to load everything before the win logo, after BIOS update.

Every single time I turn on my PC, it takes a REALLY long time to start the first DOS-like screen and then it takes another while before the windows logo shows up. About 4-5 mins before the win logo. It used to be fast and sweet before updating my MSI MB BIOS...
It all started when I updated the BIOS the first time (I just thought it was something good to do). The start up took a long time like 25% of the times and it got worse every month. I tried changing the config in the BIOS but nothing helped, so recently I decided to update the BIOS again with a flash drive step by step as indicated in the MSI website with their software, only to find out that the problem got worse and that it happened 100% of the times I turn my PC on.
When the start-up is slow, it gets stuck in that black pre-DOS like screen, showing a "B4" in the bottom right corner. After that the usual first screen with some info shows up for about 3 seconds, then it all goes black again and shows some other pair of codes on the same corner (B2, A4,....)
Today I tried manuallly reseting the MB to see if it helped (I removed the battey for a while, then used the reset CMOS button to make sure). It did not help at all. I have tried changing the hard drives from IDE to AHCI but windows 8 won't start: after showing its logo for a while, it shows a blue screen of death with the sad smily :( and tries to reset (I have to manually reset it afterwards). I have one 2TB WD green hard drive and one SSD in which I have windows 8 installed.
I found some text today on the MB MSI website on the BIOS versions page... which I didn't see at the time, and it shows up only in my smartphone: "We recommend to only update to the M8 class module if you have an Ivy bridge processor. There is no way to go back to the previous M module after the update" (this is from memory by the way)
Something to add, I used the Crystal Disk Info software to check my drives and it showed the were in good condition. Then used CrystalDiskMark 3.0.3 to test them and got low numbers in my opinion; for the WD green
Sequential Read : 76 MB/s, Random Read 512KB : 26 MB/s, Random Write 512KB : 41 MB/s.
And for the SSD
Sequential Read : 167 MB/s, Random Read 512KB : 161 MB/s, Random Write 512KB : 111 MB/s
My relevant PC parts are:
Intel i5 2500k (sandy bridge)
MSI Z68A GD65 (B3)
SSD Mushkin Chronos 120GB SATA 6GB-s (windows 8.1 installed here) (MKNSSDCR120GB)
2TB Western Digital HD (WD20EARS)
2x Ati 6950 crossfire
I also already tried turning it ON with everything disconnected, changing the video card slots, using only one... etc.
Any ideas on how to fix this or what's causing it? I really need some help here... If you need more info, I will be checking this constantly and will deliver your requests.

Quote from: dan.djh on 30-November-14, 23:06:20
I already fixed the IDE to AHCI problem, which was the minor one. Solution for this: Use regedit to change HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci\"Error Control" to 0 and delete StartOverride. Then you should be able to go into BIOS and change to AHCI mode. You'll need to do this again if you ever start up in IDE mode.
But I still need to fix the main one which is the slow startup... please help!
B4 is a USB problem! what USB devices do you have plugged in? (if its a keyboard and/or Mouse please say what they are like make and model!)

Can no longer download from some of my 'usual' places, even after the 'update'. WTF?

I've been unable to download ANYTHING from a few of my 'regular' places since I got this %#*@^ 'improved' Firefox. If it wasn't nearly impossible to do, I'd go back to the old one, at least it did ALL the things I use a browser for.
Here's the deal. I go to one of these websites, spy something I need, and try to start a download. Does it happen? NO! Why not? Because said website admonishes me that I already have my limit of downloads in progress! Seems simple enough, you think? Sure, except that I have NO f**king downloads in progress! That never happened with the older Firefox, the one that worked. I've spoken with the webmaster of a couple of the sites involved, and they've made no changes, have no other problems, BUT they advise me that MANY of their users who have this POS 'new' Firefox are having the exact same issue.
I hoped that, once you people issued an 'update' for this spiffy new Firefox4, you'd fix this problem. Surely I'm not the only person cursed with this problem?
Hey, look, if you can't or won't bother to fix this, would you at least have the decency to make it easy to go back to the OLD Firefox that worked reliably?
You can bet I'm making it my business to tell anyone and everyone I can reach that FF4 is a POS, and this is a very good time to find a new browser, like Chrome. Even IE manages to download from the website(s) FF4 no longer d/l's from.
I'd be ashamed, if I was you.
If it matters, mine is a plain vanilla PC, running 64-bit Win7, basic un-tweaked installation. I have the issue noted above whether or not I have any add-on's working. I've made sure to reboot the PC and restart FF4. I've downloaded and installed the alleged 'update', then again rebooted the machine, and still have the same f**king problem, website(s) think I'm already downloading. I never had this problem before I got this spiffy new Firefox4, and if it wasn't such a chore to remove it and go back to a Firefox that WORKED, I would have already done so. Now you've done an 'update', and apparently no one there gives a f**k about this. The websites involved are the same ones I've been d/l'ing from for years, with no problems, and they've made no changes. My PC hasn't been in any way changed, it's entirely the fault of Firefox4. What a POS!

http://kb.mozillazine.org/New_messages_do_not_appear

Z10 no longer able to link to hands free in vehicle after last update.

I download the last software update to my Z10 phone about two weeks again and now it will not remain link to my hands free for phone use in my vehicle. Is this a problem with the new software? I deleted the orginal link I had and started over from the begining and it worked till I shut off the vehicle and once restarted it would not link.

I did both several times, but I found the problem, it was a permission to syc that need to be activated, and once I re syc. all went well, I'm up and working again. Thanks for the interest.

HP Officejet Pro 8610 setup issues Is there a problem using a MIFI?

I just bought this HP Officejet Pro. After trying all day yesterday with your support team, it was suggested I take it back to the store. I did and have purchase another HP Officejet Pro 8610 and am having the same problems. The on button goes to sleep but I cannot push for it to wake, I must unplug it. In addition, I cannot get it to recognize the computer to scan unless I have it connected to the commputer so it can't be wireless.

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode. The sender receives an error "no answer".
When I call the fax number, if I touch the screen it will wake up immediately to receive the fax.
Printing from the computer while in sleep mode works fine.
Please advise. Im missing important faxes and can only set sleep mode to a maximum of 15 mins, so I have an alarm set to touch my machine every 15 mins. sigh...
Thank you,

Hi Willia,
Welcome to the HP Support Forums! I see when your HP Officejet Pro 8625 enters sleep mode, you are unable to receive any incoming faxes. The senders will receive a 'no answer' error. I understand your printer will wake up from sleep mode if you send a print job.
First let's go ahead and make sure the OJ 8625 is plugged directly into a wall outlet, using a power bar or surge protector can cause the printer to lose basic functionality over time. To get a better understanding take a look here: Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
Now, I would like you to update your printers Firmware, click on the link below and follow the on screen instructions:
HP Officejet Pro 8620/8625 Firmware Update
Are you now able to receive incoming faxes when the OJ 8625 is in sleep mode? If not, I would like you to contact our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Connecting form MAC OS 10.7.5 to HP officejet pro 8620

I am running MAC OS 10.7.5.
Have just bought HP officejet pro 8620
After initial setup wireless printing worked but then stopped and now when I try to print the computer cannot find the printer.
I have reinstalled the soft ware - both printer and computer are showing full wireless connection.
Also tried plugging in direct wire connection and still does not find the printer!!
Help please

Hello,
From the post i understand that when you install the printer it doesnt find the printer.
Could you please provide me with more details like when it stopped printing did the printer encounter sleep mode issue.
Whats the model no of the router.
When you try to add the printer to the print and scan is it identifying the printer as Bonjour Multifunction.
Try the below steps.
1- Restore network default.
2- Check if the printer name is listed under in Print and Scan under System Preferences. If Yes
3- Press the Control Button or Right click and click on the Printer icon " Reset the Printing system" this will remove all the printer in the queue.
Run the wireless setup wizard and see if you can find the router and get connected
Go to System Preferences, click on the + symbol on the Print and Scan window see if it identifies the printer.
If fails lets try using wireless direct.
Click on the wireless Direct icon and enable wireless direct, its present left side to the Wireless icon on front panel.
Click on the Wireless icon on the Mac select the Printer Name.
Now go to Print and Scan window and see if you can add the printer.
Thanks..
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

Officejet Pro K5400 printing problems after update to Mavericks OSX 10.9

Hi,
I have printing problems with my Officejet Pro K5400 after update to Mavericks OSX 10.9.
Now after printing 1 page the printer prints an extra page with '2345X' sentence on it. As this problem started right after updating, I suppose there is a problem with an update.

This patch did solve our problem with the K5400 feeding a "blank sheet".
Thank you.

Windows no longer detecting my Audigy 4?(Non-P

Hey all. I've had my Audigy 4 (non-Pro) installed and working super for about 50 days, but it started giving me a weird problem. Windows was no longer detecting the card! It was weird. DX Diag, programs like EVEREST... they all report no sound card whatsoever.
Here are my PC specs:
XP Home Edition
Albatron K8X800 Pro
S754 3200+ ClawHammer
x 2 OCZ ELPE 52 MB(2-3-2-5)
Visiontek XTASY X850XT PE
x 80 GB SATA 2 Seagate, x 80 GB Maxtor
Some other things to note:
XP has been repaired. Went from Service Pack , updates, and all the way to Service Pack 2. The card requires XP w/SP2, yes, so I have that covered.
Onboard audio is disabled through the bios. I have AC'97 integrated audio on this.
My motherboard has fi've PCI slots - although I can only access 4 because my video card is in the way, and I have tried three of those and I get the same problem.
I have tried it in other PCs in my house, double-checked each time - so it is not ESD as I originally believed. It works just fine on those PCs. It is being not located only on MY PC.
So guys and gals, I do not know what to do... I am stumped. It's the weekend so I can't call Creative support until Monday. I don't want to request an RMA through my warranty because clearly it's just a problem with my PC. What should I do?!Message Edited by Celsius on -26-2005 07:36 PM

Device not recognized in iTunes

Iphone is no longer detected on itunes/computer it is synched with.

One of my Iphones is no longer detected by the itunes/computer that it is synched with. The computer/itunes does detect other devices. The iphone in question is able to be detected on another computer/itunes.
I updated software oof iphone on another computer. I updated itunes on the computer that does not detect the phone. I rebooted both. I tried software conflict.
Does anyone have an idea how to resolve? I have all of my contacts, apps, photos, music etc on that computer.
When I updated phone software on another computer to see if that was the problem it wiped out all music,apps, photos etc on the phone. I have thee devices with one apple id and they are synched to different computers.

You should try another USB cable, charging and sending data through the cable is not completely the same, sending data is using other contacts inside the plug or docking connector.

Windows XP is no longer detecting the iphone

Out of the blue my desktop is no longer detecting or charging my iphone. It doesn't show up in device manager either.
I have reinstalled all software,drivers and no luck. All services are running.
It works fine on my laptop and charges fine on the wall charger.
I have tried my friends iphone on the desktop and it also does not get detected, so I assume it has to be some software problem.. Any ideas?

Hello,
I have a similar problem now. Only addition is that the phone itself is not working either and when i connect to comp it results in opening of 'Found New Hardware wizard'
Did you find solution to your problem???

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

After updating to iTunes 10.6.0.40, it no longer detect my devices

I have checked this on two of my Windows 7 laptops, two cables, an iPod Touch, and a iPad 2... iTunes no longer show apple devices (cds still appear) listed on the sidebar. Windows detects an Apple Drive everytime i plug it. I have tried restarting the services associated with apple devices, reinstalling iTunes on one of the laptops, resetting the iPod and iPad, still nothing. This just happened after i updated tonight.

Hi, for me the problem was disconnecting other external device (here all bluetooth devices, external monitor etc). After reboot of my macbook pro, iTunes recognized both my iphone and ipad. I can only guess some kind of hidden device conflict causes this.
More details here: https://discussions.apple.com/message/17823179#17823179
Not sure this works for you; not sure this works for itunes Windows. Eliminating third-party device conflicts by switching off various external devices and then rebooting may be worth a try though.
Cheers
bauhws

After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone.

After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone. On my iPhone I now suddenly get the question: Do you trust this computer (after connecting to the usb port)

Try this!
I had the same problem as you an it worked for me.
http://support.apple.com/kb/HT1923

My HP Officejet Pro 8500 A910 will no longer print aqua.

My HP Officejet Pro 8500 A910 will no longer print aqua. I just tried two new cartridges and when I clean the heads, no aqua prints. I get no error messages however.
One possible issue: Recently I used a new HP aqua print cartridge (940XL version) that kept stalling my printer. If my printer sat without printing for 10 minutes or more, the only way I could get it to print would be to shut down the printer and restart it. Then, as long as I kept printing, it worked fine. When I replaced the problematic print cartridge the printer works fine except now it won't print aqua. Could the problematic cartridge damaged something?
I looked at the print head and it looks fine. What is strange is that NO AQUA INK at all shows on the print head page.
What should I do? Help!

Hey @CWickstrom ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I recommend calling HP Technical Phone Support for this issue I believe you will be given options and help I can't.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
I worked for HP.

My iPhone5 no longer detects my HP OfficeJet Pro 8600 Pro ePrinter after I updated to IOS7

Similar Messages

Maybe you are looking for