My iPhone5 suddenly showed the message "No SIM" - I tried resetting the phone but that did not correct the problem. Any Suggestions?
My new iPhone5 suddenly showed the message "No SIM" - I tried resetting the phone but that did not correct the problem. Any suggestions?
http://support.apple.com/kb/TS4148
Similar Messages
-
My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?
Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again. -
I have the iPhone 5 and iPad 3. I will travel to Europe and would like to know if I need a current covertidor 220-110 for my equipments. I have an adapter, but that did not change the flow and do not want to risk it. Thank you.
All you need is a physical plug adapter, not a voltage converter. All Apple chargers work on any voltage from 110 - 240 worldwide.
-
I am trying to configure a Cisco RV120W wireless using RADIUS. The IAS server is Windows 2003. The wireless client can’t access the wireless. The ISA server keeps getting this error: Event Type: Warning Event Source: IAS Event Category: None Event ID: 2 User: N/A Computer: DEVICES1 Description: User ntdomain\blin was denied access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.30.102 NAS-Identifier = Called-Station-Identifier = Calling-Station-Identifier = Client-Friendly-Name = RV102-Domain Client-IP-Address = 10.0.30.102 NAS-Port-Type = NAS-Port = Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = EAP EAP-Type = Reason-Code = 70 Reason = The user attempted to connect using a dial-in medium that did not match the restricted dial-in media. Check the dial-in constraints for the matching remote access policy. The public wireless and WPA2 work fine. Other Cisco 1240 wireless works fine with this event: Event Type: Information Event Source: IAS Event Category: None Event ID: 1 Date: 10/18/2013 Time: 1:33:19 PM User: N/A Computer: DEVICES1 Description: User blin was granted access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.20.103 NAS-Identifier = WLC2504 Client-Friendly-Name = WLC2504 Client-IP-Address = 10.0.20.103 Calling-Station-Identifier = 90-18-7c-e6-95-aa NAS-Port-Type = Wireless - IEEE 802.11 NAS-Port = 1 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = PEAP EAP-Type = Secured password (EAP-MSCHAP v2) Can you help?
Dear Customer,
Thank you for reaching the Small Business Support Community.
The RADIUS configuration settings are intended to authenticate the wireless clients attempting to connect through a SSID and if this is the problem you have, I first suggest you to check on the RADIUS server IP address (Security>RADIUS Server), make sure it is reachable, and the authentication port number used by this server to send traffic and the shared key used to authenticate to the server which must match on both sides. If all that is good, try using WAP Enterprise as the wireless security method and not WAP2 Enterprise.
If the problem persits I then first suggest to to make sure you run the latest firmware release version 1.0.5.6;
http://software.cisco.com/download/release.html?mdfid=282981372&flowid=796&softwareid=282487380&release=1.0.5.6&relind=AVAILABLE&rellifecycle=&reltype=latest
Then contact support if the problem persists; (the "dial-in medium" part error I just don't understand what it has to do with the RADIUS wireless client authentication);
https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
Please do not hesitate to reach me back if there is any further assistance I may assist you with in the meantime.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found. -
Since updating to iOS 5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to resolve this issue.
There is No Pre-installed Youtube App in iOS 6.
http://itunes.apple.com/app/youtube/id544007664?mt=8 -
I downloaded the upgraded to itunes. It is now not recognizing my ipod nano. I uninstalled the software from my Windows 7 and then reinstalled. The computer recognizes the device, but itunes still does not. Any suggestions...
Try Here > iPod appears in Windows but not in iTunes
-
a message of 500 internal error comes up when I open up Firefox and I cannot do anything. How can this problem be solved? I cannot use Firefox, so I have uninstalled it because it does in work on my computer, but it does work on my desktop and other laptop. This is a new computer, so I am not understanding why this problem is occurring. When I first installed Firefox on my new laptop it worked just fine, but for about a week now it will not work.
Which security software (firewall) do you have?
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls -
This is my first time doing this but I need help, I don't know if this is fixable but its okay to ask right? But yeah i push log in and it refrshes and goes to the home page so I don't know what to do, and I've reset my iPod before aand that didn't work.
Try resetting the iPod > iPod touch: Turning off and on (restarting) and resetting
-
This had better be reversible.
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
* http://kb.mozillazine.org/Lost_bookmarks -
My G5 is not booting up and it sounds like an airplane taking off. I replaced the 3.6V battery, but it did not correct the problem. Any suggestions??
Resetting the Logic Board
Resetting the logic board can resolve many system problems. Whenever you have a
unit that fails to power up, you should follow this procedure
before replacing any modules.
1 Unplug the computer.
2 Press the Power On button on the front of the unit.
3 Open the side access panel.
4 Remove the battery from the logic board.
5 Wait at least 10 minutes before replacing the battery.
6 Make sure the battery is installed in the correct +/-
direction.
7 Reassemble the computer and test the unit.
Cheers, Tom -
i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!
Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off. -
I can't send any pictures on the message application. It tries to send it but ends up saying "Not delivered and an !" How do I fix this?
See:
* [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon ([[Site Identity Button]]) on the left end of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain. -
How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and then back up the phone again will they transfer or be erased? I am a bit gun shy since my previous macbook pro committed suicide and I lost a ton of info there.
Copy everything from your backup copy of your old computer.
-
I have iphoto 6 and my pictures are no longer showing. I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?
How did you rebuild?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
I get the message "an error occurred while processing this directive" but no hint of what the error
I am trying to download Photoshop for the first time. I get the message "an error occurred while processing this directive" but no hint of what the error is or what I should do about it.
Graham which version of Photoshop are you referencing? Also which operating system are you using? Finally can you please post a screen shot of your error message?
Maybe you are looking for
-
I've been using high quality retina screens for about nine months now and my vision has gone downhill quickly. I got my first ever prescription for eye glasses and my eyes are constantly strained. High resolution screens also cause other problems wit
-
Indesign CS5 with PNG file exporting as a PDF file but the text is random bold
Hello, I am looking for help to teach me how to solve this problem. I use Indesign CS5 to make a proposal. I set the page marker and sub title in the master page. Of course, there are including dozens of pages and some pictures here. And one of these
-
How can I monitor the used memory
Does java have any API function to monitor how much memory of the java-application used?
-
Replication feature of oracle9i
we are trying to create and manage replication environment using replication management APIs. we'll be having standard/enterprise edition of database at master site and personal edition at materialized view site. do we have to install replication fea
-
Quick question - SSD for OS or Scratch?
I am in the process of building a new machine with a Haswell cpu, and some raid drives as suggested by Harm, but if you could only afford one 256gb SSD, would it be better to use it as a scratch disk for Premiere or OS/Apps? Thanks