My iphone5 will die or just turn off, when I plug in the charger the screen just keeps turning

My iphone5 will die or just turn off, when I plug in the charger the screen just keeps turning off and on. It will do this for hours until it finally stays on and charges. I've gotten a new charger, but it didn't work. Help

Hi there katygracie88,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. 

Similar Messages

  • My IPod 4th doesnt not turn on when i plug in to charge it its still wont turn on i need help and the screen is black help please!!

    ok last night i was ok and nothing happend to my ipod but, when in the morning just to cheack the time its off and i didntturn off the ipod so i thought if it out of battery ill charge it. then when  i plug it in to an outlet it still wont turn on please help i tried everything how turn it on and such it still wont turn on help!!! Please!!!

    Try here:
    iOS: Not responding or does not turn on
    If not successful then time for an appointment at the Genius Bar of an Apple store.

  • Any fix to iTunes music turning off when iPad 1 put onto charging stand?

    Any fix to iTunes music turning off when iPad 1 put onto charging stand?

    Ok, I found a solution that worked for me when trying to connect to the iTunes store by tapping the "update" button in the "App Store" app on my iPad 2. Before the solution was implemented I'd always get the error message "cannot connect to iTunes store". Once the solution was implemented I now can connect to iTunes using the "update" button in the "App Store" app and I get the normal message "All apps are up to date". The solution is this:  go into Settings, then General, then scroll to the bottom where it says Date and Time. Tap Date and Time and then turn OFF Set Automatically. When you do that a new option will be added that says Set Date and Time. Tap it. You'll now get a drop down feature. Set the Date AHEAD 2 YEARS. The Time you can leave alone.
    Once you do that you might get a bunch of reminders and messages that your apps and stuff haven't been updated in two years. Click cancel or close on each of those messages or reminders. Now go back into Settings, General, Date and Time, and turn Set Automatically back to ON. Reboot your iPad. Open the App Store app again and go to the Update button. It might ask you to log back in to your iTunes account. It should now work. If not, close the App Store app completely and open again and try the update button. Hope this helps.

  • HT4061 the screen is blank and the phone does not respond even after pressing the on/off and home button. the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

    The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

    This is the ipod touch forum

  • My mac won't turn on and when I plug in my charger the light flickers but it won't charge my mac

    It suddenly turned off when I was using it and won't turn on and the charger light flickers and won't charge my mac

    If you have another power cord try that, maybe you'll get lucky.

  • HT201407 My i-phone just went dead. when I plug it to recharge the batery, the only thing that it shows is an apple cut in the middle. What happened? What should I do?!!!

    My i-phone just went dead. When I plug it to recharge the batery, the only thing that it shows is a sign of a broken apple. What happened? What should I do?!!!

    Try resetting your iPhone. If that doesn't work, try to restore the iPhone.

  • My iBook just shuts off when it is still partially charged. Help?

    Hello, I have an 14" iBook G4, and have been having problems lately with the computer shutting off (going dead, and not into sleep mode) after it has been running on battery power for awhile. It usually shuts off when the battery is at around 45-60 percent charge still left. It never shuts off when plugged in to the charger. Here are some specifics on the battery from the System Profiler:
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 1545
    Remaining Capacity (mAh): 1542
    Amperage (mA): 0
    Voltage (mV): 16543
    Cycle Count: 225
    I have been thinking about getting a new battery but I just replaced this one a year or two ago so I don't think it should be bad yet.
    A few things that I think might be causing the problem might be that I upgraded this computer a while ago by putting in a 100 GB hard drive and putting in a Superdrive (it originally had a 40 GB HD and a Combo Drive). I also have an extra 512 MB of RAM installed. I also just recently upgraded to Mac OS 10.4.11. I had been running 10.4.6 for the longest time (mostly because I always though it was safer because sometimes when I had updated computers in the past they'd run into problems. Plus, I have software that I knew would run with OS 10.4.6 - plus the install discs).
    Anyway, let me know what you guys think I should or could do to fix this problem. I'm on my computer all the time so I should respond quickly to your guys' (or girls') advice.
    Thanks for any help you can give. Later

    I looked into resetting the PMU (although I think I already tried that a week ago), I don't know if something specific is supposed to happen to let me know something was reset but everything functioned pretty much as normal.
    I tried recalibrating the battery with minimal success, it went down to 31% then actually said 0% and died. I tried recalibrating twice and it doesn't go into sleep mode, it just dies. It'll go down to 0% and still not go into sleep mode. Now my battery reading says this(with the power cord unplugged):
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 1315
    Remaining Capacity (mAh): 1313
    Amperage (mA): -778
    Voltage (mV): 16178
    Cycle Count: 225
    I took continual readings of the Battery in the System Profiler and pasted them into a Word document when the computer was at 0% capacity and was still on but wouldn't go into sleep mode (it eventually just died). I can post some of those on here if you want.
    I also tried that Coconut Battery program to let me know any new information about the Battery and it says nothing really new. It says the battery has a max capacity of 1315 mAh (although just couple of days ago it used to have around 1500mAh - read my first post above - I don't know if that means I've made progress or the battery is worse off then when I started) and also the Battery originally had 4400 mAh capacity (so now it's at about 29% of its original strength).
    One thing did disturb me though is that the battery might not be recording the number of cycles correctly. Even though I've gone through at least a few charges in the last couple of days, it still says "225" and it should be higher. You'll even notice that it said "224" in the Battery Information in my first post. I've gone through at least a couple of complete discharges, I would think.
    Anyway, I hope there are some more options on the table, but I'll see if I can keep re-calibrating it and it will finally work. I am starting to wonder if its the battery or the module inside it or some other problem. Anyway, thanks for the help.

  • Iphone turned off when i plugged it in to a docking station and won't turn back on

    i was going to listen to some music on my vivo docking station and my boyfriend put his iphone on the docking station and his phone just turned off and wouldnt turn back on i put mine in and the same happend.. anyway my boyfriend called apple and spoke to someone who told him to hold the home and lock button to reset the phone this didnt work he then told us to hold the home button and plug it into a computer. My boyfriends worked but had completely drained the battery so he charged it and its fine, we tried all the same things for my phone and nothing will work anyone got any ideas? Iphone 4 16gb by the way.
    Thanks

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    If this does not work, get it serviced:
    Apple - Support - Service Answer Center

  • Computer turns off when I plug Ipod Touch in

    Hi everyone,
    I was just wondering if anyone could give me some advice. Each time I plug my Ipod Touch into my computer and open iTunes it resets the whole computer. It will keep on doing this until I take my ipod out of the usb port. I tied plugging it into my other PC and accessing the few songs I have on there and it worked fine.
    I'm not sure what's going on, Wether its my Ipod or if its my computer (both pc's by the way).
    Any help will be much appreciated.

    You can start by turning off the caps lock.
    You need to try a few things - reset your iPod and check on what is happening with the Apple Mobile Device Services on your computer.
    If you don't know how to reset, click the Support tab at the top of the page and then click on Troubleshooting.
    As to the AMDS problem, see this article: http://support.apple.com/kb/TS1567

  • HT201269 I have an IPhone 4 that turns off.When I plug the phone into a outlet, it says to connect to iTunes. But my phone doesn't connect. I need to backup info to sync to a new iPhone. Is there another way to get the info from the old one?

    I have an IPhone 4 that turns off on its own. When I plug the phone into an outlet, it says to connect to iTunes. When i connect my phone to itunes, the screen displays the apple icon and doesn't connect to iTunes.  I need to backup info on this phone so I can apply my back up to a new iPhone. Is there any another way i can do this? My older phone will not show it's connected to iTunes. I used iCloud on the phone with problems, but I didn't back up all the info thru iCloud. Is there another way to back up?

    Sounds like your phone is in recovery mode.  In this case, all data on it is gone.  There's nothing to back up.

  • My phone turned off by itself while it was charging and it does not turn on

    Good morning, I have an iPhone 5 iOS 8.2 I believe.
    I connected my phone to the charger and went to sleep as usual and when I woke up it was off dead and since that I can not turn it on. I tried to turn it on several times but it did not work
    please help me with this issue.
    Asmaa AlRawe

    IIt happened with me 2years ago with iPhone 4s running ios6,i thought the phone is dead, try to restart ur phone(even if it looks turned off) by holding power button and home screen button together till apple's logo appear , it worked with me b4,good luck and best regards.

  • The screen color just went off when I connect WD thunderbolt and Viewsonic Screen.  What can I do?

    I bought Macbook Air with WD Thunderbolt and Viewsonic screen.  If I connect the screen to Macbook Air, it works.  I connect Hard Drive first and screen connnect to Hard Drive.  The color just went off.  I have try on RGB and DVI.  It has same result.  What can I do?  Bugs?

    It might be best to ask only one question in each post otherwise you may never be able to mark them as solved.
    I went to Starbucks this morning and my Wi-Fi on my Verizon Iphone connected, what does this allow me to do?
    It should allow you to access the internet, read mail, etc.
    My Wi-Fi does not recognize my home network from which I connect wirelessly to my MacBookPro and to my Apple TV using Airport Extreme router, why?
    Try restarting your router (remove power for 30 seconds and restart). It may not be properly assigning an IP address to your iPhone.

  • IPod turns off when i plug in a 1/4 inch jack.

    Whenever I plug in a headphone jack into the ipod it turns off!
    I can't use my iPod.
    Has anyone had this problem?
    This is my 4th iPod in a year.

    A 1/4 inch jack won't fit into an iPod, I assume you mean an adapter to go from 1/8 to 1/4 inch?
    The iPod headphone jack has a feature that pauses Playback when the headphone jack is pulled out. Sometimes certain jacks inadvertently activate this feature due to minor differences in jack design.
    You may be using a Mono Jack Adapter (which has only one Black band) or a Stereo Jack Adapter (which has two black bands). Either one could be causing this problem.

  • Macbook Pro turns off when I put my iPhone by the left speaker

    I have a Retina Macbook Pro from 2012 and an iPhone 5c.  When I put my iPhone in a certain spot just under the left speaker of the computer, the computer will go into sleep mode without any buttons being pressed.  Is this something I should be concerned about, because it seems really odd.

    Magnets inside the iPhone can trigger sleep. That is normal.
    Keep iPhone away from the MBP.
    When you close the lid, magnets placed inside the lid triggers the sleep.
    http://support.apple.com/en-us/HT203315
    Best.

  • Help!!! my computer turns off when i plug in my iphone

    the second i plug in my iphone my computer displays a blue screen and says something about an error and it shut off that second. then when it restarts it says it again until i unplug the iphone and then windows says recovered from serious error or something like that any ideas the phone and the computer work perfectly

    Do you have any other peripherals connected to the computer when you connect the iPhone. If so, disconnect them and try again.
    Make sure you're connecting the USB cable correctly to the computer. I've seen a few instances where the USB pin on the computer was bent down and the USB cable was connected upside down.
    This could also be caused by a damaged photo. If it's okay with you, you might try deleting the photos you've taken with your iPhone and then connect. If you don't want to lose the photos, you can email them to yourself.

Maybe you are looking for

  • Songs are greyed out. Error -5000

    My songs will not sync to my iPhone. They are still located in my iTunes and play just fine, however they also show up in my phone, only they are "greyed out" and I cannot play them from the device. When I sync the iPhone, I always get an "Unknown Er

  • Upload File using MDS WCF API

    I have a field of File Type in my Entity. How can I upload file using WCF API? I tried to create a new Entity Member and added the following attribute in the member attributes collection Attribute att = new Attribute(); att.Identifier = new Identifie

  • Discretionary updates and opening a cursor from passed parameters

    I am trying to pass a list of item IDs into a procedure, and have the procedure loop through a cursor of those items, working out the length of columns and taking appropriate action when the length of the data threatens to exceed the length of the co

  • Validation Report

    HELLO EXPERTS Can you give me some ways how will i make a validation report and how will it be able to identify what fields or specific report there is unbalanced data tnx regards Clodualdo David

  • 2960X - show ip route - shows unknown routes

    Hi all, I noticed on a 2060X which is connected to a vPC pair Nexus 5500 unknown routing entries.  The displayed default gateway (.11) was present on one of the old Core Switches. While doing the migration the cisco Nexus acts now as the default gate