My iphone5 wireless performance isnt great with my new router

Ive had zero problems before with my old one, but it was giving me NAT problems with my xbox. So I decided to switch my router and I got the new one. The cisco EA3500. It works great with my Xbox and PlayStation but it doesn't work so great with my iPhone5. Ive noticed that my videos often stop or give me errors on youtube when they didnt before or when i turn off my wireless. It doesn't matter whether I'm close or far from the router it is the same bad performance. Are there any settings I can play with??

Id also like to mention that i have rebooted everything and it has changed nothing. Im on Wireless N, 2.5 channel.

Similar Messages

HT204387 Can a wireless mouse be used with the new IPAD?

Can a wireless mouse be uses with the new iPad?

While it is true that mice or other pointing device like track pads are not supported on the iPad since there is no real pointer, I use a stylus pen. I know it would probably tip over the iPad if you are standing it up, but it's the closest I've seen. I use the Wacom Bamboo stylus and a Zagg keyboard and the case for the iPad and keyboard. I use the stylus a lot on the Paper app to take notes in meetings and such. Not really a solution but if you are trying to move an insertion point in a document, it does work.

Photosmart C4780 won't work with my new router.

Hi
I have been sent a new plusnet TG582n router after my old one broke and now my wireless printer won't work.
I have tried uninstalling the software and connecting the printer via USB to reinstall on my windows 7 netbook but it came up with drivers failed to install.
On my windows 8.1 laptop I have uninstalled and reinstalled and this was unable to complete. I have now done a restore to a previous setting on both of them so the software and drivers are still on.
I have tried connecting my printer via USB cable but this tries to install the software again.
If I go into devices my printer shows up with error and won't print.
After trying all this I have now done a restore on the printer to factore settings (also trying the uninstall and reinstall via USB after this) and it still won't work.
After doing a wireless test report it came up with my old ssid initially even after installing my new router which has a new ssid. After resetting the printer it now comes up with SigmaplusEOL1. It shows on the report that wirelss is on and working but ssid fail.
I don't know what else to try as I have spent hours tyring different things and done trouble shooting several times.
I have also been told by plusnet that t he routershould work for wireless n or wireless g.
Please help!

Hi Tazza,
Welcome to the HP Forums! I understand that your HP Photosmart C4780, will not work with your new router. I am happy to help you with this! I believe these following guides should help:
The Printer is Not Found During Wireless Network Installation in Windows.
Printer Does Not Maintain Wireless Connection.
Just to make sure the hardware is functional, can you make copies standalone with the printer? Or what happens when you print a status report? Video of Printing a status report.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My Macbook Pro 13' from 2011 keeps kicking me off the internet, even though my internet service (complete with brand new router) shows strong bars. Any help?!

I've had this 13 Inch Macbook Pro complete with the Lion since October 2011. I've been having trouble with the internet connection. I keep getting 'unable to connect to the internet' or 'website unavaiable'. We have a brand new router, so we know for certain the router isn't going out. Both of my parents computers connect just fine without getting kicked out. I thought maybe it was the seat, so I switched chairs and rooms and positions, but that doesn't seem to help. I check my internet connection and always says 'connected' with full bars. I've tried different browswers, using Safari and Google Chrome. It's frustrating not being able to get online and get kicked off in the middle of whatever you're doing for a reason you can't figure out. Any help/suggestions? It's been going on for a month or so now.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

Is there someone in the St. Louis area I can get to help me with a new router

I have to install a new router for my Apple 10.7.4. Is there someone in the St Louis MO area I can get to help me with this?

Hi Robert, perhaps we can help you here, what is the question(s)?

Wireless Profile Certificate Embed with SOE image

Guys, i need help on this issue. Our company has all the Cisco Wireless AP. i would like to know if i want to Embed Wireless Profile and tag with every new PC/Laptop with the SOE image. What should i need to do ? anything that i need to buy for this ?
Do we need to set up another CA server ? why we need that ?
The main purpose is for us to easy maintain the wireless profile. so that we no need to manually key in the wireless setup. so, whenever a fresh installation of the PC/Laptop, it will automatic connect to the company wireless network through the certificate. can you please guide me on this ? as my company engineer seems not sure how to do. i just join to this company and thinking of implement this project.
Thanks for the help.

I have moved this over this thread from Small Business Wireless to the correct area. Ryan, I also noticed that you have reposted too. As a reference here is your new post for other people to follow: https://supportforums.cisco.com/message/3514621#3514621
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

Will Airport Express 802.11g network with a new Dual Band Airport Extreme?

Bob Timmons I need your help. I have a older Airport Express, can I use it to extend my wireless network to the far reaches of my house by linking it to my new Airport Extreme 802.11n?
There must be an article on this somewhere.
Thanks!

Welcome back!
If by "older" AirPort Express, you mean it is a "b/g" version, you'll have to use the WDS setup options on both the new AirPort Extreme"n" and the AirPort Express.
Unfortunately, two negative things will occur when you setup WDS:
1) Because WDS is a "g" technology thing, the entire wireless network will drop down to "g" wireless levels. So, you lose any advantages of "n" speeds with your new router.
2) The bandwidth on the entire wireless network will be cut 50%.
Bottom line, you will have a "g" wireless network operating at half of it's capability. That's a tremendous loss of performance for a bit more wireless coverage, but you may disagree.
WDS is difficult for most users to set up because it is very easy to make a mistake. Look over this post to get an idea of what is involved with this. There is also a link to Apple's instructions in this post, but the step by step by expert user Tesserax is easier to follow.
http://discussions.apple.com/thread.jspa?threadID=2287950&tstart=0
I do not recommend WDS, but it's your call.

Will my airport express 802.11d interface with the new 802.11n for music streaming?

I am about tho purchase the new airport express and have the old one running in the house already. The reason for the purchase is to stream music to speakers in the house. The older one is dedicated to the modem and provides wifi, the new ones will be plugged in elsewhere. Should I replace the old one or keep it?

Welcome back!
If by "older" AirPort Express, you mean it is a "b/g" version, you'll have to use the WDS setup options on both the new AirPort Extreme"n" and the AirPort Express.
Unfortunately, two negative things will occur when you setup WDS:
1) Because WDS is a "g" technology thing, the entire wireless network will drop down to "g" wireless levels. So, you lose any advantages of "n" speeds with your new router.
2) The bandwidth on the entire wireless network will be cut 50%.
Bottom line, you will have a "g" wireless network operating at half of it's capability. That's a tremendous loss of performance for a bit more wireless coverage, but you may disagree.
WDS is difficult for most users to set up because it is very easy to make a mistake. Look over this post to get an idea of what is involved with this. There is also a link to Apple's instructions in this post, but the step by step by expert user Tesserax is easier to follow.
http://discussions.apple.com/thread.jspa?threadID=2287950&tstart=0
I do not recommend WDS, but it's your call.

Printer not working with new router

I have a new router and my laptop with Windows XP is working Ok
My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
What can I do

Hi @Jobrig,
Welcome to the HP Forums!
I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue.
This website, HP Wireless Printing Center, may also help.
Hope these guides will help you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Will HH(Black) BB Talk Phone work with the new AD...

Hi
hopefully moving over tomorrow to the new up to 20Mb connection.. question is ..will the HH phone work with the new router that Bt have sent out for the new connection ? Doesn't appear to be anywhere to connect to the new router like the HH which you can connect it to on the front .. so can it connect wirelessly using the power adapter ??

None of the BT HH phones will work with the 2700HGV.
You will need to get a standard wired or wireless phone and connect it to the phone port on the 2700HGV with the included adaptor, then activate BBTalk on the 2700 HGV. Here's the link to the activation help:
http://bt.custhelp.com/cgi-bin/bt.cfg/php/enduser/cci/bt_adp.php?p_sid=z_6Y-FXj&p_faqid=9916&cat_lvl...

Reset HP Officejet Pro for wireless after purchase of new router

I'm working with a Win 7 Pro pc a couple days a week in a small office. A couple days ago they installed a new Linksys router. The PC is set up to wirelessly print on the HP 7520 that I reconfigured, and mobile devices are ok with the new router. HOWEVER, I have tried and tried to reconfigure the older HP Officejet Pro 8000 series for wireless and no dice! I even brought it into the same room and plugged in via USB and still it won't work. The wireless "trouble" report that prints doesn't even show an IP address (which was one of the tips that was suggested by the Linksys site). I have tried removing the device (three times) so I could reinstall but that didn't even work. (This printer doesn't have a touch screen to set up, like the 7520.)
What can I do? We really need this printer for occasional "high end" printing.
Thank you,

Hi there,
I would recommend plugging in the usb cable again, and running the print and scan doctor.
Please let me know if after running through "fix printing" it gives any errors?
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Hp Photosmart not working with new router

My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

@Ann99, welcome to the forums
I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
I have some questions and some things for you to try.
1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
2. What did tech support determine the issue was when you called them?
3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
The Printer Is Not Found During a Wireless Network Installation
4. What Operating System are you running on your computer?
5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
Please let me know all of the information and results from your troubleshooting above!
Have a terrific day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Having internet connection problem with a new Actiontec GT794WG

I am currently using Westell 327w which works completely fine. Its internet light comes on after few seconds the DSL light becomes solid. I am trying to change it to GT794WG, because I have been using 327w about 4 years.
By the way, I am having a connection difficulty with my new GT794WG modem.
Although I connect every necessary cables such as DSL, Ethernet cables and turn it on, an internet light on the modem does not flash. There is no problem with DSL light. It becomes solid after few blinking. Only problem is the internet light. I know that it refers that the modem can not connect with the internet.
I don't understand why the new modem can't connect to the internet which my old modem can?
Can anyone help me solve this problem?

Ok.
#1 For your info, there a certain amount of time that you can re-edit your post.
A time limit of at least 2 hours.
#2 Why do you want to replace your Westell 327w with the newer router? That is if there is any other reason besides, you have been using it for four years..
Moving along...
#3 In the Westell 327w, go to Configuration -> VC Configuration
#4 There are different settings there, as I saw at
https://docs.google.com/viewer?url=http://www.westell.com/images/pdf/e90_6000_6100_6110_ug.pdf&embed...
on page 46 out of 146 pages.
#5 What is 0 VPI / 35 VCI set to?
#6 Notes:
a) In the manual/user guide (that docs.google.com URL) the connection type is PPPoE.
b) If 0 VPI / 35 VCI is set to Disabled, what ever the enabled for example 0 VPI / 36 VCI.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Disappointed with TCs wireless performance--help!

I have a 1TB Time Capsule which I believe has the same wireless part as the Airport Extreme and my wireless performance and range is surprisingly terrible. Is the Airport Extreme known to have a better wireless characteristic than the Time Capsule? Do you prefer it over the TC?
-When I use "N" only. I cannot connect just two rooms away with my MBP and my iPhone cannot use the signal...
-When I use the N (with B & G compatibility), the range is extended and I can use it in my other bedroom but videos streaming to my Apple TV (full DVD rips or EyeTV recordings) do not play reliably...
Also, I can only connect 3 ethernet devices to my TC... I would like to expand this. Should I use a different router and ethernet switch on the front line and use the TC for NAS an WAP (Wireless Access Point) only? What's your topology and what router do you recommend? I need about 5 ports.... also, if I'm using the TC or Airport as a WAP can I use the switch on that box in addition to the ones on the router?
Thanks,
Robert

The best wireless bandwidth performance available would be to operate the wireless in the 802.11n only (5 GHz) mode with both wide-channels enabled and with the radio channel set in the higher range (channels 149 -165 in the US).
I assume that you don't have the latest simultaneous dual-band version of the TC so in order to maintain that bandwidth, you would need a second AirPort, like an earlier 802.11g Extreme or Express to create a second wireless network for your non-"n" clients.
As you are already aware, the 5 GHz radio does not penetrate through walls as well as the lower frequency 2.4 GHz band nor has the distance.
The bottom line, for best HD (especially 1080p) streaming performance, you would need Gigabit Ethernet.

IPhone5 can only be replaced with the the 5C by Asurion

I have to say that I am really dissapointed in the scam that is being run. I have an IPhone 5 that was in a Lifeproof case but broke when it was dropped accidently. I tried to put a claim in to get the phone replaced and was told that I can pick a white or blue 5C. Apple is no longer supplying them with IPhone5. They are trying to sell it by saying it has a better camera and processor, unfortunatly it looks like a phone for a child. The reviews state that its a cheap phone dressed up in a cute package. So BEWARE if you have an IPhone5 this is what you will get. I work in a large company and have been talking to many of my co-workers that have Verizon (we get an employee discount) an no one was aware that they would end up with this phone. Everyone has started dropping the insurance becasue no one wants a 5C. After looking at my options I will go with Apple Care from now on to aviod this problem.
The iPhone 5C is kinda, sorta, technically a new product -- colorful, cute, with a variety of interchangeable color cases much like the recently released Motorola Moto X -- but under the hood it's really an iPhone 5 with a new paint job, and a cheaper price: $99 on contract (or even less, if you shop around).
To be clear, we loved the iPhone 5 when it first hit in 2012. It met every one of our needs, kept up with the competition, and presented a sweet spot of features: fast LTE wireless, a larger 4-inch screen, plenty of performance tweaks, a faster processor, and a really great camera. All of those features are back with the 5C.
The only new additions to the 5C (versus the old 5) are iOS 7 coming preinstalled, new LTE antennas that work with more international carriers, a better low-light-sensitive front-facing FaceTime HD camera, and a slightly increased internal battery versus last year's model -- better on paper, but not on a magnitude that most people would appreciate.
What the iPhone 5C isn't is a radical "budget" iPhone. It's not the affordable contract-free prepaid device some dreamed of. Instead, it's an iPhone 5 with a candy-colored polycarbonate shell. If you want something more advanced under the hood, the iPhone 5S is what you're looking for; if you want a bigger screen, nearly any Android phone will be a better choice.
http://reviews.cnet.com/iphone-5c/

No I didn't think the would give me the 5s I thought they would give me the phone I insured the 5. That's the phone I paid for not a plastic phone that looks like it's for a little kid. If that phone was the option when I made the purchase in May I would have waited. I just feel like it's how they are getting rid of a phone that most people don't want.
The supervisor and customer service rep agreed that the 5c option is making a lot of people unhappy and they would not want it either.
I am also putting this out there as a buyer beware. If you purchase an IPhone get the Apple care and not the insurance through Verizon. It's cheaper and you will get better service.

My iphone5 wireless performance isnt great with my new router

Similar Messages

Maybe you are looking for