My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

Similar Messages

  • HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

    Hi,
    Any one have this issue?
    HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
    This issue was found in my replacement motherboard. the original mother do not have this issue.
    The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
    Appreciate any one can provide clue for resolving the problem.
    I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50) 

    @wheng 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • HT3204 I was in the process of restoring my ipad and an issue with itunes came up and itunes closed. Now my computer doesn't recognize the ipad as anything so I can't complete the restore process.

    I was in the process of restoring my ipad and an issue came up with itunes and it had to close. I reopened itunes but now my computer doesn't recognize the ipad as anything plugged in to my computer. I am unable to complete the restore process.

    Hi kimbo934,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • Web cam stopped working with Windows 7 (but works fine with Ubuntu Live CD).

    Since two days my web cam stopped working. I am using Windows 7 64 bit and I have a Toshiba L505d S5992. It does not show in Device Manager and Windows Update doesn't recognize it, manually I can not install it, so my best guess it was broken.
    But then I tried the LiveDVD of Ubuntu 10.10 (64 bit) and it recognized immediately my web cam and the blue light came on. I have no clue what happened with Windows 7 but it's getting very frustrating.
    Any help would be very welcome at this point.

    Download the webcam application for your unit from this website.
    Uninstall it on the programs and features then installed the downloaded webcam application.
    Hope this will help you solve the issue.

  • PDF files not able to view with mac os but working fine with other browers even i downloaded pdf plugins

    Hi,
    On Apple Mac i am not able to view/open pdf files even i downloaded adobe reader plugins but same thing i can open with help of other browsers like chrome. And with firefox i am getting below message when try to open pdf files.
    "It appears you don't have Adobe Reader or PDF support in this web browser. Click here to download Adobe Reader".
    I want to fix it for my client.
    So please suggest me to fix this.

    When you install or update Adobe Reader, it installs a plugin for viewing PDF files inside Firefox and sets that as the default. The problem is that this plugin does not work. In order to view PDF files again follow these steps
    ''' https://support.mozilla.org/en-US/kb/pdf-files-are-blank-and-cant-be-downloaded-mac '''

  • HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

    My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

    Update: It seems as though the phone will charge if I plug it in and then turn it off.  It will not charge while the phone is on.  Also iTunes will not recognize it, so I can't sync or anything.  I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

  • Superdrive no longer recognizes CD, but works fine with DVD

    my Superdrive seems to have a problem recognizing any type of CD media, but works fine with DVD media.
    I reinstalled Leopard and still the same problem. I also zapped the NVRAM (this is an Intel 2.0 Ghz Mac Mini w/ 2 GB Ram.
    Is there anything else I can do or do I just need to replace the drive?

    Typically when this sort of symptom appears, it relates to a hardware failure, either due to a faulty lens, or dirt. You might try a lens cleaner to ensure it is not the latter.
    Since this is a 2.0GHz mini, it ought to be still under warranty - if that is the case it would be wise to have Apple, or an approved service provider, check it and undertake any necessary repairs.

  • Computer doesn't recognize my iphone 4 but iphone is charging

    I have a Iphone4
    but when calling the micro sometimes stops working, so the other person doesn't hear me any more.
    I wanted to connect to itunes but
    when i connect to a computer (tried a couple pc's and a mac)
    the phone is charging, but my computer doesn't find the iphone (doesn't show up in My Computer).
    This used to work before,
    and when i plug in my old iphone the computer finds it without a problem.
    I removed itunes and installed it again.
    I did the resets (7 sec and 20 sec) but nothing seems to work!
    What to do?

    Type "iphone not recognized" or similar into the search bar at the top of this page by "Support"

  • HT201250 My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1

    My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1
    I have tried everything, even buy new external disk from different manufacture.
    If I cant get a fix soon, I am downgrading back to SnowL.

    Still no luck. I tried all the tricks, reconfiguring TM (remove selected disk option, and re-setting it, and trying different disks). Tried new combo updater, and the newer TM update after that. Tired two different disks too (one is my older firewire WD MyBook 1TB, and my brand new 3tb Seagate GoFlex USB... either one plugged into back of computer - no intermediary devices). I did get the TM buddy wiget and it produced the following log, from the last attempt, where I setup lots of exclusions so that backup quantity was small (under 10gb). Still it failed to complete. Here is that log, for what it is worth:
    Starting standard backup
    Backing up to: /Volumes/TM-Disk/Backups.backupdb
    9.56 GB required (including padding), 911.15 GB available
    Waiting for index to be ready (101)
    Copied 0 files (0 bytes) from volume Mac HD.
    Backup canceled.
    To prove a point, I will take these disks are run them on my other Tiger and Snow Leopard laptops to prove TM works fine on those with these disks. But I fear the only options are to either have my tech re-install LION... or just have him reinstall SL instead. Im at wits end.

  • My computer doesn't recognize my iphone - i plug it in to sync it but it doesn't popup in  itunes

    my computer doesn't recognize my iphone - i plug it in to sync it but it's icon doesn't popup in  itunes - what's wrong?

    this is weird, but it ususally works for me: try blowing in both ends of your usb plug to make sure theres not any dust lurking there. do the same to the baottom of your iphone where you plug the cord into. its not a techy kind of solution but it works for me and my friends.

  • PROBLEM with 24/96 bit-rate USB DAC that worked fine until I plugged in two

    I'm using a late 2008 15" Macbook Pro that I bought Jan 2009 right before the SD card models came out. Mac OSX 10.6.4 and iTunes 9.2 are installed. I have a Nuforce Icon HDP and a CEntrance DACport 24/96 bit-rate USB DAC (external sound cards) that still work great right now. Note - 16 bit/44 Khz is CD quality, and these 24/96 files are hi-resolution downloads that are closer to SACD or DVD audio.
    I have been evaluating a new third 24/96 USB DAC plugged directly into the Macbook USB port (no hub) which has been working fine for over 2 weeks with 24/96 bit-rate lossless music files in iTunes. Audio Midi Setup is set for 24/96 to match the music file's resolution. After making suggestions to the manufacturer they made some improvements and sent me a new version to listen for the differences.
    I listened to the new one for a day and it worked fine, but when I plugged in the original test sample into the second USB port at the same time as the new one in order to compare them, the sound became garbled and noisy. This never happened when either one was plugged in by itself. Note, if I make changes to the DAC's bit-rate in Audio Midi Setup I usually close iTunes first and then re-open it when I am done.
    Upon hearing this new problem I unplugged both of the new USB DACs and plugged just one of them back in, but now it causes iTunes music playback to pause when one is plugged in and set for 24/96 in audio midi setup. Prior to plugging in both at the same time, either one worked just fine by itself. There is no reason when unplugging one or the other that they shouldn't start working again. But now I can't play any 24/96 music through either one anymore. In quicktime player the songs don't pause like with iTunes, but there is no sound coming through even with just one DAC plugged in at a time. Then I discovered that if I go into Audio Midi Setup application and lower the bit rate to 24/48 then iTunes will resume playing again and I can hear the music fine with iTunes or Quicktime player.
    Basically, my Macbook Pro has now lost the ability to play 24/96 bit rate with either of these new USB DACs, when they both worked fine before I plugged them in at the same time. More confusing is that they use the same USB receiver chip as in one of the DACs that I mentioned above in the first paragraph, and both the HDP and DACport still work fine at 24/96 bit-rate. It's only these two new USB DAC that require me to lower the bit rate in Audio Midi Setup to 24/48 in order to listen through them, and this wasn't a problem as recently as yesterday!
    The computer is acting like some setting needs to be wiped out - it's DEFINITELY NOT the USB DAC's that are faulty because they still both work fine at 24/96 on my wife's iMac (I'm afraid to try plugging in both at the same time to the iMac in case I screw that Mac up too).
    I have reset the PRAM a few times, and this doesn't fix the problem. I thought maybe the com.apple.audiomidisetup.plist file could be corrupted and deleted it, but that didn't help. I don't know what to try next to get the Macbook to start fresh when trying to use these devices, short of having to re-install OSX.
    Please, does anyone have a suggestion of how I can make the Macbook forget it ever saw these two USB DACs, and let me start fresh so they start working normally again? I do dozens of reviews for Head-fi.org and I can't afford to have my Macbook Pro compromised like this, which could prevent me from doing some reviews or evaluating new products.

    UPDATE:
    As noted in the first post, both of these newer USB DAC work fine at 24/96 on my wife's iMac, so it's clear that they didn't both become defective when I connected them to the Macbook Pro at the same time.
    Resetting the Macbook Pro PRAM didn't help, so I removed the hard shell laptop case to get to the battery and remove it, then reset the SMC. After that I could use the original DAC at 24/96 again, but only IF it was plugged into the rear USB port. If I plugged it into the front USB port then the sound was garbled and filled with noise. This was a vast improvement over no sound at all.
    Then I switched to the replacement/updated DAC, but I got no sound at all from either USB port at any bit-rate. And returning to the original DAC again now results in no sound again.
    Sigh... I will reset the PRAM and SMC again, and see how far I can get with this. I'd still love some help. Thanks!

  • JRE7 throws exception Can't create cache file but work fine with JRE6

    I am using J-free chart for rendering charts. My application is work fine with JRE6 but while using JRE7 i am getting following exception
    Caused by: javax.imageio.IIOException: Can't create cache file!
         at javax.imageio.ImageIO.createImageOutputStream(Unknown Source)
         ... 18 more
    Caused by: java.io.IOException: The system cannot find the path specified
         at java.io.WinNTFileSystem.createFileExclusively(Native Method)
         at java.io.File.createTempFile(Unknown Source)
         at javax.imageio.stream.FileCacheImageOutputStream.<init>(Unknown Source)
         at com.sun.imageio.spi.OutputStreamImageOutputStreamSpi.createOutputStreamInstance(Unknown Source)
         ... 19 more

    I was not able to reproduce this with Java 7u3 (32bit) on a Windows 7 (32bit).
    What specific version of Java were you using at the time of error?
    - ShakR

  • Strange behaviour of HDMI: with most tv's works fine, with LG I get video, but no sound.

    HP dv6 with an ATI HD 5650.  With most Tv's ,the notebooks works great when connected trhough HDMI.  But with my LG tv, I dont get sound (video is perfect).  Same LG tv works perfect with other notebooks.  I have tried different cables, reinstalling drivers, and of course configuring Playback to HDMI as default.  I have spent hours with HP support but they think its a compatibility issue.  

    I have done the changes. The DVD in PAL format works (video and audio).
    However, in my opinion a user should get a warning about the standard discrepancies when iDVD starts and not wait until a burn process starts. Moreover, I think iDVD should not lose any information by the import of iMovie projects depending on the project settings (preferences), since a user can always switch between PAL and NTSC.
    Anyway, thanks so much for your help!
    Juergen

  • Getting SqlException while using TABLE CAST but works fine with order by

    I am using following query as sub-query with in a query which I have used in PL/SQL. This sub-query works fine If I add Order by x1,x2 at the end of the query. Otherwise it gives a SQLException.
    SELECT x1,x2 FROM TABLE( CAST (somelist AS X_ARRAY ))

    Narendra,
    If this question is related to HTML DB, please provide complete context, and show the exact text of error messages and the query itself.
    Scott

  • Hp 3510 prints only blank pages from i-pad, but works fine with xp configured lap top. why? help!

    i have an hp3510 wireless printer that worked fine with both my i-pad and on my laptop when 1st installed.  now it will only print blank pages with the i-pad although it still works fine when using my xp configured laptop.  can anyone tell me how to correct the i-pad problem so that i can print wirelessly using that device?
    thanks!
    This question was solved.
    View Solution.

    I would start by powering down the Apple device, make sure that you hold the power button down, and slide the bar on the screen to "Off". If you have more that 1 iOS device that you use with the printer (like another iPad or an iPhone) power them down at the same time. Then turn them all back on and try to print to the printer.
    If still having a problem, I would then power down the printer, router, and Apple device.
    1. Unplug the router, (most do not have an on/off button)
    2. power down printer and Apple device
    3. Wait about 20-30 seconds
    4. Plug router back in and wait for it to be fully operational and all the light on it back as they were before unplugging it.
    5.Power printer and apple device back on (check to settings of iPad to make sure that it is still on the same network as printer and that "Ask to join other networks" is ON).
    6. Reattempt to print
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

Maybe you are looking for