My iphoto has stopped working for no reason

I did a clean up on my macbook. Some reason, it affected iphoto, but I did not delete anything that was involving with iphoto! I have tried every cd I have got to set it up again, but no use When I open iphoto, a white wheel whose lines are going round round and round, as it is loading up, but no use again! It has all of my pictures in it..my photos are on the computer thankfully!
Any suggestions?
Much appreciated

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Similar Messages

I cant get a photo project to email the moblile me address to someone else. I know how, but it has stopped working for some reason. Instead of pulling up the web address on the email form, it puts an error message? Any ideas?

I cant get a photo project to email the moblile me address to someone else. I know how, but it has stopped working for some reason. Instead of pulling up the web address on the email form, it puts an error message? Any ideas?

Michael,
The link for the word 'HERE' directs to a Evergreen School District page, which outside of Mobile Me and/or Aperture. Your school district network might be intercepting the request from Aperture and displaying the 'network authentication page' that you see, instead of the email. I would get with the IT department to see if they can help you get around this.
Have you also tried using the 'Tell a Friend' feature from another network location, like starbucks or your home?
Cheers,
Owen.

Personal Hot-spot has stopped working for no reason

I had a perfectly functional Person Hotspot (data tethering) feature with my Vodafone UK connection, and the data tethering plan I had enrolled proved more economical than those regular USB dongles. Recently, I upgraded my vodafone plan to allow for a higher usage - and somehow the person Hotspot just stopped working. Every time I navigate to the Personal Hotspot Button, the tab - which used to read 'Enable Personal Hotspot ON/OFF' - now reads 'Setup Personal Hotspot'. When I click on the link, it directs me to a Vodafone Iphone Advertisement page.
I contacted Vodafone officials, even personally visited their store and got a confirmation that the data tethering plan is active, and there should be no problem with my iphone's data tethering capability. The best advise they could suggest was to backup and restore the Iphone using Itunes. Well - I tried that as well, and still the problem persists.
Has anyone faced this problem before? Can anyone help - where exactly can I reset the Hotspot settings, or even enter it manually to get it working? I've tried backup and restore, reset cellular data network, Disable and re-enable 3G, ejecting and re-inserting Vodafone SIM........ The hotspot was a wonderful feature, would love to get it back.........!!
Thanks!

Thanks Dodie. My personal hotspot just stopped working. I use it all the time and it was driving me crazy having to connect via usb.
I have used the reset before and forgot all about it.
Simple fix, get it got it, good !

My iphone 5s screen has stopped working for no reason at all? how can i fix this?

I was using it fine then locked it and tried to use it 5 minutes later and it stopped working? any ways to fix this or do i have to go onto an apple store?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

My Hotmail watcher has stopped working for the past week or so. I've uninstalled and reinstalled it several different times, but it did not help

My Hotmail watcher has stopped working for the past week or so. I've uninstalled and reinstalled it several different times, but it did not help

Hi,
It appears that the developer has released a newer version of Hotmail Watcher. Version 2.13 located at https://sites.google.com/site/sonthakit/hotmailwatcher. You should try updating it to see if it works then.
From https://addons.mozilla.org/en-us/firefox/addon/hotmail-watcher/<br>
'''IMPORTANT -- I had changed my add-on to self-host. New version had been released at my site. Please install new version'''

My camera on my iPad 2 has stopped working for the second time.

My camera on my iPad.2 has stopped working for the 2nd time. Last time it just started working again after a couple of months.
I have tried closing the camera app completely & also re-booting the iPad completely but to no avail.
Any ideas anyone?

You'll first need to have iTunes on your computer - from the summary page (the one that opens when you select the iPad in iTunes) it'll give you options for backing up and restoring it. On that page just select 'restore iPad' and that'll get it started.
Hope it's just software then, those out-of-warranty replacements can get pricey.

Qosmio X500: power adapter stopped working for no reason

Hi,
Now i have my Qosmio X500 for a year and i like it, however i have small problems with it, and i would like to know if it can be problematic.
The first thing is that my power adapter stopped working for no reason,
So i bought a new one, but it always made some noise when the laptop was fully charged.
I know people with the same laptop and their adapter didn't make that sizzling noise, it looks like it was already defect from the begin.
Then i have one dead pixel in the middle of my screen, no problem for me.
Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...
Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
So all those problems i have annoy me, especially the last one (webcam and speakers problem), can this fit in the warranty of the laptop? I did extend the warranty for one year...
Thanks in advance.

> The first thing is that my power adapter stopped working for no reason,
> So i bought a new one, but it always made some noise when the laptop was fully charged.
I think this is AC adaptor fault maybe a broken cable or something like that I would recommend you to replace this get in contact with the dealer and ask for the new one.
> Then i have one dead pixel in the middle of my screen, no problem for me.
I found a info about such issues:
+Information on screen technology and pixel failure tolerance for LCD displays
+http://aps2.toshiba-tro.de/kb0/TSB9502LZ0000R02.htm
> Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
Maybe you should ask Toshiba notebook technicians for a check maybe some screws or the hinges are loose.
The speakers should be checked with connected headphones. If you will not notice the same crackling sound using headphones, then the issue might be related to speakers

Can any one find a solution to this problem [ID CC 2014 has stopped working] for this file{link included}

Hi all,
Can any one find a solution to this problem [ID CC 2014 has stopped working] for this file{Dropbox - Questions CH-5 .indd}
Note: I could open it, but suddenly I have faced this issue with just this file no any other of my files.
Thanks for your help.

try the blind export to .idml script at Adobe Community: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.

Gtx 970,,Stopped working for no reason

Hi,,
Im from Oman It is a country in the Middle East
I own GTX 970 GAMING
,,, I used it for several weeks and then stopped working for no reason.I talked to the agent in the Middle East.And they told me they do not take VGAs or MBs...And They told me that i have 2 speak with the Global....I called the Headquarters (Address: No. 69, Lide St., Zhonghe Dist., New Taipei City 235, Taiwan
Tel: +886-2-3234-5599 (REP))
And they ask me for my email and i gave them.. Then thay say that the service Center will contact me...
Now its Happend From 3 days and no one Contect me...

check emails in your "SPAM" folder maybe the message is there
else have a ask them again
optional: >>How to contact MSI.<<

Keep getting error installation helper has stopped working for readstep2

keep getting error installation helper has stopped working for readstep2

attach a screenshot of that error message, FAQ: How do I capture and post a screen shot or... | Adobe Community

I receive the error Photoshop cs6 has stopped working for windows 7 32 bit

I downloaded and installed cs6 for windows 7 32 bit and cant open it to use,i get the message" adobe photoshop cs6 has stopped working" I have tried different graphics drivers but still the same. My other adobe softaware works fine,IE: elements11 and lightroom4. Any ideas?

Did you receive any error messages during the installation process? You can check your installation log files to look for errors. Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to locate and interpret the installation log files.

Licensing has stopped working for Acrobat 9 Pro

When I install Acrobat 9 Pro on my new Macbook 10.7.4, I get the message "licensing for this product has stopped working" and it tells me to uninstall and reinstall. When I first purchased Acrobat 9 Pro and installed it on my old Macbook Air, I had the same problem but I was able to fix it with one of the solutions at http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html.
However, none of these solutions work or make sense on my Mac version 10.7.4. I have already been on live chat with Adobe help twice and was unable to resolve the problem. Any help would be greatly appreciated! (I also have CS5 Premium installed and it works fine).

I have been having the licensing issue with Windows 8. I have run the licensing repair tool every few weeks. It never "sticks". Acrobat will work fine for a few weeks, maybe a month, then the error comes back. Does anyone know of a permament fix. Thanks.

Cant find i i life after installing it and iphoto has stopped working

cant find i i life after installing it and iphoto has stopped working

If it is a new Mac then iLife came preinstalled on it
As to searching for iLife - it is not an application - it is a suite of five applications - iPhoto - iMovie - IDVD - iWeb - Garage Band -- http://store.apple.com/us/product/MC623Z/A/iLife-11?fnode=NDQ5MDg0MA&mco=MjA4Nzk 4OTQ
Do you have these five applications in your applications folder?
what happens when you launch them?
LN

JTable.changeSelection() has stopped working for me in Java 1.5

The application I'm working on has a search function for a large table of data. In addition, you can restrict the search to a selected area of the table. This worked fine when compiled on Java 1.4, but has stopped working on Java 1.5. It appears the problem is with changeSelection not actually changing the selection to the cell that was found in the search.
I've been able to reproduce the problem with some small modifications to the SimpleTableSelectionDemo.java tutorial program. I've included the code below with my changes.
Basically all I did was modify the mouseListener so that instead of printing the table contents, it calls changeSelection to a fixed location (simulating the search going to a matching cell).
If I compile/run in 1.4, I can select a cell or region, right-click the mouse and see the specified cell selected. If I start typing the selected cell is edited.
If I compile/run in 1.5, when I right-click the selected cell is not changed (the second selected cell of the select region stays selected). If I start typing the wrong cell is edited.
Hopefully someone can tell me if this is a run-time bug, or a change in behavior (and what I need to do to get it working again in 1.5).
* SimpleTableSelectionDemo.java is a 1.4 application that requires no other files.
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JComponent;
import javax.swing.ListSelectionModel;
import javax.swing.event.ListSelectionEvent;
import javax.swing.event.ListSelectionListener;
import java.awt.Dimension;
import java.awt.GridLayout;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
* SimpleTableSelectionDemo is just like SimpleTableDemo,
* except that it detects selections, printing information
* about the current selection to standard output.
public class SimpleTableSelectionDemo extends JPanel {
    private boolean DEBUG = true;
    private boolean ALLOW_COLUMN_SELECTION = true;
    private boolean ALLOW_ROW_SELECTION = true;
    public SimpleTableSelectionDemo() {
        super(new GridLayout(1,0));
        final String[] columnNames = {"First Name",
                                      "Last Name",
                                      "Sport",
                                      "# of Years",
                                      "Vegetarian"};
        final Object[][] data = {
            {"Mary", "Campione",
             "Snowboarding", new Integer(5), new Boolean(false)},
            {"Alison", "Huml",
             "Rowing", new Integer(3), new Boolean(true)},
            {"Kathy", "Walrath",
             "Knitting", new Integer(2), new Boolean(false)},
            {"Sharon", "Zakhour",
             "Speed reading", new Integer(20), new Boolean(true)},
            {"Philip", "Milne",
             "Pool", new Integer(10), new Boolean(false)}
        final JTable table = new JTable(data, columnNames);
        table.setPreferredScrollableViewportSize(new Dimension(500, 70));
        table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
        if (ALLOW_ROW_SELECTION) { // true by default
            ListSelectionModel rowSM = table.getSelectionModel();
            rowSM.addListSelectionListener(new ListSelectionListener() {
                public void valueChanged(ListSelectionEvent e) {
                    //Ignore extra messages.
                    if (e.getValueIsAdjusting()) return;
                    ListSelectionModel lsm = (ListSelectionModel)e.getSource();
                    if (lsm.isSelectionEmpty()) {
                        System.out.println("No rows are selected.");
                    } else {
                        int selectedRow = lsm.getMinSelectionIndex();
                        System.out.println("Row " + selectedRow
                                           + " is now selected.");
        } else {
            table.setRowSelectionAllowed(false);
        if (ALLOW_COLUMN_SELECTION) { // false by default
            if (ALLOW_ROW_SELECTION) {
                //We allow both row and column selection, which
                //implies that we *really* want to allow individual
                //cell selection.
                table.setCellSelectionEnabled(true);
            table.setColumnSelectionAllowed(true);
            ListSelectionModel colSM =
                table.getColumnModel().getSelectionModel();
            colSM.addListSelectionListener(new ListSelectionListener() {
                public void valueChanged(ListSelectionEvent e) {
                    //Ignore extra messages.
                    if (e.getValueIsAdjusting()) return;
                    ListSelectionModel lsm = (ListSelectionModel)e.getSource();
                    if (lsm.isSelectionEmpty()) {
                        System.out.println("No columns are selected.");
                    } else {
                        int selectedCol = lsm.getMinSelectionIndex();
                        System.out.println("Column " + selectedCol
                                           + " is now selected.");
        if (DEBUG) {
            table.addMouseListener(new MouseAdapter() {
                public void mouseClicked(MouseEvent e) {
//                  printDebugData(table);
// ==============================================
// Changed to do a changeSelection() on a right-click
// without clearing any existing selected area.
                    if (e.getButton() == MouseEvent.BUTTON3) {
                        System.out.println("mouse clicked");
                        table.changeSelection(2, 3, true, true);
// ==============================================
        //Create the scroll pane and add the table to it.
        JScrollPane scrollPane = new JScrollPane(table);
        //Add the scroll pane to this panel.
        add(scrollPane);
    private void printDebugData(JTable table) {
        int numRows = table.getRowCount();
        int numCols = table.getColumnCount();
        javax.swing.table.TableModel model = table.getModel();
        System.out.println("Value of data: ");
        for (int i=0; i < numRows; i++) {
            System.out.print("    row " + i + ":");
            for (int j=0; j < numCols; j++) {
                System.out.print(" " + model.getValueAt(i, j));
            System.out.println();
        System.out.println("--------------------------");
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        //Create and set up the window.
        JFrame frame = new JFrame("SimpleTableSelectionDemo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        SimpleTableSelectionDemo newContentPane = new SimpleTableSelectionDemo();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}

Running on Mac OS X 10.4.3
java version "1.5.0_02"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_02-56)
Java HotSpot(TM) Client VM (build 1.5.0_02-36, mixed mode, sharing)
The same problem occurs here.

PProHeadless.exe has stopped working for Premiere Pro CS6

I have had no problems with it until today.
The video I was trying to produce was about 31 minutes long.
I have had this PC less than a year and have never had PProHeadless.exe stop working for Premiere Pro CS6.
what causes this to happen, has the last batch of updates caused this?
PC specs:
Windows 7 64bit fully updated
MoBo Asus P6X58E-WS
i7 quad core 950
24 gigs of Ram
10,000 rpm's Hard Drives
very few things installed on this PC to avoid application conflicts, and I had no other applications running.
Thanks for any input,
Best regards,
Tony

Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
PProHeadless
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

My iphoto has stopped working for no reason

Similar Messages

Maybe you are looking for