My IPhoto is not supported on my architecture?
My Iphoto is not supported on my architecture? What I do?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
Similar Messages
-
IPhoto - "not supported on this architecture" after leopard install
after upgrading to leopard it seems to have deleted my iPhoto all together and when I click what is left of the application I get a window alerting me that iPhoto - "not supported on this architecture" How can I restore?
What version of iPhoto is it?
Did you do an Upgrade or Erase Install?
Have you tried re-installing iPhoto? To do this, go first to HD/Library/Receipts and remove any pkg file there with iPhoto in the name. Then re-install iPhoto from either an iLife disk or System Restore disks that came with your computer.
Regards
TD -
a pop up says "it cannot be open b/c it's not supported on this architecture." Why? It worked fine until now.
What can I do so that I can open iphoto. I have so many photos in the application.To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
IM HAVING TROUBLE DOWNLOADING THINGS ON MY MY MAC G5. EVERYTIME I TRY TO DOWNLOAD SOMETHING A SCREEN POPS UP SAYING "CANNOT OPEN APPLICATION BECAUSE IT IS NOT SUPPORTED BY THIS ARCHITECTURE" SOMEONE PLEASE HELP
CS5 only runs on Intel Macs...
http://www.adobe.com/products/photoshop/tech-specs.html
Some parts of FCE 4 require an Intel Mac...
http://www.specrequirements.com/software/final-cut-express-4-system-requirements -
I have a Mac PowerPC G5 and i just installed the Version 10.5.4 to be able to install Virtual DjLE , and after I installed it, i try to open it and there was an error msg saying : " you can't open the application virtual dj le because it is not supported on this architecture"
What can I do to resolve this? ... Can someone help me with this?? ..
Thank you for your help!Hi, we're out of luck...
MAC SYSTEM REQUIREMENTS
MINIMUM system requirements:
Intel® processor
Mac OS X v10.5.x
1024x768 resolution
CoreAudio compatible soundcard
1024MB RAM
50MB free on the hard drive
RECOMENDED system requirements:
Intel® processor
Mac OS X v10.6.x
1440x900 resolution
Multi-channel CoreAudio compatible soundcard
2048MB (2Gb) RAM
200MB free on the hard drive
Additional requirements for Video mixing:
ATI™ or NVIDIA® video chipset w/256MB of Dedicated DDR3 RAM
Video must support dual-screen output
Supported Operating System and Processor Platforms:
MINIMUM: Mac OS X v10.5 Leapord on Intel processor platform
RECOMMENDED: Mac OS X v10.6.x Snow Leapord on Intel processor platform
Apple® Mac OS X 10.4.x Tiger or older are not supported
Motorola® (PowerBook® G4) processor platform or older are not supported
http://www.virtualdj.com/products/virtualdj/index.html
Might see if the still have version 6.x here...
http://www.virtualdj.com/download/updates.html -
I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.
-
I had 3.6 & the website said new Firefox, need OSX 10.5 or above. Now the icon in the dock has a white circle w/slash like do not enter & when I click on it, a box opens that says,"You cannot open the app Firefox because it is not supported on this architecture."
How can I get my Firefox back without losing all my info on my previous version?The latest version for PPC users is 3.6.25 available at http://www.mozilla.com/en-US/firefox/all-older.html
-
A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8. After what appears to be a successful installati
on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
architecture" comes up". Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
ation" when launching afterwards. The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
Following this I am told to run the CS4 Cleanup Utility. I restart the computer each and every time after running each of the utili
ties. Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
r. When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
n CS4" because it is not supported on this architecture" comes up". Followed KB404711 article and no success. What else can be don
e to fix this issue?
This morning contacted Adobe Support regarding this response:
After having a detailed reserach on your issue i acme to the conclusion
that the problem you are having is not related to Adobe software but its
in fact related to your MAC version ( OSX-5.8). While reseraching your
issue i came across
to many forums where a lot of postings were about the similar error but
with different products the only comon thing was all the Errors were
with Mac machine , also when you check the system requirements for
Adobe Indesign Cs4
by going to the following link
http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE you
will find the Mac OS version supported are from Mac OS X
v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
to advise to you to either contact your system manufacturer or upgrade
to Snow Leopard ( mac os x 10.6)
I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response. In the meantime I decided to see what the Support Forums can do for me. Until then I am down. Thanks for the help.In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
I've un-installed and installed again - still the same.
Even downloaded the dmg again and done thwe whole thing over again. -
I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
My computer is not allowing me to utilize any version of Firefox, after multiple downloading attempts. I simply get a message that Firefox is not supported on this architecture, and the Firefox icon in my toolbar now has a circle on it with a line through it (Canceled). I hope that someone can explain what I need to do to be able to use Firefox once again. Thank you, TC
As you have a PPC or Power Mac the last release form Mozilla to work on PPC is Firefox 3.6.*
Firefox 3.6.23 can be found at http://www.mozilla.com/en-US/firefox/all-older.html
Since you have a PPC Mac there is this third-party option for Firefox 7.0.1 at
http://www.floodgap.com/software/tenfourfox/
As of Firefox 4.0, a '''Intel''' Mac with OSX 10.5+ is required for Firefox builds from Mozilla. http://www.mozilla.org/en-US/firefox/7.0.1/system-requirements/ -
I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
Firefox can't open the application "because it is not supported on this architecture
"You cannot open the application "Firefox" because it is not supported on this architecture."
Thanks for the link to the system requirements, edmeister. However, my system appears to fit every requirements listed, but still gives the same error message.
Here is what my system profiler tells me about my Imac:
Mac OS X v. 10.5.8
Processor: 2 GHz Intel Core 2 Duo, which Wikipedia tells me is "x86" processor
3 GB 667 MHz DDR2 SDRAM
My Activity Monitor says:
1.87 GB of my system memory free
303 GB of hard disk space free
Is there some explanation why I am being told Firefox 4 is not being supported on this architecture? -
what do i do if i receive this message while trying to instal skype, etc
You can't open the application "Skype.app" because it is not supported on this architecture. This also occur while trying to instal some other....Hello,
This would indicate your trying to install a version for the Mac which require the Intel processor. (MacBook)
You need to install Skype for PPC Mac -
tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody. -
Been using Firefox (many years) version 3.16.. Received invitation to download Firefox version 4 for Mac this morning and did so (regretably losing 3.16 version) because now the new version 4 won't open. I just keep getting the error message "You can't open the application "Firefox.app" because it is not supported by this architecture." I'm using the latest Mac OS 10.5.8. The processor is 1.8 GHz Power PC G5.
I trashed the first download and downloaded a 2nd Firefox version 4 and had the same results.Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com
Maybe you are looking for
-
I am getting the following error while opening a BPEL Component in JDeveloper 11.1.1.6. Error below: Uncaught exception java.lang.NoClassDefFoundError: oracle/tip/tools/ide/bpel/v1/plugins/plugins/monitor/xbean/model/Counter j.lang.Class.getDeclaredM
-
Printing problem from rich text email
We're using Acrobat Pro 9.0, Windows XPSP3 and Office 2003SP3. This has also been tested with Office 2007 with the same results. The issue comes when a user receives an email that is in rich text format and has more than one PDF attached. The user wi
-
Has anyone else noticed a remarkable increase in use of the fan for Os X Lion on the MacBook Air?
..Basically the fan almost never came on before, now it seems to run continuously an dthe body feels hotter. I noticed this from Day 1 of using Lion!
-
CF8 not interpreting time in an Oracle date
In testing for my co's migration from CF6 to CF8, found an odd behavior in CF8. The Data coming from the Oracle (9) table, which is of datatype Date, is 7/13/2009 3:31:30 PM. I'm outputting this value as #dateFormat(qry.date, 'mm/dd/yy')# #timeFor
-
Text of Std. Text Key in Routing operation
Hi friends, I am facing a problem in the operation in Routing. I have defined a standard text key in CA10. If I assign the standard key in the Default tab in Work center and select the Work center in routing against the particular operation, the std.