My iphoto is opening but then it has that gray spinning wheel and nothing ever changes?

so my iphoto opens, but then the gray wheel just keeps spinning and the rest of the application never loads. would it b best to just reistall iphoto?

What version of iPhoto? Assuming it's 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Similar Messages

  • Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

    Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

    I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
    The same thing happens in chrome and firefox but safari on my iPad works just fine.
    I have the latest version of everything
    I assume there is a system problem but cleaning up permissions does not help

  • My Macbook has died. Mail and Firefox wouldn't boot up today and so I turned it off at the button. Now I've just got a spinning wheel and nothing works. In the middle of doing a magazine too, altho I did some backup on a stick.  Any suggestions?

    My Macbook has died. Mail and Firefox wouldn’t boot up today and so I turned it off at the button. Now I’ve just got a spinning wheel and nothing works. In the middle of doing a magazine too, altho I did some backup on a stick.
    Any suggestions?

    Try rebooting while holding down the Command and R keys (two keys).
    If you see an icon for Recovery, select it and continue.
    Then select Disk Utiltiy and press Return.
    Now select the hard drive and the Repair Disk.
    Quit DU when that is done and restart.

  • When I open Creative Cloud there is only a thinking wheel and nothing else. I have downloaded it again but still doesn't work. I want Lightroom and it keeps saying I need this to download it.

    I have downloaded it again but still doesn't work. I want Lightroom and it keeps saying I need this to download it.

    1.If internet is fine then this might be becase of Creative cloud files, please try the steps metioned in http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g-cc.html and see if it works.
    2.Please navigate to ~/Library/Application Support/Adobe/OOBE/opm.db and trash it. Try to launch CC desktop and sign in with your Adobe Id (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html) .
    {Note for step 2: The file is in the user Library, not the Applications folder. To see the hidden user Library (not the system Library) in the Finder click on the Gomenu item and then hold down the Alt / Option key. You will see Library appear between Home and Computer. Click onLibrary and then navigate toApplication Support > Adobe > OOBE.
    Alternatively open the Terminal and paste in the following and then press the Enter / Return key:
    rm ~/Library/Application\ Support/Adobe/OOBE/opm.db, This will also delete the file}
    Other related threads:
    http://forums.adobe.com/message/5468864 (spinning blue wheel)
    http://forums.adobe.com/message/5469306
    Hope it works.
    Regards,
    Rajshree

  • Just update Yosemite to 10.2.2 and now LR5 has that dreaded spinning wheel. Takes about 30 seconds for each click of Wacom pen or mouse. Adobe Bridge will not open. Worked fine prior to this update. have the latest LR5 installed and Bridge CC

    Is there some fix for this? this also affects my LR4. PS CC works fine and all other apps.

    It's usually necessary to clean up whats left behind after updating OSX.
    Try trashing the prefs. Start by quitting Lightroom 5.
    Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to Library >> Preferences and clear everything relating to LR5 which usually means deleting the following files:
    com.adobe.Lightroom5.plist
    com.adobe.Lightroom5LSSharedFileList.plist
    Then re-launch Lightroom.
    Also look for the corresponding files for LR4 and Bridge plist files.

  • IBook G4 appears to start then sticks at spinning wheel and apple screen

    Hello there,
    I have an old G4 laptop. Recently installed Airport Extreme card, started it up, no worries! Then was prompted to download updated software from Apple. Did so. But then when I tried to restart it all I get is the Apple chime, then the screen with the spinning wheel and apple logo. The startup does not continue from there. It just keeps on spinnin'. I have tried reboot, restart commands, battery out, battery in. The cord and battery appear fine, but just can't back into my Mac.
    I'd appreciate any tips please.
    Thanks,
    Kurt

    Have you tried to SafeBoot on startup, and then see if using Disk Utility's
    'repair disk permissions' on the selected Macintosh HD lists fixes? {The
    safeboot startup takes some time, often that can take many minutes of
    holding the Shift- key down on startup before it goes into login screen...}
    Then see if the computer would restart normally.
    Or, if nothing happens after that, have you tried starting the computer
    up with the OS X Installer disc1 (the boot/install disc) and C -key held
    down until you see it is attempting to load the Installer. Then, choose
    from the menubar from the Installer header (perhaps not first window
    you see on bootup from install disc) and look for the drop-down menu
    with Disk Utility in it. Run it from there, to Repair Disk and also to run
    Repair Disk Permissions. Note any error messages, and also see if
    the SMART status is indicated for the hard drive as Pass/Fail.
    You can choose a Startup Disk from the Installer's drop-down menu,
    for when you are done with Disk Utility, the computer may attempt
    to start from the installed system you are trying to fix.
    There also is an Apple Hardware Test included on the original install
    disc which accompanied the computer when new; it will work as a
    boot volume but requires a different key held on startup to access it.
    Not sure if that key is the Opt key, or another. I seldom use the AHT.
    {If there appears to be issues after attempting the above, you may
    consider removing the AirPort Extreme Card, and try SafeBoot again.}
    In any event...
    Good luck & happy computing!

  • IPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens.  I want to at least access my photos and copy them to an external drive.

    iPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens.  I want to at least access my photos and copy them to an external drive. Anyone have ideas on how to get to them?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • When i try to open iphoto it opens but its just a gray window that has the loading icon

    when i try to open iphoto it opens but its just a gray window that has the loading icon

    What version of iphoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • My CS2 Illustrator goes through all the motions to open but then at the end, nothing happens. It has

    My CS2 Illustrator goes through all the motions to open but then at the end, nothing happens. It has been working well for years, but then out of the blue it just won't open. I reinstalled it and the it still won't open. HELP! I'm under a big art deadline and this is ridiculous. Thanks.

    Or you may try to Move the folder or the Other options
    In the old days, deadlines were dead serious.

  • TS1702 i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. pls help as am frustrat

    i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. it staarted again this evening, pls help as am frustrated. NB- i checked for apps update but all my apps are up-to-date. CT

    Try the usual steps: restart, reset, restore.
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT1414
    If restoring using a backup doesn't help, try restoring the iPhone to factory settings and try for a while with just the Apple-included apps, to make sure it's not an issue with a third-party app. If it still has problems, it may have a hardware problem and will need to be sent to Apple.
    Regards.

  • When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

    when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
    i am using office2007  with windows7 premium home edition.  i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
    it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
    a real PITA.   anyone have any solution for this? Thanks 
    ken yanow

    Hi,
    Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
    Click the Microsoft Office Button, and then click Excel Options.
    Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
    check box in the General area.
    Click OK.
    If the problem cannot resolve, the Run as administrator may selected.
    Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
    Right-click EXCEL.EXE > Properties >
    Compatibility tab.
    Under Privilege Level, uncheck Run this program as an administrator
    check box.
    Best regards.
    William Zhou
    TechNet Community Support

  • The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished.

    The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished. It seems to be a bad contact, it would not be normal for a quality product that should have, he has less than two years of use. Not because of the bad use or crash. Someone with the same problem or can help me? It's really a contact problem? I've done all the procedures recommended by the online support. Thanks.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • I have set up iPhoto 11 so that pictures will be edited in Photoshop elements 11.  I selected the option to edit in another application.  But when I select edit in iPhoto, elements opens but the photo does not open in elements.    What is the problem?

    I have set up iPhoto 11 so that pictures will be edited in Photoshop elements 11.  I selected the option to edit in another application.  But when I select edit in iPhoto, elements opens but the photo does not open in elements.  I'm using a Macbook pro 15 inch with retina display with OS 10.8.4  What is the problem?

    http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/
    It relates to Elements 10, but it's the same for 11.

  • Safari will open but then nothing!

    Hi,
    I went to the apple store because of a problem with the fans coming on really loud and they re installed my operating system using a few cds in the store.
    I came home and everything seemed fine untill I tried to open safari. It opens but none of my bookmark menus are there and when I try to type an address into the window, it lets me type but then does nothing!
    Then when I try to go to the Toolbar at the top of my computer it will not let me click anything! It is very strange. I downloaded firefox and am currently using that, however I really want to figure this out!
    Any help would be appreciated!
    Thanks!
    Powerbook G4 Mac OS X (10.3.5)
    Powerbook G4   Mac OS X (10.3.5)  

    Is there any other place this folder could be?
    •Click on the HD is it there ? Now I think about it that is where Previous System folder should be, been a little while since i did one.
    Also I read your next post and the links and it said safari might now work after an archive and install and you must re install the old version? How do I do that?
    I do not think they say the old version rather update to the lastest ( most recent version for your os). that is correct version os on your spex ->Mac OS X (10.3.5) look under Blue apple about this mac to make sure
    What version is the Blank page Safari, when launched under-> Safari
    About safari:
    Go to the Blue apple -> Software update and run that to see what is available for your os now. Are there any safari updates.
    Run permissions repair before & after uppdates with the Disk Utility do you know how to do that ? Look at Gulliver knowledge base article, I linked to you.
    You are using Firefox now & have your bookmarks good they are not lost!!
    •Again look for "previous system folder" in HD
    •What version is your blank Safari?
    •What is avaliable to download from the software updater
    •Read Gullivers Kbase article, before you update.
    Hope this helps

  • Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected.  At least that happens with my camera.  Good luck.

Maybe you are looking for

  • How do I transfer my iCloud from one iPhone to my new iPhone?

    I had an iPhone and I had it backed up on iCloud. I now have an iPhone on my own plan and I would like to have the pictures from my previous phone to my new phone. Can I transfer my photo stream from my old phone through iCloud to my new phone? If so

  • Is the Idoc no generated in SAP R/3 is same as in SAP XI

    Hi Experts, I have a query about  communication through Idoc. 1. Is the Idoc no generated in sapr/3 is same when we see that idoc in XI? 2. Suppose we have a segment/field of an idoc with a certain number 'XX' in r/3, will it be same when we check th

  • Format Startup Disk without Installion CD

    Hey guys, I'm currently out of town and don't have access to my Mac OS X installation disc and of course I've run into a bit of rough road recently which has lead to me needing to format my startup disk, zeroing out all data. I partitioned my 500G We

  • UCCE 7.5 Domain manager problem

              Hello I need help please! I try to install UCCE 7.5 but when I try to create the Instance I get error of Domain Manager. 0/09/2012 19:03:05 Domain Manager opened 10/09/2012 19:03:07 User: userX(CN=userx Center,OU=dinfuser,OU=xxx,OU=xxxx,OU=

  • How to pass null parameter fields to Crystal JRC

    Post Author: picage CA Forum: Crystal Reports Hi! I'm trying to set some parameter fields to NULL, however when I set the params I get this message: "The types of the parameter field and parameter field current values are not compatible". Isn't this