My iphoto won't load, just the circle going round and round and round

My iPhoto application will not load. Just a gr screen with the revolving circle...

Continued: It's iphoto 10.6.8. I have a MacBookPro 10.6.8. It has worked well up until yesterday. I've got movies, and extensive slide show on there.

Similar Messages

So my Ipod touch hasn't been connecting to computer, or charging for a week or two until i turn it off completely and now i try to reset all content and setting, the circle goes round and round for like hrs(24) and it still does not complete the reset

so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
pls pls pls pls help .
i have tried alot of solutions, but non of them have worked.

Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it.

My imac turns on with start up sound then nothing else just the timer going round

my imac turns on with start up sound then nothing else just the timer going round

Try restarting holding down the SHIFT key. That will do a directory check in Safe mode. It will take longer to start so continue to be patient.
If it starts in Safe mode, then restart normally and see how that goes.

My iPhoto won't load. I click on it and it just keeps showing the spinning wheel like it's loading, but it doesn't. It doesn't even show my albums anymore. What do I do? Should I get the iPhoto '11 and maybe that would work?

I don't know what to do. I've restarted, I've tried redownloading and updating. It's really frustrating and upsetting. If anyone could help it'd be appreciated!!

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If the new library can be created and open without a problem make a temporary, backup copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Iphoto won't load after the Mac 10.8.02

keeps saying fix and I fix and then it says fix and I fix and it closes then tells me to fix.............AGH!!!!!!

You realise that we can't see your machine and haven't a clue what you're talking about, right? You need to explain what the problem is. It also helps if you tell us the version of iPhoto you have and any error messages you get.

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.

u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend!

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

What matters is the version of iPhoto you have on the different machines. Can you tell us what they are, and what exact error message you get.
Regards
TD

HT202358 can't open my iPhoto it says i need the upgrader did that and it still won't open.

can't open my iPhoto it says i need the upgrader did that and it still won't open.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Videos won't load on specific sites using Safari and FireFox. I've cleared the caches, reset Safari, removed and reinstalled Flash player, downloaded newest update.

Videos won't load on specific sites using Safari and FireFox. I've cleared the caches, reset Safari, removed and reinstalled Flash player, downloaded newest update.

Videos won't load on specific sites using Safari and FireFox. I've cleared the caches, reset Safari, removed and reinstalled Flash player, downloaded newest update.

My iphoto won't open after the mac softwareupdate and i can't update i photo it says there is a diffrent apple id ..plz help

my iphoto won't open after the mac softwareupdate and i can't update i photo it says there is a diffrent apple id ..plz help

If you own a copy of iPhoto 'qq Log into the App store usimg the Apple I'd you used to set up the computer and go to updates to update. If you have an older version of iPhoto or purchased a used system then you must purchase iPhoto version 9.5
LN

My macbook pro won't load all the way when I start it up.

Lately, my mac book pro has been slow to use, and the colour wheel pops up often. I shut it down earlier today, and now when I try to start it up, it won't load all the way. When I do manage to get to the homescreen, the applications and toolbars won't load. Any ideas what the issue might be and how I can fix it?

It could be a number of issues, Fred.
Have you optimized your photos to no larger than 1000x750 pixels, per the FAQs to the right of this forum? Oversized photos are the chief reason for these types of failures.
http://forums.adobe.com/thread/431851?tstart=0
You also say your videos are MP4s. Are these AVCHD video or are they from a "webbie" camcorder, such as the Flip cam? Flip video uses a proprietary codec that often jams up video editors. This is also covered in our FAQs.
http://forums.adobe.com/thread/437535?tstart=0
Finally, have you ensured that the drive you are saving your video to has adequate free space and is freshly defragmented? You should always have at least 30 gigs of free space on your drive plus 30-50 more for each hour of video you're outputting.
And, if you are exporting to a drive other than your C drive, you should ensure that the drive is formatted NTFS rather than FAT32. FAT32 drives have a file size limit that often chokes video output.

IMac makes a loud beep on start up, won't load past the blue screen and the black ticking dial appears every few seconds in centre of screen.

Urgent help!
Out of the blue my mac lost the mouse cursor even though it had connection so I rebooted only for the mac to make a loud beep on start up then get stuck at the blue loading screen. It won't load past the blue screen. I've tried to reboot holding down the shift key but no change. I've also shut down, unplugged the main for 15 seconds, re plug and wait 5 seconds before starting up again but no change. Does anyone have any suggestions?
PS: I'm not too sure which systems I am running without being able to check in about this mac. I bought my imac in January or February 2011 if that helps.

The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
http://support.apple.com/kb/HT1547

When I tap facebook or skype it won't load just flicks on then off

When I tap facebook or skype it won't load, just flicks on then off

When I tap facebook or skype it won't load, just flicks on then off

HT4623 My App Store won't load up the updates tab until my mobile data is switched off?

My App Store won't load up the updates tab until my mobile data is switched off?

My App Store won't load up the updates tab until my mobile data is switched off?

My iphoto won't load, just the circle going round and round and round

Similar Messages

Maybe you are looking for