My iPhoto wouldn't work when i updated, so i deleted and now I cannot find it in the app store to reinstall.

So, I updated toYosemite and then I had the whole iPhoto issue. So, I read some forums about deleting and reinstalling, however, when I went to iTunes to re-download it will not pull up iPhoto? Help please!

Reminders is one of the built-in apps so it won't be in the app store for re-downloading, and it's not one of the apps that can be hidden via Settings > General > Restrictions (not that I can find on my phone anyway). If you can't find it on any of your homescreens or app folders, then can you find it via the spotlight search screen (swipe your first home screen to the right) ?
If not then have you tried a reset to see if you can find it after the iPhone has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

Similar Messages

  • HT4623 Just updated my iPad 2 and now I can't download from the App Store. What do I need to do?

    Just updated my ipad2 and can't download games from App Store. What do I need to do.

    Hello twil103
    Check out the troubleshooting article below for issues with access to the iTunes Store. Also there was a small amount of outage accessing the iTunes Store this past Wednesday.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Apple Services, Stores, and iCloud
    http://www.apple.com/support/systemstatus/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Can anyone tell me why my collusion .27 add-on stopped working when I updated to firefox 20 (and now 21?).

    Can anyone tell me why my collusion .27 add-on stopped working when I updated to firefox 20 (and now 21?). I've tried removing and reinstalling to no avail. I even deleted my profile files and had firefox repopulate those automatically to no avail. And it's not the only add-on to have stopped working.

    see here
    *https://support.mozilla.org/en-US/kb/re-enable-add-ons-disabled-when-updating
    Addons are enabled or disabled?

  • My I phone just updated to the new iOS and now I can't log onto the App Store, any suggestions?

    My I phone will not let me lignin to the App Store since I got the new iOS update. Any suggestions on how to get my App Store to work again?

    Yes, yes, yes... I've gone through all the common sense trouble shoots. Would't be here asking questions if that answers existed on the net. Sorry if I sound a bit edgey, but I've had nothing but issues with every update since IOS 7. Clearly there's nothing that can be done about this. and this is the final nail in the coffin to try to make me buy an Iphone 5.

  • An app has stopped working and I can't find it on the app store

    Does this mean it has been withdrawn? Is there any way I can find out for certain?
    It's only 'I can has cheezburger' but it was one of my favourites and I had the pro version I'd paid for.

    The developr's website send yoou here:
    http://icanhascheezburger.com/

  • Since I've updated my iPad to iOS 6 it's running a lot slower especially when I scroll up and down and takes ages to load up on the App Store I know they got glitches but are they gonna be sorting this out as well ?

    Since I've updated my iPad to iOS 6 it's running a lot slower especially when I scroll up and down and takes ages to load up on the App Store I know they got glitches but are they gonna be sorting this out as well ?

    Hi!
    I am also having issues with the device since updating to IOs 6. The time between clicking an icon, i.e. a picture, and the load of that picture takes longer enough to notice it. It did not happen before the update.
    I am also having problems with some applications, specially the Facebook application. When I click on my picture in the right bar of the app, it promps a window that ask me for share my location, etc.. and get freeze there.
    Regarding reseting the device, already done. It did not helped.
    Also, SIRI is very nice, but sometimes it stop working and I have to re-start the device in order to being able to use SIRI again. When it happens, it looks like SIRI is sending the information, but does not do anything after.
    It is understandable that they require some time to get the new IOs version working properly, but I dont like to be a Beta tester.

  • HT1222 I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!!!!!!

    I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!

    Paldeng, thanks for the suggestion.  I've done all that.  I can connect to the server, but apparently they are not recognizing my ID and password.  I can use the server program if I don't go through Mail (using the same ID and password).  My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do.  His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume).  We can receive email in Mail, we just cannot send.
    I contacted my service provider, and we went over my connections.  They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired.  Apple swears it is not their problem, it is the provider, so here I sit.  My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely.  The thing is, we had not messed with any of those settings, so what changed?  I just did not want to bother my son again, as he has many other demands on his time.
    Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard.  I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update.  Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

  • Hello, I have updated my iphone4s to iOS7 and now I cannot close any of my apps - I double click on button and they show but when I press hand hold the icons do not shake so i can delete them

    Hello, I have updated my iphone4s to iOS7 and now I cannot close any of my apps - I double click on button and they show but when I press hand hold the icons do not shake so i can not delete them

    You don't press and hold them. Just swipe up.

  • I'm running OSX 10.9.2, when my system updated it required my Apple ID... When I provided it, it said that AppleID hadn't been used at the App Store... so now I'm locked out of my system... what do I do??

    Suggestions Re: I'm running OSX 10.9.2, when my system updated it required my Apple ID... When I provided it, it said that AppleID hadn't been used at the App Store... so now I'm locked out of my system... what do I do??

    First, there are no PPC Macs that can run Snow Leopard or later. Did you buy your iMac used? Where did you get Mavericks in the first place? If it was installed by the seller, then you are not licesnsed to use his/her copy.
    Do you know exactly what iMac model you have? If it's a post 2010 model you can do the following:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet
                if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer. You may then go to the App Store to download Mavericks using your Apple ID.
    If you have a 2010 model you may require a special firmware upgrade before you can do the above: Computers that can be upgraded to use OS X Internet Recovery.
    If you have an earlier iMac then you must get Snow Leopard 10.6.8 installed by installing a version of Snow Leopard either included on the software restore discs or:
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.

  • I updated to mountain lion and now mail cannot connect to my server

    I updated to mountain lion and now mail cannot connect to my server.  It says check your user name and password are correct.  Well they are, and were.  Nothing has changed except the mac OS. 
    Has anyone else suffered this and knows a way around it?  Too annoying to log into my mail every 15mins via a web page anymore.
    Efforts tried to resolve this so far:
    retyped user name and password, removed account and created a new account, restarted computer, software update, searched forums.  so far all have proved unsuccessful.
    I have also written to my mail provider and am waiting for feed back from them, but if anyone has any advice it would be gratefully received.
    Many thanks,
    Mike

    Many users upgrading to Mountain Lion have run into this problem, myself included.  You likely have corrupted settings for your  "Outgoing Mail Server (SMTP)" for each of the failed Accounts.  Open Mail>go to Mail's Preferences>Accounts>select an Account in the left column to work on>then set up your Outgoing Mail Server which will INCLUDE resetting up your Password, as its asking you to.  Click on "SMTP Outgoing Mail Server" near the bottom of the Accounts window while your mail account is highlighted in the left hand column.  When you click on SMTP... you will see a drop down box icon offered at the right side of the line.  Click it and then select at the bottom of the the list "Edit SMTP Mail Server".  Fill in the required settings for your ISP mail account using their recommended settings.

  • I upgraded to Mavericks.  I just spent an hour in Pages.  Now I can't open my documents, it says I need to upgrade to a newer version.  It looks like the new 5.0 when I typed but it's saying I'm running 4.3.  the App store says I've already upgraded.  Hel

    I upgraded to Mavericks.  I just spent an hour in Pages.  Now I can't open my documents, it says I need to upgrade to a newer version.  It looks like the new 5.0 when I typed but it's saying I'm running 4.3.  the App store says I've already upgraded.  HelP

    Actually, there seems to be a bit of a bug.  Encountered this with a couple of files my wife made.  The files were set to "open with" the new Keynote, but clicking the file brought up this error.  Right-clicking and selecting "open with..." worked correctly.  I can only assume the OS was attempting to open the file with Keynote '09 despite the file property setting.
    Probably requires a Launch Services DB reset (although I haven't actually tried it on my wife's MBA yet...since she's still "working on stuff".  So I can't confirm if it will solve the problem).
    /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.fram ework/Support/lsregister -kill -r -domain local -domain system -domain user ; killall Dock

  • I updated my iPhone 4, and now it won't let me download Apps. Why?

    I updated my iPhone 4, and now it won't let me download Apps.  When I try to download an App, it just keeps spinning/thinking, but nothing ever happens.  Help!

    Have you tried restarting or resetting your device?

  • I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?

    I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?

    Hi , a similar thing happened to me with another piece of software .. it was then that I realized I have two accounts .. I have no recollection of setting up two but it seems I did somewhere along the line.. I have jimkells and the second is [email protected] .. so when I logged in as the other acc there it was and I was able to update .. could it be FCPX was bought on another user account ??
    Jim

  • I updated my Apple TV and now I cannot rent a movie

    I updated my Apple TV and now I cannot rent a movie.  It doesn't seem to be recognizing my Apple ID.  What do I do?

    People are having all sorts of problems.  I restored my Apple TV on computer.  You can also try settings. I think you have to turn on using iTunes from cloud on Apple TV.  I just rented a movie for my kids and is working fine.

  • I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
    iTunes: Restoring iOS software - Support - Apple

Maybe you are looking for

  • Printing problem with JFame

    Hi We have an interesting problem regarding printing the JFrame. Our JFrame view is similar to some thing like this: |cutimg |copyimg |Printimg |Info | //Tool Bar panel |-------------------------------------------- | | Label Text Field     | // Field

  • How to Play 3gp in a MIDlet?

    Hi, wich APY should I use? MMAPI? oR 3D? Has someone some exaple of code? Thanks.

  • Transaction F.13 - Flag on "GR/IR Account Special Processing"

    Hello, I have a question regarding the functionalities of the transaction F.13. When the flag "GR/IR Account Special Processing" has to be flagged? There is any relationship with the field XREF3? Thanks a lot, Emanuela

  • Global Track Tempo Line

    I've done a tremendous amount of rubato type editing in the Global Tracks Tempo Line. But some of the tunes are generally too slow. Is it possible to make the whole track faster while keeping the ratios of the gradual tempo changes? e.g. can I keep a

  • Excluding Value Range - ABAP Routine at Infopakage Selection

    Hi, In Production the volume of data is very high, I m splitting the data based on Material No. 000000000000 - 4ZZZZZZZZZ, 500000000000 - 8ZZZZZZZZZ, 900000000000 - FFFFFFFFFFFFF, and the remaining Material No.s. I created seperate InfoPaks for the m