My ipod 2g screen doesnt work anymore after replacing it with a new one. Please help
My ipod touch 2g display wasnt working anymore. The brightness wouldnt work anymore and i did everything, restore, on and off recovery mode everything. So i decided to buy a new screen. When i got it i got straight to it and replaced it. When i turned it on to test out the new screen nothing showed up, i plug it in and everthing. Then i changed it back to the old one and nothing showed up as well. Please help
If you restored to factory defaults/new iPod and still have the problem you very likely have a hardwre problem and an appointment at the Genius Bar of an Apple store is in order.
Similar Messages
-
My ipods touch screen doesnt work anymore i cant unlock my ipod
my ipod was working fine for a while and then now all of a sudden the touch screen doesnt work at all. Ive restored it twice now and i cant unlock my ipod because the screen doesnt work..anything i can do to fix it or do i have to buy a new one?
If you restored to factory defaults/new iPod and still have the problem you very likely have a hardwre problem and an appointment at the Genius Bar of an Apple store is in order.
-
How can I deauthorize an old (retired) iPod after replacing it with a new one?
When replacing an older iPod with a new one, as I already have, is it necessesary, or even possible, to deauthorize the old one, as you would when replacing computers?
No, it isn't.
(57893) -
My HP LaserJet 1536dnf Printer is printing black pages after replacing toner with a new one!
I changed out the toner cartridge for my HP LaserJet 1536dnf printer with a genuine HP toner cartridge and now it is printing out black pages. Any suggestions as to how to fix this?
Thanks!
This question was solved.
View Solution.Hi @Beaglemom49779,
I see by your post that you replaced the toner and are now getting all black pages. I can help you with this.
Did you have the same issue with the printer before replacing the toner?
It could be a hardware or fuser issue with the printer.
If the issue just started after replacing the toner then most likely it is the toner.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
Number one cause of toner issues.
Inspect the toner cartridge for damage:
1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
Fingerprints on the imaging drum can cause print-quality problems.
4. If you see any scratches, fingerprints, black on the drum, or other damage on the imaging drum, replace the toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
Please call our technical support if the there is a issue with the toner and inquire about a replacement, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
TS2771 HELP! My ipods touch screen doesnt work anymore!
My ipod screen is not working! I updated to latest version. This started last few years (2011) and I thought it would stop, but it dosent work! Q.Q Help me pls
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Ipod touch screen not working even after resetting to factory specs
ipod touch screen not working even after resetting to factory spec. lock symbol appears at top
That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.
-
HT201210 My Ipod will not work anymore its just the apple showing could you please help me restart
My Ipod will not work anymore its just the apple showing could you please help me restart?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch broke then replaced it with a new one. I already dloaded iOS5 on the old one. When I connected my new unit it says it won't load the previous back because the new one is not up to date... Do I really have to download iOS5 again?
Yes, you have to update the iPod in order to retore from backup. The iOS on the "new" has to be aequal to r greater than on the iPod from which the backup was made. The iOS downloads are unique to an iDevice and model (the one for a 3G iPod will not work for a 4G iPod).
-
My 5th gen ipod died and apple replaced it with a new one. I synced it up to the itunes that I already have on my computer but an error message keeps coming up telling me that its not authorized on this computer. What do I do?
About iTunes Store authorization and deauthorization
iPod: Troubleshooting songs and audiobooks that won't play
iPod does not play content purchased from the iTunes Store -
Please be informed me... with my battery or charger problems....
my iPad 2 charger is not working....
since I've got it for five days ago, I only use it for three times....
Are they going to replace it with a new one ?Most likely yes. There's a manufacturers warranty against defects for a year. I'd contact your place of purchase and talk to them about it.
-
I had an old iPod classic 40 gb, now it doesn't work anymore; have to add another one (iPod classic 60 gb) to my iTunes (windows XP), which is the right procedure?
Plug it in and follow the onscreen directions. That you previously had an iPod doesn't matter.
(58889) -
I have a OSX Version 10. 5. 7. The firefox I had was working fine, but it kept telling me to update, and it was working slow, I updated it to the newest version, it wouldn't download it unless I REPLACED, the old version, now it is gone, the new one doesn't work, I now have no firefox, I looked around on the forum, but found nothing and tried some suggestions, but I cannot get any version of firefox to open, and I had some serious book marks and passwords remembered, and I am in a bit of serious trouble, can someone tell me what to do?
BillFirefox 16.0.2 is the last version that works on an Intel Mac with the OS X 10.5 operating system.
* http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/16.0.2/mac/
Another possibility is to install the Firefox 10.0.12esr (BuildID=20130103094221) version that has more security updates, but misses features present in Firefox 16 (BuildID=20121024073032).
* http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/10.0.12esr/mac/
* http://www.mozilla.org/en-US/firefox/10.0.12/system-requirements/ -
Hi
I have a HP Pavilion p6606f Desktop PC Windows 7 64-bit. I was trying to burn off a DVD and it will not reconize DVD's or games, but will reconize a CD.
Please help
Thanksselinahillier wrote: Hi I have a HP Pavilion p6606f Desktop PC Windows 7 64-bit. I was trying to burn off a DVD and it will not reconize DVD's or games, but will reconize a CD. Please help Thanks
Hello selinahillier, Many times when this happens the DVD laser has become faulty. I have removed the DVD drive, and the DVD drive case, and used a soft cloth and some cleaning solution to clean the DVD Laser and managed to get the DVD working again.
Since DVD drives are as inexpensive as they are now, it might be best to just purchase a new one.
These can be purchased for less than $20.00 USD now.
Here is a link to NewEgg where these drives can be found.
Just some thoughts.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem. -
My ipod touch 2g doesnt work anymore so what should i do
hi
Without more information such a the current status of the iPod all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
please help
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097
Maybe you are looking for
-
What are the must have SAP componets req to publish MDM 7.1.03.86 on web
Can anyone explain to me what are the SAP components required for MDM 7.1.03.86 allowing me create a webpage front end to MDM 7.1 and create and publish my own screens? Like many I am very new to the world of SAP. There are many others in my own comp
-
How do i get my music off my ipod so i can put it on my computer
how do i take the music off my ipod and put it on to my computer , even if i can copy them , just dont no how to do it xxx
-
while using alv, how can we refresh it? if it is not first display then of course will be refreshed but how, I do not know. Anyone that can help me? How it is understood that it is refreshed? When clicked a tool or button? Thanks in advance. Deniz.
-
Can I set up 2 different Itunes on my CPU?
I have 2 ipods and we want different things (some the same)on these units? I hate doing manual transfers, so I am wondering if I can just have 2 different itunes on my computer? Can anyone help here?
-
I did a hard drive test and got this error code.. what does it mean?
4MEM/4/40000000: 0x6a494c18