My ipod (2nd generation I think) is not working

my ipod, which is about 2 years old, never has any battery no matter how many times I charge it, I dont think its its the battery because I just stopped working one day, it wasnt a gradual process. I displays a low battery sign everytime i try to turn it on, and then switches off. The computer dosnt recognise it aswell. Does anyone have any suggestions to how I may fix my ipod and get it functioning again.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:                                                
iOS: How to back up                                                                                     
- Restore to factory settings/new iOS device.             
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
  Apple Retail Store - Genius Bar

Similar Messages

  • I have a iPod 2nd generation and it will not charge or connect to itunes

    I have a iPod 2nd generation and it will not charge or connect to itunes, I have tried pressing the power button and home botton together and nothing happened.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Also:
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.

  • I have restored my ipod nano 2nd generation but its still not working

    i have reset my ipod and restored it but it is still not working. i have connected to itunes and it has loaded some music onto it but though the light comes on you cannot see anything else on the screen. any suggestions would be appreciated

    It might be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • My ipod 4th generation touch screen will not work when i touch it its not reconizing my finger when you put a blanket on a screen and try to touch it wouldnt do anything help please

    does any body know why

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Can't see the list of songs on my iPOD 2nd generation

    i have installed the ipod, and i am able to transfer my songs into my ipod 2nd generation, however i am not able to see the list of songs that i have put into the actual ipod shuffle. Can someone please help me !
    thanks

    no, there is contents. i just figured it out.
    to recap: i had 2 problems: one was that i couldn't see the contents of the shuffle. the other was that i couldn't eject my shuffle. when i tried to eject, i kept getting the message that i couldn't eject because an application was using the files on the ipod. when i clicked the icon of my shuffle i got the picture of the ipods with the heading "ipod + itunes," as i recall. there were no settings or content tabs.
    now i realize there were no tabs because i had not finished the registration of the shuffle on my pc. i had registered the shuffle on the website without using itunes. i didn't realize that there was more i needed to do in itunes because i couldn't see all of the buttons in my window. when i followed through with the registration in itunes all the way to the end, the 2 tabs were revealed and the songs that i had already loaded on the shuffle were listed in "contents." and, i was able to eject the shuffle. apparently itunes (or whatever) was still looking for a completed registration and wouldn't release the shuffle. sigh.
    if you can not see the settings and contents tabs in itunes when you click your shuffle in devices or you can not eject the shuffle, look at the window with the picture of the ipods in itunes. there is more below. complete the registration (i had already done so on the web earlier, but my itunes was not complete.).
    thanks to everyone for your help.
    power spec 8921 (pc)   Windows XP  
    power spec 8921 (pc)   Windows XP  

  • My ipod touch is a 2nd generation (i think). has deleted all my songs and videos

    hi i have a i pod touch (2nd generation i think). last night i was setting the alarm clock on it and once i had done that i tryed to go to the home page but it wouldnt let me do it so i figured out it had frozzen an once it had stopped being frozzen i went to go and listen to some songs as i had downloaded 2 new song straight to my ipod from itunes (using wifi) once i got to my music i went to have a look through my albams i had noticed that my ipod or itunes had deleted all my music and videos (apart from the songs and videos that i had downloaded straight to my ipod from itunes using wifi) all my photos and apps are still on my ipod and i was just wondering if this has happend to any one else before and to get all my old songs back do i need to reconect my ipod to my laptop or will the songs just come back PLEASE HELP IM IN NEED OF ANWERS FAST thank you and sorry for all the writing x

    Plug your iPod into your computer and resync your songs back on.

  • I can see my ipod nano 2nd generation under finder but not under itunes.

    I can see my ipod noano 2nd generation under finder but not under itunes. I can't upgrade the music on the ipod nano if itunes doesn't show it. How can't I fix this problem?

    See this article first.
    http://support.apple.com/kb/TS1461
    If still no luck, try a low level format of the iPod using Disk Utility and the instructions provided in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • HT4623 The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
    Try disabling the computer's security software during the download and update.

  • My iPod 2nd Generation won't turn on and will not connect to any computer!

    A few months ago I woke up one morning and tried to turn on my iPod 2nd generation. It wouldn't, so I thought that maybe it was just out of battery. I plugged it into my computer but it would not connect and charge. I tried pluging it in to many other computers and none of them worked. (I tried MACs and PCs) When this happened my warranty was already up. Now my parents want to bring it in to see what is wrong, WHILE THERE IS NO WARRANTY!!!!!!! I told them that it was a waste of time and money because we would have to pay to see what was wrong. If there is something wrong that is easy to fix great!, but if there is something really wrong with it and it is crazy expensive to fix we just waisted time and money. If there is something wrong but there is no way of fixing it we also wasted time and money!! I have explained all of this to my parents but they won't listen!!! Is it worth it to get it checked out or should I just keep trying to explain to them that it's a waste of time and money????   Help!!  

    If your iPod is still charging if you plug it to the adapter, let it charge for about 10min, then connect to your computer in recovery mode, explained in this article:
    iOS: Unable to update or restore
    If it does not charge, you'll have to get it serviced.
    Apple can offer you a replacement device, but you'll have to pay for it:
    Check the pricing here:
    http://support.apple.com/kb/index?page=servicefaq&viewlocale=en_US&geo=United_St ates&product=ipod&select=REPAIR_PRICING

  • My Ipod 2nd  generation has a problem.   I'm not able to charge it and the screen has a discolored look...everything is pink.

    There is a problem with my IPod  Nano (2nd generation). It doesn't work at all. The screen is discolored...everything is pink/red.

    Groovy.
    Try restoring it, if you can.

  • I used to be able to download temple run onto my iPod 2nd generation. I then had to restore the iPod but now I can't re-download temple run onto it. It says you need a higher ios number. Is there anything I can do to get it back?

    I used to be able to download temple run onto my iPod 2nd generation. I then had to restore the iPod but now I can't re-download temple run onto it. It says you need a higher ios number. This is the same with many other apps as well and not just temple run. Is there anything I can do to get them back?

    So, you need an older version of the iOS app, because the current version no longer works on your iPod touch.
    If you do regular backups of your hard drive (as you should), such as by using Apple's built-in Time Machine (if you use a Mac), you may find the older version of the app in the backup archive, and restore it (replacing the newer version).  They are stored in the iTunes Media folder, in the Mobile Applications sub-folder.  You should then be able to sync the older version to your iPod touch.
    I can't think of any other way to get it back...
    NOTE:  An 2nd gen iPod touch can run up to iOS 4.2.1.  If your iPod touch is running something earlier, and that is why the app no longer works, you can also consider updating the iPod's iOS.
    I use an even older iPhone (original).  I avoid this potential problem by aways updating its apps on the iPhone, not in iTunes on the computer.  When I do it on the iPhone, it will not download a newer version of an app that won't run on my old iPhone.

  • I have an ipod 2nd generation and it only works when i plug it in

    okay so i habe this ipod 2nd generation i actually have two and they are both doing the same thing at first i plug them in and the only thing that comes up is the do not disconeect screen but after a while oh fiddling with it i got the screen to go away and i can se my music and videos and i can see that my battery is full now the moment i unplugg either ipod they automatically freeze, the backlight goes out then the screen eventually fades completely away. now while this is happening none of the bottons works and the ipods are not able to be turned on or play at all almost as if there dead. but they are not becuase as soon as i plug them back in everything shows up perfect the battery is fully charged the backlight  is on and the butttons work. help please

    Sounds like your battery is not taking a charge, I know it shows full with you plug it in.  Try plugging it into a wall socket for a few hours and see if the iPod will work on battery power. 

  • Ipod 2nd generation won't work. Need Help PLEASE

    i have a ipod 2nd generation and haven't used it for 3 months or more. and now that I try to turn it on, it won't turn on. I have tried charging it for 2 hours and still the screen stays black. need help. what do I do?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HT201274 i have ipod 2nd generation and i had reset   Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am co

    i have ipod 2nd generation 32 gb and i had reset >  Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am confused!!

    For a 1G and 2G it can take hours. Make sure it is connected to a charging source otherwise the battery can fully drain before it is done. If still problem
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How to unlock my ipod, 2nd generation?

    My ipod 2nd generation is disabled and it wants me to try again in 22,544,204 minutes. That is about 42 years from now. Please help!!!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for

  • DUMP error while executing SMARTFORMS

    hi ppl,          In driver program i have coded like this- types: begin of tw,        ebeln type ebeln,        bukrs type bukrs,        bsart type bsart,        end of tw, tt type standard table of tw. data: itab type tt,       wa type tw,       lf_e

  • I have the new itunes. please for the love of god help me...

    I got a laptop for xmas, got all my songs on itunes, the newest one verzion 9 id guess. If i skip a song it will stay at the same point in the song when i go back to it, it has to be the MOST ANNOYING THING IN THE HISTORY OF TIME. Does anyone know ho

  • [Solved] Error boot after upgrading and util-linux-tools and sysvinit

    Hi all ... This morning I did a sudo pacman -Syu to update my laptop which packs sysvinit-tools 2.88-8 and 2.22-6 util-linux packages including ... My surprise that I take is that a few hours ago after starting my laptop again I come across a series

  • IDoc-Adapter Monitoring

    Hi, I know the transaction "IDX5". There are sender-information and receiver-information from the xml-message. In this monitoring the settings are correct but when I look in R/3 for example the sender-information of the message are different in compa

  • Best way to convert audio to midi?

    Hi. I am in the process of layering/replacing drums and will need to create midi from some of my drum tracks. Here is the ways I found so far: Region to new sampler track: - Pro: You can use transientmarkers as base for creating midi (which is the wa