My iPod 3rd Generation keeps saying it is in recovery mode but when i plug it in it starts to recover then stops
I need help my ipod 3rd gen wont recover and i keep trying whats wrong with it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
my new iphone 4 is stuck with "USB connect to itunes". I put it in recovery mode last night. Itunes recognizes the phone and says it's in recovery mode, but when I do a restore, nothing changes.
it says "itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes." I click OK
then I click the restore button
Then the box says "Are you sure you want to restore the iphone to it's factory settings? all of your.....etc." I click Restore and Update
then it goes into software update
at the end of the software update it says "Itunes has detected an iphone in recovery mode...."
All this time, the screen of the iphone stays on with USB to Itunes
I might add that while the phone was in it's first attempt at recovery mode, it was accidentally unplugged.
any suggestions? -
My Ipod touch is in recovery mode but when I go into Itunes to restore it, it will only stay connected for a few seconds then ejects itself from itunes. How do I keep my Ipod connected long enough to go through the restore process?
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server. Help!
Place the iPOo in recovery mode for the passcode issue. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Also see:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
I m trying to update iTunes 10.5.2 my mac book air but it keeps telling me that it is installed but when i plug my new iPad and iPhone it keeps saying it has only 10.3 iTunes and it needs at least 10.5 version can anyone help?
no that does seem to work it is as if it is not recognising it. it says installed on screen but when plug new ipad and iphone4s in it says new version required but i have ran a system update and it says everything is updated
-
ok so my ipod touch is saying theres no music on it but when i plug it up and get on itunes it says theres music on it but its still not showing up on my ipod. help anyonee??
Have you tried resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Next would be to unsync the music and then try syncing the songs to the iPod
- Last would be to restore from backup. -
My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?
DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
my ipod touch power button is pushed in and wont let me turn it off. i unplugged my usb and tried to go into recovery mode but it just wont do anything..just keeps saying ipod disabled connect to itunes.but it wont even open cause its locked.how can i fix this
- Try placing the iPod in recovery mode using this program and then restore
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next let the battery fully drain. After charging for an least an hour try the above again. -
I have an iPod Touch 3rd generation and yesterday I was using it and noticed that it reset to a different time zone and when I dug a little deeper realized that it reset the date to December of 1969. I just went in and changed it all back. I was out of the house all day today and didn't take it with me, when I went to use it, it wouldn't turn on. I assumed it was dead, so I plugged it in and got ready for bed. I realized that the charging screen never appeared and it never made the little noise it does when you plug it in. I picked it up and right near where the charger plugs in, it was very hot. I use it when it'd plugged in from time to time and it is NEVER that hot. I then tried to plug it into the computer where it again didn't do anything and didn't show up as a device that was plugged in on my iTunes. Again, it got very hot very quickly. I am using the cord that came with it and an actual Apple brand wall charger. I don't know what else to do. Some people said to hold the two buttons down for a little bit, but nothing happened on mine. Please help!
Warm is normal, too hot to handle, literally, is not.
If you're concerned, make an appointment at your local apple store and have them check your charger out. -
My ipod touch 5th generation went into recovery mode when I tried to update ios. When I try to recover it just keeps looping back to recovery mode. I tried to hold the power button for 3 secs. then simultaneously hold the home button for 10 secs. then hold only power button for 20 secs. I tried this several times to no avail. This is my daughter's ipod. I am computer illiterate and I'm not sure what else to try.
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
my iphone 3gs died and now it wont make it past the apple logo screen so i put it in recovery mode and hooked it up to my itunes on my home computer now it will say do you want to restore this iphone i click ok but then after it exctracts the software then starts to restore the screen goes black and it shuts off then 10 seconds later it turns back on it wont make it past extracting software please help me im getting really mad plaease help. it wont restore my phone and the error message 1611 come up i dont get it.. also the lock button on my iphone is broken and only works when i squeeze the topo of the iphone together so i cant put it in DFU mode
Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it
-
I have been on the Apple Support page for several hours now and cannot find my exact circumstance and other suggestions have yet to help me. I purchased a locked ipod touch and when I plug it into my laptop itunes says "Itunes could not connect to ipod because it is locked with a passcode". The guy I bought it from told me the password but I failed to write it down and remember it and he has since moved so I can't find him. I have tried putting it in DFU mode and I can get it there, but then Itunes does not show the pop-up that everyone has said will come up with the alert about an ipod trying to restore itself so I cannot get it to do so. Any suggestions would be greatly appreciated!
Thanks,
AMWhen in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.
-
The iPod cannot restore, when I try and resore it, an error message appears. It is already in recovery mode. What shoud I do to get it to restore?
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store. -
The songs worked on my iPod touch and iPad
Your iPod shuffle has only 2GB capacity, so unless your iTunes music library is small, it is probably NOT syncing "all" of your music. It may not be syncing any songs... If you use automatic syncing, you may need to set up the shuffle's Music tab in iTunes.
Connect the shuffle and select it in iTunes. There is a row of "tabs" (starting with Summary). Select Music there. This is the Music tab, where you tell iTunes how to sync the shuffle with songs. Sync Music is checkmarked forautomatic syncing.
If your entire iTunes music library can fit on the shuffle, you can choose to sync Entire music library. Otherwise, you can choose to sync Selected playlists, artists, albums, and genres. Create your selection of songs below. For example, if you want to keep it simple, create a new regular playlist in iTunes. Put ALL songs you want on the shuffle on that playlist. Back on the Music tab, find and checkmark that new playlist under Playlists.
When you click Apply, your selection of songs on the Music tab syncs to the shuffle, replacing its current content. Going forward, any library changes that are related to the Music tab settings sync automatically when you connect the shuffle, or when you click Sync. So, if there is a playlist with your shuffle's songs, you can just update that playlist (add and remove songs) whenever you want; iTunes automatically updates the shuffle with the same changes at the next opportunity. -
I had an 8GB 1st gen iPod in it's original box in storage and just took it out to hook it up. Charged it overnight, plugged it into new Mac Book Pro and it was recognized as being an iPod in recovery but other identifying information was all indicated as "n/a" (so, unknown OS, etc). Error code 1604 came up so I downloaded iTunes on the Mac Book and it is currently showing version 10. But now when I try to restore the iPod, error code 1611 comes up and the troubleshooting doesn't tell me what else to try. The USB connector that came with the iPod was also never used before - brand new also from the box so that should be fine. I also tried a different USB port on the Mac Book. Any ideas?
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Maybe you are looking for
-
Error while running Hello World Page
Hi I am getting the following error when I run the Hello World page from the Tutorial. oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SECURITY_APPL_LOGIN_FAILED. ## Detail 0 ## oracle.apps.fnd.framework.OAException: Applicatio
-
RE: JAVA engine not starting
Hi all, We have problem with java engine. server0 process of J2EE engine is not starting. I am pasting the trace file trc file: "D:\usr\sap\SPS\DVEBMGS00\work\dev_server0", trc level: 1, release: "700" node name : ID1891050 pid : 8148 syste
-
Hi Gurus! I think I know the concept of Enterprise Services, but I need to know technical aspects of ES (Integration on systems, ...). Could somebody give me information, links, examples,...? Useful answers will be rewarded. Thanks and regards, Manue
-
Here is A Fix for Axiom Pro control surface on Logic 9 on OSX10.10.2
here's a fix 4 problems mapping Axiom Pro to Logic 9: paste these drivers into Applications/ Logic ...right click...choose Contents/Midi plugins folder: Axiom Pro.bundle Axiom.bundle If this cut and paste is non-functional ( after I click 'post')...y
-
Anyone else have missing apps since they updated to ios6? I paid for angry bird space when it was released but since ive updated my new ipad to io6 it isnt listed in my purchases on my ipad or on purchases on my itunes on my windows pc. Am i doing so