My ipod 4 fell down to floor and turn to white screen,can't switch on...how can i solve the problem??
my ipod 4 fell down to floor and turn to white screen,can't switch on...how can i solve the problem??please help me
That symptom is covered here. However, you may have a hardware problem caused by the drop. and an appointment at the Genius Bar of an Apple store may be in order.
iPod touch: Hardware troubleshooting
Similar Messages
-
I've Firefox version: 3.6.8 , OS: Windows XP - The back and forward buttons disappears. Resetting customize toolbar to default doesn't solve the problem.
== This happened ==
Every time Firefox opened
== Firefox was updated to ver 3.6.8In Firefox 3.6 and later on Windows you can hide the menu bar via "View > Toolbars" or via the right click context menu on a toolbar.
Press F10 or press and hold the Alt key down to bring up the menu bar temporarily.
Go to "View > Toolbars" or right-click the menu bar or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization -
in iMovie:
I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?
please help.
J. AalbersShouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project? -
My ipod shuffle(2nd gen) is not visible on itunes, i have downloaded latest version of itunes on my pc, how do i solve the problem ?
Hope the below link may help you to fix your issue:
http://support.apple.com/kb/TS3716 -
I began having problems with my iphone 5 after I updated to ios7. It began having several issues e.g. freezing, turning on and off by itself and the home button was not responding.
It is a long story because I had to talk to apple reps etc. to make a long story short; my iphone is now in recovery mode and only works when it is set as a new iphone.
Now my back up data on itunes will not back up into my iphone 5 and my iphone is still in recovery mode.
How can I restore my itunes back up data into my iphone 5?
How can I get my phone out of recovery mode?
How can I recover my potentially lost data, contacts, sms, etc., due to backing up my iphone and trying to fix the issues with apple reps?ArmanG wrote:
Should I just let the energy run out and then plug it into iTunes and see what happens?
Might be a better idea to try ALL of the Basic Troubleshooting steps as already mentioned to attempt to resolve the issue. -
When I login to update my existing apps, the login window shows the wrong apple id. i cannot change it because it is all grayed out. how do i solve this problem?
Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. -
My iPhone keeps shutting off and turning back on when I use it. How can I fix this?
My iPhone keeps shutting off and turning back on when I use safari, my apps or just when I use it, what can I do?? Help!
Try restoring your iPhone.
See here for details: http://support.apple.com/kb/HT1414 -
I am loosing several emails from my inbox and from my sent tray on both my imac and my mac book but not from the same accounts on a Windows PC. What is going on here? How can I cure the problem?
What version of OSX?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk.
Then in Mail, select each Mailbox & Rebuild from the Mailbox menu.
Is this a MobileMe or dot mac account? -
After what seems to be a normal upgrade to the new Mountain Lion OS X on my early 2008, 24" iMac. My iMac counted down to restart but did not turn all the way off. At the end of the count down the screen went white with a small file folder flashing on and off in the center of the screen. Also there is a ?, question mark in the miaale of the file folder. The screen responds to no keyboard or mouse commands. Request help.
My computer was doing the same as yours hinikuru but now there is a change. I turned my iMac off by the button on the back and left it off for about an hour. When I just turned it on the center Apple logo was back and soon the loading logo for the new Mountain Lion program came up. On the bottom of the logo there is a horizontal sliding bar that says the program will take 34 minutes to load. Time will tell. I have two iMacs and if this goes we'll I will install the new Mountain Lion tomorrow. Hinikuru, I was about to follow the information in one of the side bar blocks titled "More like this" on the right side of this screen when my iMac seemed to fix itself! Good luck. I think not all is lost.
-
Message
"Firefox.exe. The procedure entry point sqlite3_ob_status could not be located in the dynamic link library mozsqlite.dll"
Appears as soon as I try to use Firefox. Kit in Toshiba Net book.
No problems of this type before.Thank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle -
The download always fails with the error code U44M1I210 but it tries to download every time I use Elements.
Hi kayemaych,
Please make sure that the two files (.exe & .7z) files are inside the same folder & then try extracting again.
if its still giving you issues then you may have to re download the .7z file.
Thanks -
Hi everyone
The problem should be trivial. We want to grant a quota to specific classes and use equally the remaining quota of available bandwidth to all the requesting classes. Let's clarify with an example:
Class 7 ==> priority queue, level 1 with police 20%
Class 5 ==> priority queue, level 2 with police 40%
Class 6 ==> CIR 12%
Class 3 ==> CIR 11%
Class 2 ==> CIR 8%
Class 1 ==> CIR 5%
Class 0 ==> CIR 4%
To simplify let's suppose that there is no traffic on class 7 and 5 and that all remaining classes are generating traffic at a rate of 300Mbps each. Outgoing interface is 1G so congestion occurs. We want that each class 6,3,2,1,0 receive its granted value (so, respectively, 120M, 110M, 80M, 50M and 40M for a total of 400M) and that the remaining available bandwidth (600M) will be equally assigned, so 120M to each class.
Documentation from IOS-XR 5.2.2 let's understand that this should be the default behavior but if we run the policy shown below what we get is a weighted assignment of the remaining quota.
The policy used is the following:
policy-map TEST-POLICY
class qos7
police rate percent 20
priority level 1
class qos5
police rate percent 40
priority level 2
class qos6
bandwidth percent 12
class qos3
bandwidth percent 11
class qos2
bandwidth percent 8
class qos1
bandwidth percent 5
class qos0
bandwidth percent 4
class class-default
end-policy-map
The documentation of IOS-XR 5.2.2 states that both "bandwidth percent" and "bandwidth remaining percent" could be used in the same class (which could be a solution to force the requested behavior) but using both generates the following error:
!!% Both bandwidth and bandwidth-remaining actions cannot be configured together in leaf-level of the queuing hierarchy: InPlace Modify Error: Policy TEST-POLICY: 'qos-ea' detected the 'warning' condition 'Both bandwidth and bandwidth-remaining actions cannot be configured together in leaf-level of the queuing hierarchy'
How could be solved the problem? Maybe a hierarchical QoS with the granted quota in the parent policy and a "bandwidth remaining percent 20" in the child?Hi everyone
just to provide my contribution, the hierarchical QoS policy works balancing the remaining bandwidth after granting the requested bandwidth (see the policy implemented below). However for priority queues it is granted the policer quota but sending more flows these appears to be unbalanced. So the problem to have both PQ served (in a balanced way between flows) AND have the remaining bandwidth distributed equally remains open ...
policy-map TEST-POLICY-parent
class qos6
service-policy TEST-POLICY-child
bandwidth percent 12
class qos3
service-policy TEST-POLICY-child
bandwidth percent 11
class qos2
service-policy TEST-POLICY-child
bandwidth percent 8
class qos1
service-policy TEST-POLICY-child
bandwidth percent 5
class qos0
service-policy TEST-POLICY-child
bandwidth percent 4
class class-default
service-policy TEST-POLICY-child
end-policy-map
policy-map TEST-POLICY-child
class qos7
police rate percent 20
priority level 1
class qos5
police rate percent 40
priority level 2
class qos6
bandwidth remaining percent 20
class qos3
bandwidth remaining percent 20
class qos2
bandwidth remaining percent 20
class qos1
bandwidth remaining percent 20
class qos0
bandwidth remaining percent 20
class class-default
end-policy-map -
Ipod fell down and now not recognisable
My ipod fell down and now when I connect to my computer it doesnt show up in itunes or in "My Computer" as well. But it is asking me to reformat the ipod.
How do I get around this? If I reformat I guess I will lose all the songs in there and I dont even have back up of those songs (almost 15GB of songs)Does the iPod itself turn on and work? Did you try resetting it?
http://docs.info.apple.com/article.html?artnum=61705 -
WD Mycloud 4TB fell down from table and hearing click sound
WD Mycloud 4TB fell down from table and hearing click sound for few times and hearing no sound, Please help me on how to recover my data from this drive? I see red light come up after a while.
Sounds like the drive has been damaged if your hearing a clicking noise from the hard drive. If you have an ongoing SafePoint backup you should be able to access the last SafePoint backup to recover or access the files that were last backed up from the WD My Cloud. If the drive is no longer accessible after doing a soft reset (press and hold the reset button for 4 seconds) or a system reset (press and hold the reset button for 40 seconds) then chances are high the drive is either damaged or the unit is bricked. You have two basic options but there may be others.Contact WD and enquire about data recovery and warranty repair/replacement of the possibly damaged drive.Void the warranty and remove the drive from the WD My Cloud enclosure connect it to a computer (like through an external SATA enclosure/docking station or via a desktop PC) and use a Linux boot disk distro or a Linux OS (possibly even a Mac) to access the hard drive and possibly its contents.On a side note same thing happened to a family member. Thier WD My Cloud got knocked off a shelf onto a stone floor and damaged the hard drive. The impact was hard enough to knock the white cover off the WD My Cloud. Drive was pulled but was erratically recognised by Linux and the data was non recoverable (with the tools I had on hand) from the drive. Took a spare unused SATA drive and followed one fo the various threads (like this one or this one) on recovering a bricked or replacing the hard drive on a WD My Cloud and had the WD My Cloud back up and running some time later. The work around in the future is to use the SafePoint feature of the WD My Cloud user interface to backup the WD My Cloud to another hard drive like an attached USB drive. that way you provide some data redundancy in the case of the WD My Cloud hard drive becoming unreadable/unusable.
-
I am currently restoring my ipod 5 however half way through re-covering my ipod 5 Itunes says "locked with a password unlock ipod etc..." and turns on the ipod and my ipod is still disabled...
what do i do??Try and force it into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.
Maybe you are looking for
-
java.rmi.UnmarshalException: error unmarshalling return; nested exception is: java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: Employee at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:173) Actually i post the valu
-
Why do some of the filters in the Filter Gallery turn my image orange?
I've been trying to use some of the filters in the Filter Gallery, but most of the filters in the Sketch category inexplicably turn whatever image I'm working with orange. I've tried this with several images, and got the same results. They all give m
-
Revenue values are not flowing into COPA
Dear Experts, We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Accou
-
What is a transport and how to configure it?
Hello, I am using NW 04 Patch 11. When users go to home->work there is a calander there. The calander is not active and there is a message there: "No transport has been configured for the calendar". Can someone please explain me how do I get this cal
-
how can i put the music from my phone back on to itunes if my computer crashed & I had to download a new itunes