My ipod 5g usb not recognized

I cant access my ipod files through itunes & windows explore it said "usb not recognized"
I already did all this step http://support.apple.com/kb/ts1538 , but didnt work
I also try to delete unknown device from USB Controller and reinstall the driver , its also not worked
I try Plug in on DFU & Recovery mode , it also useless
Im on windows 7 ultimate 64bit

Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or       
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Similar Messages

  • Ipod touch usb not recognized malfuntion

    something is wrong with my ipod
    everytime i hook it up it says device not recognized
    look

    - Try a reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another computer to hlep determine if you have a computer or iPod problem.
    - Make an appointment at the Genius Bar of an Apple store.

  • Can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized itried all the tips like reboot and restore plshelp me thanks

    can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks

    Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/

  • USB not recognized from my ipod touch 2nd gen on any of computers.

    USB not recognized from my ipod touch 2nd gen on any of computers.

    Just what are you doing where?
    Are you trying to sign into Settings>iTunes and App Store?

  • My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

    I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

    You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
    Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

  • Ipod classic 160 usb not recognized

    Ipod Classic 160 (not recognized by computer) and under Ipod Diagonistics (no Ipod found). I have two other Ipods which I-Tunes and my computer recognizes.  I have reset Ipod to no avail. Because I am unable to connect to I-Tunes with the Ipod I am unable to restore or reset.  I have watched all the YouTube videos and followed each.  One thing that is strange is it will not test or disconnect from disk mode.  I really enjoyed this I pod and hope one of you can resolve this problem for me.  Thanks

    Howdy spacecraft24,
    Welcome to Apple Support Communities.
    From what I gather, your iPod classic isn’t recognized by iTunes on your PC. Take a look at the article linked below and try running through the troubleshooting suggestions that it provides.
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Take care,
    -Jason

  • My 120GB IPod classic is not recognized by my Windows 7 PC.  When I plug the ipod into my computer I receive a message saying that the USD device is not recognized.

    My 120GB IPod classic is not recognized by my Windows 7 PC.  When I plug the ipod into my computer I receive a message saying that the USD device is not recognized.  The Device Manager lists it as an Unknown Device.  I've tried uninstalling iTunes and reinstalling it, but it had no affect.  The odd thing is that our other iPod (160 GB Classic) is recognized on the same computer using the same USB cable.  When I plug the ipod in question into another PC, the PC seems to recognize the iPod and lists it in Windows Explorer (iTunes is not installed on this machine).  There seems to be something out of wack with this PC/iPod combo.  Any thoughts on what I can do to try to resolve this issue?  I tried all of the steps listed here, but they didn't help me.  http://support.apple.com/kb/TS1538
    Any help would be greatly appreciated.

    Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

    My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error.  My iPod is now having a connect to iTune screen.

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    http://support.apple.com/kb/TS3694#error1602

  • My iPOD touch is not recognized by Windows Vista

    My iPOD touch shows a USB cable pointing to the iTunes logo.  In addition, my computer doesn't recognize my iPOD.

    iOS: Device not recognized in iTunes for Windows
    Then restore via iTunes.
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad

  • TS1363 My sons iPod touch is not recognized by iTunes, or windows.  Is this repairable?

    My sons iPod touch is not recognized by iTunes, or windows.  I have tried a variety of options, even resetting, but still no luck.

    What does the iPod's screen say or do, when you connect it to USB port on the computer?
    The article referenced is for "regular" iPods.  An iPod touch is an iOS computer, so this article would be more appropriate for troubleshooting.
    http://support.apple.com/kb/TS1538
    Be sure to rule out a faulty USB cable as the cause.  Try another cable, or try the cable you have with another device that has a dock connector.
    Also, you should do this test to rule out a problem with the USB port (such as lack of power or USB device conflict).  Shut down (power off) the computer and disconnect all USB devices, including any hub, except for standard keyboard and mouse (if normally used).  If the computer is a laptop, connect its power adapter (so that it's not running on battery power). 
    Then, start up the computer, run iTunes, and connect iPod to a direct USB port on the computer.  If it still does not connect, connect something else to the same USB port to confirm it is working.  Preferably, use something similar, such as a USB flash drive or external drive.

  • My ipod touch is not recognized by itunes or as a device on my computer even though it is connected

    ipod touch is not recognized in itunes or as a device on my computer, it worked a few days ago

    Do you have another USB cord you could try?

  • My Ipod Classic is not recognized by my PC but is recognized on my laptop.

    Hardware: Ipod Classic 32
    Software: Windows XP Pro, Service Pack 3
    Issue:
    If I plug the ipod to any USB on the pc I get a notice that says "USB device not recognized"- If I go to the drivers and uninstall, and then reset, it will recognize the unit- briefly flashing the red "do not disconnect" sign and then do the same thing stateing that it's unrecognized.
    However, If I plug the ipod to one of the laptops, there is no issue at all. (I've done the disc mode as well)
    I went so far as to uninstall all the drivers and reset them all and then the ipod was recognized but my keyboard was disabled!  So, I reset again and everything works but the ipod is still not recognized.
    Additionally, I have a slot where I would plug a camera memory card and it also stopped working around the same time the ipod did. The odd part is that if I plug the camera via usb, I can upload pics with no issue- just can't use the slot for the memeory card.
    I was thinking that this is an issue with the driver but it seems intermittent as I have left the ipod plugged a for a while a few times and sometimes it will just start working out of the blue.
    I am not sure what else I can do. Anyone have any ideas?

    Did you completely remove all Apple related software from your system and re-installing it from scratch using the exact instructions in this Apple support document?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    B-rock

  • Ipod Touch 4 not recognized by computer

    A few months ago I got a new laptop and it runs Windows 8. I have connected my IPod and had no problems syncing it before. . . But a few days ago I tried to plug it in and sync it and my laptop is not even recognizing it. It say "USB not recognized" and tells me the device may have malfunctioned. I have tried everything I can find online so far to do. I have even reset it to factory settings, but still it does not recognize it. I have 2 cords and tried them both. It charges when I plug it into the wall charger, so I don't thing it is the charging port. . .I am out of ideas. Can anyone help me?!? Please?!?

    What was the error number?  That would be very useful since the following gives actions for various errors.
    http://support.apple.com/kb/TS3694
    Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes.  See:
    http://support.apple.com/kb/HT1808

  • My ipod video is not recognized by the computer what should i do/

    my ipod video is not recognized by the computer what should i do?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • HT1923 USB not recognized! HELP URGENT

    Heyy Everyone!
    I really need help!! Okay so this is the case I connected my iPod touch to the laptop Sony Vaio, and this is the first time it ever happened it says USB not recognized, doesnt open itunes or anything, yes I searched and searched did everything nothing worked please if you know how to fix this.. I tried it on couple more laptops/computers still the same any idea what could caused the problem, i used it like couple of times and left it for a month-ish oh and its 22,321,272 minutes locked and I really want to restore but really cant desprately need help

    ok, Im sorry to update this thread again but I fixed one issue and made another...
    So on another thread I read that sometimes the issue is fixed from shutting down the computer and actually unplugging it from the wall. I did that and at restart it worked! It prompted me to restore my settings and it went through and works fine now. HOWEVER... my apps are gone! I did a backup on itunes today that it loaded, but the apps are not there.... what happened?? Please tell me they are not lost.....

Maybe you are looking for

  • Formatting mySQL date in a dynamic field

    Hi all.. I've seen many articles on here about how to INSERT dates to the mySQL table, but I need to know how to format it into MM/DD/YYYY when the form dynamically populates from an existing record.  Just using a regular DW8 Recordset behavior for t

  • I CAN SEE ALL SHIP TO LOCATIONS FOR THE CUSTOMER EVEN IF I SELECT ONE BILL

    Dear, I CAN SEE ALL SHIP TO LOCATIONS FOR THE CUSTOMER EVEN IF I SELECT ONE BILL TO Steps: Create customer name "customer 1" Under this customer, I create 2 new address "Customer A " with tow business purpose 1-bill to –> customer A 2- ship to-> cust

  • Setting Font/Color for ProgressMonitor

    Hi All, I am using ProgressMonitor something like this. pbar.setNote("Loading:"+f[index].getName()+ "  " +"with Operation of " + counter + "% complete");Where pbar is an instance of ProgressMonitor.Now we can see that setNote method inside ProgressMo

  • Major Photoshop Lag - 2013 MacPro

    Having some major Photoshop problems, and this is a BRAND NEW computer, just put into production... I'm using Photoshop CC 2014.  Initially, everything works great.  However, after working for about 30 min to 1 hour, or retouching about 15-20 images,

  • What host credentials must be given in local Instance ?

    Hi i have a 10g DB on my local system on Windows XP SP2. We have exchange.com domain in our comoany I am able to start EM, but cannot perform recovery unless i enter host credentials. I entered my username on exchange and the password but it doesn't