My iPod camera is very blurry after dropping it. What do I do???

I dropped my iPod touch 5 and the camera became very blurry , and after a few seconds it freezes. What should I do???
iPod touch 5th gen, iOS 8.3, 32GB

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

Keynote presentation very blurry after exporting from imovie 08

1. export keynote presentation as Quicktime .h264 size 512x384. The exported file is a .mov and the picture quality very good.
2. Import .mov file into imovie as an event.
3. Create a new project and drag event into project
4. Share/export using quicktime
5. End result is .mov but picture quality very blurry
Any suggestions as to why the final result is so poor quality?
I have tried most combinations of file type/settings/filters.
Any help would be appreciated
jebriordan

I converted it to QuickTime using the codec and frame rate you mentioned, but when I opened the converted file in FCE, the video played but there was only beeping for the audio.
I'm not sure what you meant by making my sequence settings and my media settings match, if you could give me a step by step to check that, that would be helpful. (I'm very new to this, so I don't really understand what you're talking about there.) My camera shoots in .mod format. I think iMovie then imports my .mod files and saves them as .mpeg files. Then it saves my projects as .m4v files. (That may be incorrect. That's just my guess as to why I had the movie in .m4v format, because I didn't do anything to it other than save it.)
Message was edited by: rcpii at 1540 EDT

HD Facetime camera. Very blurry. No focus

HD Facetime v.80.25 (id 0x8510) showing like super macro, good quality only on 5cm from the lens. very blurry on normal position.
All updates are done.
How I can fix that?

I'm testing it in varius mode, good light...
MacBook Air 13" mid 2012
very strange, like camera autofocus doesn't work at all.
only fixed focus on 4-5cm from the lens

Ipod nano 3rd Generation troubles after dropping.!

Hi I have had my ipod for two years now. Two days ago I dropped my ipod and it all of a sudden froze. I have dropped my ipod tons of times and it has still worked. I pressed the select button and menu at the same time, nothing. It went to the apple logo then switched over to the red circle X.
I will repeat the restart and it will go to the apple logo and then a blank white screen or back to the red circle X...I have tried just letting it run out of batteries, still the same. It has not been working and I tried doing Disk Mode, but I don't know how that even works the support just tells me how to do it...So all in all I have no idea what is happening. If anyone has any information that helps that would be great. Thankss

From my experience, you are lucky it has worked in the past, mine always has problems after dropping (on tile floor no less).
BUT, I am wondering if you connect your iPod to iTunes and click to RESTORE your iPod to original factory settings.....
Best of luck to you!

REAR CAMERA IMAGE VERY POOR AFTER 4.4.2 KITKAT UPGRADATION

HI LENOVO DEVELOPER TEAM,
IM USING S920 FROM FEB-14 AND THE CAMERA WAS WORKING VERY NICE BUT AFTER UPGRADING TO 4.4.2 KITKAT, IT IS WROST NOW. VERY DISAPOINTED TO SEE THE RESULT OF CAMERA. IT WAS SUPER FINE IN PREVIOUS VERSION. PLS. DO THE NEEDFUL TO RESOLVE THIS ISSUE. ALSO BATTERY IS GETTING DRAINED VERY QUICKLY. DON'T KNOW WHY BUT IT WAS NOT IN PREVIOUS 4.2 JELLYBEAN. MY PHONE HAS BECOME SLOW ALSO. PLS RESOLVE THE ISSUE AS SOON AS POSSIBLE.

Since Reset is not helping, Restore iPhone with iTunes on computer. If this does not fix problem, consider replacing camera or entire iPhone.

L192W display very blurry after a few hours of operations

I have a J115 with a L192W , GeForc6100 on board card.
I noticed recently that after a few hours of usage, the L192 screen becomes blurry where every icons, windows or text has a shadow.
If I turn off the power for a few minutes, the problem goes away for a while and then came back.
Anyone has similar experience?
THanks
Solved!
Go to Solution.

after a couple of months tinkering with different solutions, i happened to see my neighbor on his way to the PC-recycle place to recycle his 12 yo CRT monitor from Viewsonic . The monitor came with a old (but thick) VGA cord.
I asked if I can try that before he recycles it. That was the solution.
My guess is that the stock VGA cable that came with the monitor was not shielded properly and it picked up some interferences from some other electrical sources or something.
Anyway hope that helps someone else in the future
PS: I ended up recycling the new stock L192 VGA cable and use the 12 year old Viewsonic VGA cable instead.

How can I get my ipod classic to work again after dropping it in water?

I dropped it in soapy greasy water, is there any chance that I can save it so I can use it again?

On the iPod, create an On-The-Go Playlist.
Navigate to the first Playlist you want to use; press-and-hold the Select (centre) button until the Playlist name flashes. This puts that playlist into the On-The-Go Playlist, which is located at the bottom of the Playlist menu.
Now navigate to the second Playlist you want; press-and-hold the Select button until the Playlist name flashes. This has added the second Playlist to the On-The-Go Playlist.
Repeat for each Playlist you want to add.
Once you have added all the Playlists you want, scroll down to the end of the Playlist to On-The-Go list. If you go into the On-The-Go list, you will see all the songs form your other Playlists, in Playlist order. Simply scroll to the first song and press the Select or Play to start the first song playing.
By the way, there was no missing manual. No manual was supplied.
If you cannot find the answer by:
trial and error
by looking at the online manual;
160Gb Classic> http://manuals.info.apple.com/MANUALS/1000/MA1195/en_US/iPod_classic_160GB_User_ Guide.pdf and 129Gb Classic > http://manuals.info.apple.com/MANUALS/0/MA630/en_US/iPod_classic_120GB_en.pdf (no idea why there's a difference to be honest)
post a question in this forum and find out if one of your fellow users can help you out.

Torch won't turn off and back camera won't work after dropping it in a pool. What can I do?

I put it in rice as soon as I got back, and left it for 36 hours as instructed by a website and friends. Ever since dropping it the torch hasn't turned off and the bac camera won't work.

Water and electronics do not mix well. Your device may not ever work properly again, and probably needs to be replaced. Unless you have the AppleCare Protection Plan Plus, then it will cost $199 USD to replace an iPhone 4S.
The rice trick works best if you leave it for at least 4-5 days, not 1.5 days. But even that is no guarantee.

IPod Touch 3G white screen after dropping, still works.

I dropped my iPod Touch 3G a few days ago and it fell out of my pocket and hit the ground on its corner. I tried to use it and saw that the entire screen was just white, but it was still functioning. Everything still works but the screen is just white. Would purchasing a new LCD from eBay repair this? Considering they are around 10$ only. Thanks for the help.

It might just be a software issue. Try #2 and #3 in link below. If neither work, you might need a screen.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Ipod came back to life after washing BUT....

I washed my Ipod touch 2nd gen...let it dry out, put it in damp rid for 2 weeks and it turned on and worked for a bit then wouldn't. I let it sit thinking it was completely dead, about 4 months ago and today hooked it up in my car to the griffin firewire plug for my older Ipod and it turned on and played my music/videos etc....but the wifi is dead for sure...but when I unplug it no life.
So I'm thinking it works fine with the firewire power cord, but it won't work with my USB cord to my computer. It won't charge the battery...SO does anyone think it will work if I get a new battery in it? Found a place online for $35.00 to do it...can use this for a 'disposable' device, play my music/videos and don't care too much if it gets banged around.
Battery won't work or charge
USB cord won't work or charge
Firewire cord WORKS..won't charge...
What would you do? Know any place to really cheaply put in a battery? Hate to invest in it if it won't work with a new one either....

The Touch is notoriously difficult to change batteries for; it requires a partial disassembly and basic soldering skill. There are online videos, but I'm not sure if i'd risk it if I weren't experienced.
I found a reliable place online http://www.ipodjuice.com/ipod-touch-battery-replacement-products.htm#ipod-touch- battery-products, and if you send them an email, they'll be able to pin down the nature of your repair. Problem is, the battery may not be the only issue, and replacement only part of the potential solution.
Of course, anyone would prefer the budget route - but in this case....

HTC One M8 camera is very blurry. Reset settings to defaults and didn't fix. Think it may be a hardware issue, any thoughts?

Have seen a few other places that this might be related to the cover over the camera lense, surprising given HTC build quality but effectively ruins the camera.

fhd1,
Let's look further into this! Have you ensured there is nothing on the camera lens and removed any protectors in effort to resolve this?
TominqueBo_VZW
Follow us on Twitter @VZWSupport

IPod touch 4th gen won't restore or power on after dropping it on its back "waiting for ipod"

My iPod touch 4th gen was recently dropped on its back after playing with its case. It turned white, then powered off.
After that i tried restoring and now everytime itunes stays on the "waiting for ipod" step.
I know that all functions work because I successfully entered dfu mode many times, and the lcd powers on but the progress bar doesn't move while itunes says waiting for ipod.
Thanks for looking at my thread and sorry if i misposted (first time apple forum user)

Something has been jarred inside. Anecdotally, people have reported success smacking their device again, to maybe rejarr things back into working order. But doing that is your call since it could be defined as abuse.
If it's physically damaged inside, there may not be much of a user fix for you to try unfortunately.

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

sounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area.

Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis. I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter. I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
Myron

Mea culpa
While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails. Since this came as a freebee with the camera i neglected this vital step. I have the instslled version on my old laptop but want to install it on my new one. Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
Myron

My camera is producing blurry photos before and after ios5. What to do?

My camera is producing blurry photos before and after ios5. What to do?

Jp0man-
There are several reasons a photo might be blurry. It might be out-of-focus, the iPad or subject might have been moving when the photo was taken, or the blur might actually be noise resulting from not having enough light.
Try taking a photo of a fixed object 3 or 4 feet away with a lot of light, with the iPad propped against something solid. If you still get a blurry image, you may have a defective iPad and should contact Apple about it. If you can demonstrate the problem to an Apple Store Genius, you may get a new iPad on the spot.
Fred

My iPod camera is very blurry after dropping it. What do I do???

Similar Messages

Maybe you are looking for