My ipod cassic no longer out puts sound from either usb port or headphone jack.

I have done a full reset. Other than that it works fine. Plays movies plays songs just no sound.

Hi ,
After checking the HP Driver and Download page, as you said your product does not support Windows 8 or Windows 8.1. Since you have already tried the drivers directly from the manufacturer of the audio card. The only options that you do have are to restore your computer back to Windows 7 when it was working, leaving the computer the way that is, or purchasing the usb audio driver.
Regards.
I worked on behalf of HP

Similar Messages

  • No sound from built in speakers only headphone jack works

    Not sure what happened but I only get sounds with headphones there is no sound from the speakers from my laptop envy15

    Hi
    Please find the link given below might help you to fix your issue.
    Sound Issue
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Out put sound - speker

    pleases help me .. my lap top modle is dm4t  one of spekar is not out put sound under this spekar write dolby  why this problam   ---- my english language is not good

    akbarabooali wrote:
    pleases help me .. my lap top modle is dm4t  one of spekar is not out put sound under this spekar write dolby  why this problam   ---- my english language is not good
    Is your laptop still in warranty? Have you owned it for less than one year?
    If the answer is yes, then Contact HP for warranty repair.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • IPod will not play any music. Seems like it is in "Pause" mode.  No sound from either the head phones or internal speaker.  I have 418 songs stored and none will play.

    iPod will not play any music. Seems like it is in “Pause” mode.  No sound from either the head phones or internal speaker.  I have 418 songs stored and none will play. I have tried resetting, turning on and off the iPod, etc. but to no avail.

    Try restoring from backup. Next would be a restore to factory defaults/new iPod.

  • HT201210 I tried to update my sons ipod.  It has the itunes logo with the usb port on the screen.  If I restore I will loose all his games and music.  Is this my only option???  Help !!

    I tried to update my sons ipod.  It has the itunes logo with a usb port on the screen.  If I restore it I will loose all his games and music.  Is there any way around this??  Please Help??

    Yes, that is your only option.Yes.  You have to restore.
    Try the following if you have difficulty restoring.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder?  How do I get access to it to install?

    I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder?  How do I get access to it to install?

    Try one of your other USB ports. Be sure to insert it with the plated fingers pointing upwards.

  • When I connected my iPod Classic or iPhone 4S to the right side USB port of my 2012 11 inches Macbook Air (128 GB SSD), I get a message from iTunes that I connected my device to a USB 1.1 port. I checked the specs, it's a USB 3 port. What's wrong?

    When I connected my iPod Classic or iPhone 4S to the right side USB port of my 2012 11 inches Macbook Air (128 GB SSD), I get a message from iTunes that I connected my device to a USB 1.1 port. I checked the specs, it's a USB 3 port. What's wrong?

    When I connected my iPod Classic or iPhone 4S to the right side USB port of my 2012 11 inches Macbook Air (128 GB SSD), I get a message from iTunes that I connected my device to a USB 1.1 port. I checked the specs, it's a USB 3 port. What's wrong?

  • IPod and iPod shuffle not connecting to PC b/c of USB ports

    My dilemma is that my PC doesn't like to recognize my 2nd gen. iPod or my 512MB iPod Shuffle in the USB ports. Whenever i connect them it says "Hi-speed USB device attached to non-Hi-speed USB Hub." Obviously the problem lies in the PC, but it always used to recognize the iPod and now it won't. I am curious if anyone knows what the problem may be (with the exception of getting hi-speed USB ports) if they could help me out please!

    I've been an Apple supporter long enough to be labeled a fanboy by some, but I've seen their software quality control fall off a cliff over the last year, culminating with anything and everything related to iOS 8 and Yosemite. This release has been an utter failure. And I'm not referring to short term lapses like the calamitous iOS 8.0.1 upgrade that virtually bricked people's iPhones, since at least that was corrected in a relatively short amount of time. I'm referring to virtually every tent pole feature that hasn't even remotely worked as promised: iCloud Drive, iCloud Photo Library, Handoff, phone calls on Mac, AirDrop, etc. And now,. something as simple as recognizing a current generation iPod in iTunes. And that's not to mention the aforementioned software's impact to boot times on the Mac and battery life on the iPhone. It's sad and pathetic.
    I may not have much of a choice when it comes to computers and smartphones, since everything else on the market is far worse, but I will not be spending another dime on this company's products or services until and unless they clean up their act.

  • Toshiba L505D-ES50​25 Microphone​, Sound , Webcam and Usb ports not working

    Title says all, i also dont have any usb port tree in my device manager

    For the sound go search in your start menu sound and click manage try the same for mic you may haft to configure it if not go to device drives ( sane for ports) you either haft to enable or ad drives if that does not work shut down your computer we'll starting it up press f8 and and select repair computer if it doesn't work you will haft to repeat the sand process except don't click repair click open the partition and follow the instruction when it ask you put it to out of box state

  • Ok so I so my IPod Touch has the same problem as the one before. The headphone jack. The i hear prefectly on the right but not the left. This my second time. What do I do to fix it? I do have the Apple Care!

    I tried all my head phones and its the left side. This happened to me before, and I got a new one. I need help what I do? How do I fix this problem. If they do give me a new one do I have to buy the Apple Care again. Can they fix it. Wht am I doing wrong? Am i Putting the headphone in my ipod wrong. What is it? Ughh!!! This is annoying!!!!!

    Well if the same problem happens to all your ipods, it makes me suspect that there is something wrong with your headphones, as it would be a strange coincidence that all the ipods have the same problem.
    Unless the ipods have the same problem with different headphones!

  • No sound from speakers on dv-6245us. headphones only play right side.

    Hello.
    I have an HP Pavilion Dv6245us Laptop with Windows Vista 32-bit. I use this laptop mainly at work and it sits on my toolbox at work and I connect it to my Creative Home Theatre system via the 2 connections in the front. I switch between both the SPDIF and the headphones jacks from time to time.
    Here is the issue: I noticed the other day that when my cable was plugged in the SPDIF connection, depending on how you moved the cord, you could hear audio only on the right side. When I unplugged the cable, i noticed my laptop speakers did not play any sound. I tried plugging into the other jack on the front and both jacks behave the same: any audio device plugged in will only play on the right side, no sound on the left, however when the cable is in the headphones jack, i can move it and i always hear sound, but when i move it around in the SPDIF jack, it cuts out when you move it. still no sound from the laptop speakers.
    I thought it was a driver issue, so i updated the drivers and even reformated the entire computer. This did not work. I have read around and noticed that some people say a tab may be stuck in the jack and to try and plug something in and out of it rapidly and that should get it to recognize that nothing is plugged in, however that also did not work.
    Just curious if there is anyway to shut off the spdif connection and maybe it would allow the speakers to work again, since that seems to be the jack with the issue, or if there is any other way of solving this issue.
    Thanks, Mike.

    Anyone? Really cannot find any info on this problem..

  • No sound from built in speakers but headphones ok, pavilion dv6

    HI all,
    Out of a sudden , after watching a youtube video, my speakers and headphone gave  noise when I was RE playing the video that I watched seconds ago.
    I restarted my lap, and then didn't hear a sound at all
    checked my drivers and updated them
    the headphone is working fine. but when I unplug it I hear no sound from my built in speakers. though the drivers are working fine.
    took my lap for maintenance to get it cleaned up and checked, they told me the speakers are connected and the wires are all fine! but the problem still exists.
    they wanted me to leave it with them to be checked ... but I just didn't trust them since they suggested the sound card is damaged! if it was dagamed I don't think I'll be getting any sounds ! right ?
    please, can any one tell me what could be the problem ? and how to solve it ?
    Pavilion Dv6 3120
    running windows 8.1 for the past year

    Hi Chaand,
    You can try installing this IDT High-Definition Audio driver, it is not for your model but it is a Windows 8.1 driver. There are no Windows 8.1 driver for your model. If installing that driver doesn't work then it is a most likely a hardware issue with the speakers and you should have either a local technician take a look at it or send it to HP for repairs. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • How does one reestablish no sound from either internal or external speakers in iMac 10.6.8?

    All of a sudden I have no internal or external speaker output from my iMac 10.6.8.  I've tried to reset permissions and rebooted computer with no effect.  Can you help please?  Vic

    Repair permissions & restart.
    Check your settings in the Audio Midi app which is located in the Utilities folder.
    http://support.apple.com/kb/TS1574 Troubleshooting issues with no audio from built-in speakers on Macs
    Trick/Tip:  Open up GarageBand if installed then, open a program (optional).
    Quit out of the GarageBand app.
    =====================
    Repairing the mysteriously muted Mac
    The background on the issue is that there’s a small sensor switch inside the headphone port. When you insert a headphone jack, the sensor understands what's what and changes the sound output setting to Headphones. If you insert a jack for digital audio output, the device changes to Digital Out. When you remove the jack completely, it should read Internal Speakers.
    The spirits tell me that there’s a very good chance that you recently had something jacked into this port—a set of headphones or a cable leading to powered speakers, for example. When you removed the jack, something in the port prevented the sensor from tripping correctly. That’s why you see Digital Out instead of internal Speakers.
    The solution is to force the sensor to do its job. The safest way to do that is to simply run a jack in and out of the port a few times. Much of the time, this takes care of the problem by correctly tripping the sensor. If that doesn’t work, there may be gunk in the port. Before turning to more invasive techniques, get a can of compressed air, attach the small tube that fits the nozzle, and blast a few shots of air into the port. With any luck, that should dislodge the gunk and the port will operate as it should.
    If that doesn’t work, find a foam-tipped swab that fits (electronics shops generally carry them), dip it in rubbing alcohol, and gently insert it into the headphone port in an attempt to wipe away any stubborn gunk. I recommend foam rather than cotton swabs because the cotton variety might leave threads behind. (This same technique works well with misbehaving headphone ports on devices such as iOS devices.)
    It's possible that gunk has nothing to do with it. Rather, it may be that the switch just needs a subtle nudge. If a jack or swab doesn't work, I've heard of people successfully resetting it with a deft poke of a toothpick.
    http://www.macworld.com/article/2031146/repairing-the-mysteriously-muted-mac.htm l

  • My itunes will not pick up my ipads when i put it into the usb ports...???

    Hi all,
    I'm having a problem where neither of my ipads are being picked up by itunes when they are pulgged into any USB port.... They used to only 3weeks ago...
    The only thing i have done is purchased an Ipod of ebay, and loaded music on to it....  i have only just found out the ipod is  still registered to who ever had it before....
    Is this the problem and any ideas how to solve it guys....?

    Two separate problems.
    For your iPads, try going into the control panel, add/remove programs. Uninstall iTunes, Apple mobile device service, Apple application support. then redownload and reinstall iTunes
    See if it sees your ipad now.
    For the iPod, what you've run into is the activation lock. It's a new feature of iOS7 where an owner's apple ID is needed to wipe a device. If the ebay seller cannot or will not give you that apple ID, contact ebay and return the iPod. There is a very good chance that your ipod is stolen (or at the very least not the seller's to sell).
    If you can't unlock it, you've bought a brick so get your money back.

  • Sound from speakers as well as headphones after bios update in pavilion g4 1121 tx laptop

    Dear madam/sir
    after performing a bios update as sugested by hp support assistant I am getting sound from speakers as well as earphones .I stay in a small town and there is no hp centre nearby .I am a student staying in hostel where i cant play sound through speakers as it disturbs my room mates .Kindly assist .
               product details
    product no  ; QB404PA#ACJ
    product : hp pavilion g4 1121 tx
    purchased : sept 2011
    Thank You

    Hi @satyakam 
    Welcome to the HP Support Forums!
    I understand that you are enjoying your sound  from everything today. I am happy to help.
    If you have a sound application installed along with your sound driver, then I would check the settings for the speakers and headphone in that application.
    Then I would make your headphone the default device when it is plugged in.
    To make headphone as the default device
    1.    Click on Start; Go to Control Panel.
    2.    Click on Sound.
    3.    Switch to Recording.
    4.    Select your microphone/headset as the default device.
    5.    Save the changes by clicking on OK.
    Also you can Uninstall and re-install your audio device drivers, to do that:
    1.    Click on Start; in the start search type “devmgmt.msc” without quotes and press Enter.
    2.    Expand Sound, Video and Game controllers.
    3.    Right click on the audio component and then click uninstall.
    With the driver uninstalled then download and re-install the driver from:
    HP Pavilion g4-1121tx Notebook PC Drivers
    Just be sure to select the correct operating system from the drop down, and click next, which will refresh the list of drivers below.
    Let me know if that helped at all.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for