My ipod classic has decided to become corrupt, will not sync etc. Tried all of Apple's troubleshooting tips but nothing works. It is an 80GB classic which has been well looked after. what could of caused this and how can i rectify?

help!

These are also in the Troubleshooting tips, but it works for me.
What system are you using Mac or Windows?
a. If Windows. run Chkdsk drive: /F
b. if Mac run Diskutilty -> CRC
     Click on the iPod device
     select FirstAid tab on the right window.
     click on the first Aid Button.
Then connect to iTunes and Restore.
Good luck.

Similar Messages

  • Songs that are imported manually from cds or flash drives are randomly deleting from my iphone 5. Sometimes I get an error -54 message first. Sometimes not. What could be causing this and how can I fix it?

    I have an iPhone 5 16g ios 8.2 and it keeps randomly deleting the songs I manually put on from cds or flash drives. The songs I purchased from iTunes don't delete just the ones I manually add. It has happened three times, once after I added 399 songs, once after I added 27 songs and once when I added 45 songs. Sometimes an error (-54) pops up but not always, it's just in an instant all the songs I put on are suddenly gone. I have uninstalled and reinstalled iTunes three times, reset all the settings on my phone and also restored my phone to factory settings. Nothing has worked. I have a 4th generation iPod and I have never had this problem. Any and all suggestions/help would be greatly appreciated. Thank you.

    x0SiN0x:
    Welcome to Apple Discussions..
    My first suggestion is to Repair Disk. Here's how:
    Insert Installer disk and Restart, holding down the "C" key.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel, and report)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    Please post back and let me know how that goes.
    Here are a few links that may help you to identify the issues:
    Resolving Disk, Permission, and Cache Corruption
    Tuning Mac OS X Performance
    Mac OS X System Maintenance
    Please don't hesitate to post back should you have further questions or comments, or with update.
    Good luck.
    cornelius

  • The sound has been working fine until now. I turn the volume up but no sound. What could be causing this and how do I fix it? Thanks so much.

    The sound has been working fine until yesterday. I turn the volume up but no sound. Not while playing games or with key taps. What is causing this and how can I fix it? Thanks so much.

    I did a search for "no sound" and found the solution. Thanks for the info.!

  • My Apple G5 using operating system 10.6.8 keeps locking up. I get no warning or error message. I do get some intermittent screen distortion. Any ideas as to what could be causing this and how i get rid of this problem? Complete system re - install? N

    My mac keeps locking up it s Power mac G5 Intel using 10.6.8 OS.X. I get no warning or error messages it just locks up and the only way to get it to work again is to depress power button and restart. Its random intermittent and incredibly frustrating. I do get some screen distortion from time to time and wondered whether it may be a graphics card issue or whether it could be solved with a complete system re-install and OS upgrade?

    According to everymac.com, your Mac came with Tiger, 10.4.x and can't go any higher than Lion, 10.7.x.
    It would have come with gray, machine specific disks. Since there's no reason to install 10.4.x first, and then Snow Leopard over that, just purchase a retail copy of Snow Leopard for $20. What you won't get with the retail version of SL is the iLife suite (Garage Band, iDVD, etc.) that were on the original bundled disks, but you can purchase iLife on Amazon pretty cheap, and get newer versions besides.
    When you get Snow Leopard, you can boot to the DVD, erase the drive and install everything clean. Hopefully, you issue is only software, and not hardware related.

  • The icon "pesonal hotspot" keeps disappearing om my iphone.what causes this and how do i rectify it?

    the icon "personal hotspot" keeps disappearing on my iphone,what causes this and how do i rectify this?

    Here is Apple's latest response to the FaceTime issue that cropped up last week:
    FaceTime 4-16 Issue
    Folllow the troubleshooting steps to try to resolve your issues.
    Cheers,
    GB

  • I had quite a few notes in the 'Notes' app. I suddenly find that all of them, except 3 have disappeared. What could be the reason and how can I get my notes back?

    I had quite a few notes in the 'Notes' app. I suddenly find that all of them, except 3 have disappeared. What could be the reason and how can I get my notes back?

    Not fully au fait with iCloud. I don't use it. But if you have done a backup to iCloud then this might help. This reply will refresh your post thereby giving others an opportunity to comment. Meanwhile, read up about iCloud in the User Guide. Here's the link to download it - http://support.apple.com/manuals/#ipad

  • It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

    I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • My imac keeps giving me a spinning color wheel and hangs up the machine for a few seconds and sometimes minutes. What could be the program and how can i get rid of it?

    My imac keeps giving me a spinning color wheel when i open and close applications and also when I am typing in programs. It happens and spins and then releases. I have done the following: Run virus software and found no problems, I have reinstalled the operating system, I have reloaded Iworks software, I have checked system prefrerences and still the problem continues. What could the problem be and how can I correct the problem?

    "the spinning wait cursor is displayed automatically by the window server when an application cannot handle all of the events it receives. If an application does not respond for about 2 to 4 seconds, the spinning wait cursor appears."
    read how to troubleshoot: http://www.macworld.com/article/151583/2010/05/spinningbeachballofdeath.html

  • My father was prompted to download an 'update' which appeared randomly while on his ipad2. since then the screen shows an itune icon and plug. Access has been restricted ever since. is that a virus? and how can he rectify it?

    My father was prompted to download an 'update' which appeared randomly while on his ipad2. since then the screen shows an itune icon and plug. Access has been restricted ever since. is that a virus? and how can he rectify it?

    No, it is not a virus! Not every unexplained occurrence in life is a virus. Microsoft has a lot to answer for by brainwashing users if its operating systems into thinking anything unusual must be the result of a 'virus'.
    It was most likely the recently released iOS system software update that for whatever reason did not complete.
    Follow these instructions to fix: http://support.apple.com/kb/HT1808

  • Hi, my MacBook Pro has become very slow... what could be causing this and what can I do to fix it?

    Hi, my MacBook Pro is working very slowly.. what could be causing it and what can I do to fix it??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Firefox4 freezes on startup after about 10 seconds. A second parallel instance of firefox works normally as long as the first instance is left alone frozen. What causes this and how can it be prevented?

    I am running firefox4 on win XP. When I start firefox, it says it is trying to restore a previous session which has only the blank tab. After about 10 seconds the whole instance of firefox freezes - none of the buttons work and the only way to close firefox is to use the Ctrl+Alt+Del and task manager. If I open a second parallel sessionof firefox, it works normally, as long as the first session is left alone (frozen). What could be causing the freeze up of the first firefox instance, and how can it be prevented?

    I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
    It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
    Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
    Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
    Dual 1.8 G5   Mac OS X (10.4.3)   1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

  • IPhone turns off often, turns back on only after reset, tried all troubleshooting and still nothing. Does anyone know what could be causing this and any ideas on how to fix it?

    My iPhone 4s shuts down at least once a day, usually after I used it or when I'm not using it at all. It will not turn back on unless I reset it (by pressing home/power buttons) and when it turns back on, it runs like nothing happened. I have tried everything I can think of, update iPhone software, iTunes software, troubleshoot on Apple's Support page and reading other user's issues but I haven't seen anything similar. I erased and restore factory settings several times, made different backup attempts and even restored from recovery mode with iTunes. Everything goes great, no error message or anything unusual, until phone is off again, very frustrating. It doesn't seem to have a pattern to it, it happened when no apps were running as well as when a few apps were. The only thing I can think of is I haven't seen this happening when charger cable is plugged it. I don't really care about apps and content on the phone, but my contacts and voicemails are the only reason why I absolutely have to restore from backup, even after setting up a new phone, from iTunes. Other than that phone is brand new, battery is also great, nothing wrong with it (apparently).
    I would like to know if somebody knows what this could be, and any ideas on how to fix it. Thank you.

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • After a PRAM reset my MBP 1,1 display is split into 4 parts each displaying the same image. What is causing this and how can I fix it?

    After resetting the PRAM/NVRAM (control, option, P, R) on my Macbook Pro 1,1 (2007) running 10.6.8 The screen is now split into 4 parts, each displaying the same thing. The screen immediately appears this way at the first grey screen, however if I do another NVRAM reset, upon restart after the second startup chime, the screen is normal but once it gets to a certain point around thetime the cog stops spinning, the screen flickers, turns blue and splits into four again.
    Another thing is when I tried using the Apple Hardware Test I couldn't read the instructions as the resolution was too small, but once I restarted and change my display resolution in System Preferences, the resolution was readable in AHT. I assumed the System Settings were loading when the OS had booted and that AHT runs without any of these settings (if that makes sense?)
    I've not used any third party utilites and everything working fine except for some battery issues which are gone now (the reason I tried the PRAM reset)
    Any help would be much appreciated

    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Mac randomly crashes, screen turns green and white, and it works fine upon restart. What causes this and how can I fix it?

    My MacBook Pro 13 inch (I've had it for about a year and a half) has started crashing randomly. It happens about once a week and it will happen when I'm in the middle of either watching a video, typing a paper, playing a game, etc. The computer clicks loudly and the screen becomes a series of green and white lines. It works fine upon restart, but it's still annoying whenever it happens. What causes this? Is it fixable?

    The image suggests an issue with the graphics board.
    The issue may happen more when your machine is generating additional heat, as when you're watching or processing video, or gaming. I can't say for certain, of course, but certain things will reduce the chance of the problem recurring:
    1. Keep your machine as cool as possible. When there's additional heat, turn up the fan, or use an app like HD Fan Control to reduce the heat. Use your computer the way you see fit, but be conscious of heat.
    2. Back up on a regular basis. Logic board problems can lead to more serious issues down the line, so backing up is a good way of safeguarding your data.
    3. Look up "Logic Board Woes" on Google for a comprehensive discussion of the issue.

  • When I tried to shut down my IPad( by sliding the red bar) the spinning gear started spinning and it won't shut down. The gear has been spinning for 18 hrs now. What is causing this and how can it be fixed?

    When I tried to shut down my other Ipad(by sliding the red bar) the gear symbol started spinning but it won't shut down--the gear is still spinning 18 hrs later.

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

Maybe you are looking for

  • What's the report to see the result after we run KSUB ?

    Dear All, Could you kindly help me ? I'm new for FI-CO . If i'd like to run assessment, and in the cycle I use Receiver Rule: Variable portion and type is Plan SKF . The sender will be cost center and receiver is WBS Group. Afterward, I run KSUB to r

  • How can I keep track of ans of quest ???? [Struts]

    hi, I am trying to develop Question-Answer pages using struts. The problem is when user selectes the right option(radio button) of different different quest. how can i keep track of these selected radio buttons ??? I mean how can i trace the value of

  • Oracle 11g - Listen for remote connections

    Hi all, I recently installed Oracle 11.1.0.7.0 on a Windows Server 2008 standard server 6.0 service pack 2. Everything is working as it should. I can open the database control web page on the local computer. I can connect locally to the database from

  • Opening PDFs in emails and on my computer

    I thought when I bought this program that I would be able to open PDFs that come in emails and that are on my computer. I can't open any of these. Help! I'm desparate! Debra

  • Insert Error: Column name or number of supplied values does not match table definition.

    I'm getting this error when I try to run my stored procedure, I have checked that the inserts matches the select, which seemed to be the issue for most of the time this question is asked. As far as I can tell they match so something else must be wron