My iPod Classic just shows the apple
Broken. iPod Classic just shows apple. Then tells me to go to support. Red x n circle.
Bring it in to Apple for a checkup, most likely the battery is near dead, or your charging cable is damage.
Can you get another USB cable, and connect the iPod to a High Power USB 2.0 port, and leave it charging for 4 hours (The charging sign (lightning) must be ON the iPod display)
Do not connect it to any USB Hub, as these don't provide enough power for iPod charging.
After fully charging the iPod, do the disk diagnostic to see the condition of the Hardisk. refer to this post by tt2.
https://discussions.apple.com/message/17028567#17028567
Good Luck!
Similar Messages
-
My first generation ipod touch just showes the apple on the screen. It seems frozen. Can someone tell me how to fix this?
Try a hard reset and go from there.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore -
Help, my ipod touch froze up, it showes the apple icon only, tried to restore and download but nothing.
Try here:
iOS: Not responding or does not turn on -
my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
HT201263 why does my itouch just show the apple logo and nothing else?
i went into my settings to restore all data and content, and it said it might take up to 4 hours so i let it do that and when it finished it just showed the apple logo when i restarted my itouch, i can reset it any time but itll just stay in the apple logo screen, and i tried restoring my itouch but it said it wouldnt let me for some reason. what do i do?
Because the iPod is sick.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My daughter Nano just shows the apple logo and that is it can'y do anything with it.
My daughters Nano just shows the apple logo and that is it we can not do any thing with it.
Have you tried a reset ? Press and hold both the sleep and home buttons for 10 to 15 seconds and see if it then reboots - you won't lose any content, it's the equivalent of a computer reboot. If that doesn't work then you might better help in the iPod forum (this is the iPad forum)
-
My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
TS1363 Iphone just shows the apple and blinks on and off.
Iphone just shows the apple and blinks on and off.
Hello grumpy48,
The article linked below details a number of useful troubleshooting steps that can help restore functionality to your iPhone.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
My ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
my ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
If you can help me facetime me at [email protected] or msg me.It would help to know whether it ever did work, or is this a new iPad for you? If new, you need to connect it to a Mac/PC that's running iTunes in order to register and initialize it. If it used to work, try doing a reset.
-
helpppp
I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?See if this helps: http://support.apple.com/kb/TS3694#USB
If it does not help, the drop probably damaged something inside the phone. -
My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?
You may have to restore your phone to correct the problem.
-
i updated my iphone 4 to ios 6.. when it finished.. my iphone kept blinking just showing the apple logo.. i connected it to my itunes it didnt read.. help!
Follow the instructions here > http://support.apple.com/kb/HT1808
Note: You may need to try it several times to get it to work. -
My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
My ipod2 will not restart it just shows the apple sign
My ipod2 will not restart it just shows the apple sign
Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.
Maybe you are looking for
-
Posting of PF related amounts to Accounts
Dear Consultants, While posting payroll results to accounts, I observed that all PF, Pensions, EDLI related amounts are multiplied by 100000. I know that as thses values are very small, for sake of accuracy, they are multiplied by 100000 during calcu
-
How do I authorize iTunes on a macbook with iTunes 2013 not 2011
I cant find out how to authorize iTunes on my macbook with iTunes 2013
-
Exporting a system with NW2004s - r3load option do nothing !
Dear colleagues , exporting an ABAP database based on NW2004s on Linux/oracle 10 on linux suse on IA64 do noting .This export is a part from unicode conversion for Solution Manager 4.0 - oracle 10.2 , linux suse 9 on IA64 , export phase after unicode
-
International characters input
Hi all, I am facinf a small problem here. I am using JSP and servlet to input some data to a webpage. But the problem is that if I chose any other character set other then UTF-8 on the web page encoding all the special characetrs simply disappear. By
-
Hello, I am trying to query an XML which is stored in XMLTYPE datatype column in oracle table. I am using the below SQL: select EXTRACTVALUE (column_name, '/Person/Customer/Customer_First_Name'), EXTRACTVALUE (column_name, '/Person/Customer/Customer_