My ipod classic locks up itunes and displays "no music" help!
this all happened after i upgraded to the newest version of itunes.
so far, ive tried uninstalling and reinstalling itunes and resetting the ipod, but no go.
i know i cant be the only one hanging onto a 2008 ipod classic 80gb.
can anyone offer some words of advice?
Hey mryanrichey,
If I understand your question correctly, it sounds like iTunes is not showing any content after updating. I believe your symptoms may be related to those outlined in the following resource:
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If the proposed solution does not resolve your issue, you may want to refer to the following article:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M.
Similar Messages
-
CAN I CONNECT MY IPOD CLASSIC TO ANY COMPUTER AND UPDATE ANY MUSIC THAT I HAVE PURCHASED FROM ITUNES ON MY IPAD?
Plug the iPod into the new computer. When it pops up on the left sidebar, right-click on the iPod and select "Transfer Purchases". Make sure that you Authorize the computer to play content purchased with that account, or else the music will not play.
-
Ipod classic 80 freezes itunes and won't work
upgraded itunes to 10.1 (etc). plugged in formerly operating ipod classic 80. it showed up in the device list,. but i could not move the cursor off music. had to use ctrl-alt-delete to close itunes.
ipod would not disconnect. tried to disconnectg by clicking on eject media (i'm using windows 7), but nothing happened. was forced to disconnect ipod the wrong way- by pulling out the usb, and only then did uit say- ok to disconnect.
itunes then unfroze.
removed itunes following apples list of how to do it. reinstalled itunes.
reset ipod. started itunes. music plays in itunes. plugged ipod in. it showed up in the device lisiting, but i was unable to left click on it. (however- it trid to sync this time - but i got message that said 'the ipod "jose L morales's iPod" cannot be synced. The required file cannot be found. (and no option but OK)'This time when i right-clicked on the ipod lising, it let me click on eject ipod.
i clicked- it didn't disconnect.
now i have ipod with no music and can't put any music on it.
any suggestions.
and yes- i installed the 64 bit itunes in the 64 bit program filesactually thats what i tried- but on a computer running itunes 9.
plugged ipod i. it would let me transfer music from itunes to ipod (in disk mode), but when unplugged the ipod did not retain the music.
so restored it, and downloaded updated ipod software (not itunes software.
seems to be working now.
(i hope)
jess -
my ipod classic 160gb stopped playing and has a lock at the top of it. none of the functions work and it won't sinc to itunes. my computer doesn't recognize it and showed a message of "windows has stopped this device because it has reported problems (code 43)". any suggestions?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
I have iPod Classic in Disk Mode and what do I do next cause it's not showing up in iTunes?
Does the iPod appear on your desktop as an external hard drive? Has the iPod ever successfully connected before? Disconnect your iPod and reset it using the Select (Center) and Menu button combo. Then reboot your Mac, open iTunes, and reconnect your iPod to a high powered USB 2.0 port and see if it's recognized.
Have you worked through all the troubleshooting here?
iPod not recognized in iTunes and Mac desktop
B-rock -
My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.
Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.
-
When i connect my iPod Classic 160GB to iTunes, i iPod locks and i have to reset it inside the docking station. Then all works perfectly. Itunes and the Classic are the newest versions and firmware.
Whats wrong with my iPod?Still noone with an idea about it?
-
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA -
I have a ipod touch that has been locked by itunes and itunes says i must reset the ipod to unlock it. Is there a way to back it up on a hard drive or icloud before I reset it or avoid reseting it all? thanks
If you previous synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.
Otherwise y have to erase the iPod
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
First my ipod classic 120gb on itunes had an error in the capacity I was saying N / D, I changed the drive letter to "O:" and now locks the pc and not let me do anything. What can I do? if now I can't change it again?
Shutdown your PC.
Disconnect the iPod
Restart the PC
Launch iTunes Manually
See if iTunes can play songs normally, or else re-install iTunes.
If iTunes is ok.
Close back iTunes, if it is open.
Connect your iPod to a USB 2.0 port at the front of your PC, do not use any USB hub and disconnect all other USB devices.
Restore iPod software. -
Hi, do you know how can I upload inelegible songs from itunes to Icloud. They are songs added from original CDs. Another question would be how can I transfer all the music I have in my Ipod Classic to my Itunes or ICloud as I want to back it up.
Depends on why it's ineligible. If it's under 96 Kpbs, try right-clicking on the file and choosing Create AAC Version. (If you don't see this option, go to iTunes>Preferences, click "Import Settings..." then choose "Import Using: AAC Encoder" and "Setting: iTunes Plus".) Then rescan your library to see if this version will add to iTunes Match. Or, after changing your import setting, just re-import the song to your iTunes library.
If the song is over 200 MB you would have to reduce it's size to make it eligible. -
How do I make my iPod classic work with iTunes 9.1
How do I make my iPod classic work with iTunes 9.1?
You are correct in some of your assertions, Limnos but, if I were to follow Apple's wishes, I would have to purchase the latest and greatest Apple product every month! I refuse to do that. I understand that my G4 is old but, it does what I need it to do. To answer your question though, I purchased the iPod classic as a refurbished unit, about 5 years ago and had it replaced three times, since then so, there is no way for me to know how old it is.
From my knowledge of how the Classics work(which is extensive.) It is basically a hard disk. There should be of performing a low level format, plug it back in and the G4 should recognize the ROm and automatically search for the correct software associated with that version of iPod and load it but, Apple will most likely no longer carry the software on their servers anymore!(surprise,surprise.) -
IPod Classic "Verifying" Makes Itunes freeze
Well since the itunes 9 update or whatever whenever i plug in the USB cord to my ipod (not just mine I've tried all my friends) my itunes freezes up; but when i unplug the USB coord from the ipod itunes stops freezing and runs normally. So i cant even add songs.
any solutions?I am having a similar issue, for about a week or so (first major ipod issue in almost 2 years). When I plug in my ipod classic, iTunes freezes/ gives me the spinning beach ball. This lasts for about an hour, during which time itunes is unusable. After an hour or so, the ipod is recognized by itunes and syncs properly.
I have re-installed itunes, used older versions, created a new library, and restored my ipod.
My iPod works fine on other machines, and other ipods seem to work on my computer as well. The issue seems to be unique to my ipod/computer account combo.
Apple Genius Bar was able only to confirm that my iPod seemed to be functioning normally, and perhaps I had a corrupt library (I don't, as the problem persists with a new library).
If anyone has any advice on what could be the issue (a corrupt user/system file hidden somewhere?) it would be greatly appreciated. THanks -
my iPod classic has stop working and when ever i try to synch it there is a alert saying that do not disconnect it and there are some songs which when i try to play the iPod re-starts again so please tell me what is the issue and some sound is comming from the back pannel .
so please do something about it and give me the solution
thank you,
Saajan jainTo give you something, I need something too, like
How old is the Ipod? (if it is still under warranty, then send it to Apple service shop)
Are you running Windows iTunes or Mac iTunes?
What do you see on the iPod screen?
My guess is, your iPod classic is more than 2 years old and out of warranty, and the hardisk has gone kaput! and need to be replaced.
Have a nice day! -
How do I put ipod classic contents onto iTunes without losing what's already on either?
How do I put ipod classic contents onto iTunes without losing what's already on iTunes?
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock
Maybe you are looking for
-
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "startin
-
IPhoto crashes when connected to iPhone
I am trying to connect my iPhone to my computer to move photos and videos onto the computer. I am using iPhoto to do that. I have downloaded all the latest updates. iPhoto is crashing everytime. Now I cannot reboot my iMac.
-
Been experimenting with some animations using Wallaby to convert flash to HTML. Successfully published a test folio. Happy days, it behaved until I showed a client when the wifi on the iPad was disabled and bad times, the animation had stopped workin
-
What is the best way to capture RGB8 image to memory for later write to disk?
HI- I have been using the code below for some time now but wonder if an expert can take a look and let me kown if there are ways to improve it. Problem I run into is that I preallocate the memory beforehand (camera.buffering[]), and with a 5 MP came
-
FM to convert the date in to the format in SU01
hi, will u pls suggest the FM to convert the date in the format presented in SU01->Defaults. with respect to user the diffrent format may stored in the su01. kindly suggest. thanks.