My ipod classic operates normally EXCEPT the printing on the screen (i.e. the menus incl. playlistss) has disappeared. Any solutions?,

Hello engine351,
I would start with restoring your iPod classic by putting it into Disk Mode. Once you have that done, you should be able to restore your iPod in iTunes and then start the sync again. Let me know if this works out for you.
Putting iPod into Disk Mode
http://support.apple.com/en-us/HT203585
Restoring iPod to factory settings
http://support.apple.com/en-us/HT201540
Regards,
-Norm G.

Similar Messages

My ipod classic comes on but just a blank white screen whats the problem

my ipod classic comes on but just a white blank screen what is the problem

Gloria,
If none of the 5 R's resolve the issue, it's likely that your iPod's display is damaged and needs replacing of the ribbon cable for the display that connects to the logic board has come loose or is damaged. Either way your iPod will need to be serviced in order for it to regain full functionality.
Here are the 5 R's.
http://www.apple.com/support/ipod/five_rs/classic/
B-rock

My ipod classic will sync with my itunes and it shows me all the songs have been downloaded. however when i disconnect it i only have 50 songs present on my ipod. in the settings it still tells me 15 GB is being used up. what do i do?

my ipod classic will sync with my itunes and it shows me all the songs have been downloaded. however when i disconnect it i only have 50 songs present on my ipod. in the settings it still tells me 15 GB is being used up. i have dowloaded nothing onto it but music. i cant find the rest of my songs on it. what do i do?

Restore the iPod.
tt2

I Have a Ipod Classic that all my music is on. After my previous computer crashed I have not had any of my music able to be transfered to the new computer from the Ipod. Is there a way to do this

I Have a Ipod Classic that all my music is on.
After my previous computer crashed I have not had any of my music able to be transfered to the new computer from the Ipod.
Is there a way to do this?

Unfortunately, unless you have a backup and can restore the iTunes library to the new computer, you are stuck with the current state of the iPod. This is one of those things that makes doing backups so important.
Unless your music is all purchased from iTunes (not from your own CD's that you imported into iTunes and then downloaded to the iPod), you will be able to re-download all your iTunes store music back to the iPod when you install iTunes on the new computer. When you first attach the iPod to the new computer and new iTunes the first time it will tell you that this iPod is synced with another iTunes library and let you initialize the iPod (which will erase everything on the iPod - so don't do this unless you don't care about the stuff on the iPod now).
I've seen 3rd party apps in the past that will let you copy music/content from iPod to computer and bypass iTunes, but not sure if they still exist as this was several years ago.
good luck

I wiped my ipod classic and then my computer crashed, so i no longer have the songs i purchsed from itunes on my ipod or computer! I have a new computer now with itunes installed, can I get the songs purchased previously from itunes somehow?

I wiped my ipod classic and then my computer crashed, so i no longer have the songs i purchsed from itunes on my ipod or computer! I have a new computer now with itunes installed, can I get the songs purchased previously from itunes somehow?

Yes, you can!(:
STEP 1: Open iTunes
STEP 2: Navigate to the "iTunes Store". It can be found under the "STORE" tab.
STEP 3: On the right side of the store there should be a "Quick Links" Section. Click on the "Purchased" link.
STEP 4: Navigate to the "Music" tab and click on "All Songs". Then at the bottom of the screen there will be a button that says "Download All". Click the button and your songs will be begin downloading!
NOTE: This will only work with songs that you bought from the iTunes store, if you imported them from a CD, you will have to do it again.
NOTE: You can also do this with Apps, Movies, TV Shows, and Books.
NOTE: You may have to sign in with your Apple ID to verify the download.
Hope this helped! Enjoy your music!(:

The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I have!

The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I just got!

First off, I would STRONGLY suggest that a external hard drive would make you life much easier by at least being able to back up your songs on the external drive for when you need them. Even if you don't want them in the iTunes library, you can have them all ready on the external to be re-added as needed. You can get 100's of gigs for under $100 shipped.
Anyway, since you used Yamipod, are all the songs back on the computer? If so, I would go ahead and restore the iPod, let iTunes then resync everything back to the iPod, then switch it back to manual and see if the restore and resync clears up the issue.
Patrick

I can't connect my iPod classic to iTunes, it just doesn't react when I put the USB into the PC

hey, I have an iPod classic and it can't connect to iTunes.
I put the USB into my computer trying to add music, but it doesn't seems to react.
It DOESN'T say that it can't recognize the Ipod..
- Itunes just simpely doesn't react when I put the USB-cabel into my computer.
- when i go to the task manager the "apple device mobile" and "ipod service" is acitve in the processes
- I've tried to restart my computer (windows XP)
- update iTunes
- reinstall iTunes
- restart my apple devices mobile manager
what I think is the problem (which I can't solve) is that iTunes doen't even react to the USB
plz hlp me!
- ps it really should be able to add music to my iPod without getting help from a expert.

Hello qz0rz213,
It would seem that iTunes has encountered or developed an issue in the process of trying to sync photos to your device. The best place to start would be removing the iPod Photo Cache (thus allowing for a new version to be created).
Note: Deleting this folder will not remove the original images from your library.
iTunes: Understanding the iPod Photo Cache folder
http://support.apple.com/kb/TS1314
If the issue is not resolved by removing the iPod Photo Cache, the following article goes into further steps that can both help you determine the source of this trouble and eliminate it.
Symptoms
In certain situations, iTunes may display an alert or may be unable to sync photos to an iPod or iOS device. Examples include:
After updating iOS, iTunes displays an alert that there is not enough room to sync photos
This error appears: "The iPhone/iPod touch '[device name]' cannot be synced. The required file cannot be found."
This article outlines steps to resolve these issues.
iTunes: Unable to sync photos
http://support.apple.com/kb/TS3697
Cheers,
Allen

I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restore bcause there are files that are used by other application. I am having Widows

I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restored bcause there are files that are used by other application. My iPOD appears in My Computer in drive H as a mass storage generick volume

Try disabilng the Enable Disk Use option from under the iPod's Summary tab, applying the changes, and seeing if that helps.
Otherwise, temporarily disabling any antivirus, security, firewall, or file indexing software that may be running on your system and then try restoring your iPod again.
B-rock

I have an iPod Classic that belonged to my late wife how do I change the listed owner?

I have an iPod Classic that belonged to my late wife; how do I change the listed owner?

Camariotti wrote:
I have an ipod classic that has more music then my computer how do I sync the music from my ipod back to my computer?
-> Recover your iTunes library from your iPod or iOS device

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync.

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not sync more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync process. The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack. Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause. The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that. Your advise would be enthusiastically received.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution.

Dear sir,
I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution
Yours faithfully
Vineesh

Hello Vineesh
Try out the troubleshooting assisting below to get your iPod Classic to start syncing again properly.
iPod classic Troubleshooting Assistant
https://www.apple.com/support/ipod/five_rs/classic/
Regards,
-Norm G.

How can I get all the print on my screen to be larger?

How can I get all of the print on my screen to be larger?

Thank you for helping me with the size of the print on my screen. The suggestion you made works well with the email font. I really wanted all the print on my computer to be larger. (Some of the print seems to be way too small.) Someone suggested I change the resolution settings. I did this, and changed it to 1024 X 640. That changed the size of the font on the toolbar at the top of the page, and that is what I really wanted, as well as all the other print on my screen. Nonetheless, I would like to thank you for your very helpful and prompt reply to my question.
Sincerely,
Wayne10

I just bought a new printer for my iMac version 10.7 but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!!

I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!

I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!

HT4356 I got a new wireless modem. The HP 8600 no longer works and is not seen as an airport printer. The diagnostics on the printer say it is connected to the wireless.

Suddenly no wireless printing works. The printer is a HP 8600e and the wireless is turned on and the printer itself can connect to the network, but OSX no longer sees it as an airport printer and nothing prints. I've tried all the Apple support docs without success.

An old addage of troubleshooting is "First, fix what you most recently changed."
All the driver uninstall etc, was probably unnecessary.
Power cycle the router (wireless modem).
Power cycle the printer.
Now check that the printer is in the local subnet of the router.
(local subnet means router is something like 192.168.1.1, your computer is something like 192.168.1.2, and the printer is something like 192.168.1.3 - only the last part - 192.168.1.x - is allowed to be different).
Add the printer using the default printer browser window.
If this doesn't work, Reset Printing system and re-add.
http://support.apple.com/kb/PH11143

I need to supress the printing of a blank page if the total for an AR Statement is 0 or null.

I have an issue where the XML file for the R03B5001 AR Statement is outputting records with Header information, (name and address), but the total due for the statement is 0. I have been able to suppress the printing of the header, and detail in my template, but it still generates a single blank page. How can I suppress the printing of this page?

Thanks for your answer. Instead of formatting through FireFox, I had to go in and format it via the printer. Duh! Feel stupid not doing this first. If any one else has this problem, I was able to set it up on the printer by going to Printers > Printer Properties > Printer Preferences and set it up. Good luck and thank you for your reply.

My ipod classic operates normally EXCEPT the printing on the screen (i.e. the menus incl. playlistss) has disappeared. Any solutions?,

Similar Messages

Maybe you are looking for