My Ipod disk can no longer be read

I have a 2nd gen click wheel Ipod. When I bought it, it came with Music Match software and I used it with Windows for years no prob. Now Music Match has become Yahoo Juke Box. Today I used Yahoo to load some of my cds and copy to my Ipod. After 11 tracks of copy, Yahoo Juke Box froze, my Ipod lost its 'do not disconnect message' and I had no choice to reboot. Now when I browse my Ipod itself, it functions, but appears to hold no music. When I browse it via Yahoo juke box, I can see MB used/free info but no track listing. How can I make my Ipod readable again? Any ideas anyone?
Thanks

Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden

Similar Messages

  • TS2771 i was using an app while the battery ran over, then when i recharged my ipod, i can no longer open that app anymore. Why?

    i was using an app while the battery ran over, then when i recharged my ipod, i can no longer open that app anymore. Why?

    No idea why.
    What have you tried to solve?
    Have you tried the basics from the manual?
    restart, reset, restore.
    Have you tried removing the app, tehn adding it back?

  • Ipod touch can no longer tilt while playing Temple Run or Back Breaker Football

    IPOD Touch can no longer tilt while playing Temple Run or Back Breaker Football or any game where you need to control the tilt or turn.

    Managed to finally factory reset the unit (see my other post).
    Should be OK now.

  • I own the very first ipod and can no longer be updated or synced any suggestions to get it back up and running, has just decided to stop 2015

    I own the very first ipod and can no longer be updated or synced any suggestions to get it back up and running, has just decided to stop 2015

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    It could be that the battery has died

  • My iPod Touch can no longer download Podcast Videos after upgrading to iOS4

    After upgrading OS 3.1.3 to iOS4, My iPod Touch (2nd Generation) can no longer download such video podcasts as NBC News, CBS News, ABC News and Cranky Geeks from iTunes store. The moment the download starts, there is always an annoying prompt "this video cannot be played on this iPod".
    It's really frustrating!!!

    Same thing happening to mine also, still cant find a reason.
    Message was edited by: glynn1019

  • Ipod disk can not be read from or written to

    I have updated my itunes software and restored my ipod to the original settings. It still will not let me load any music onto it, including music that was previously loaded onto it. When I tried to reset it, I got a message saying that it was corrupted and had to be reset. The second time I reset the ipod, it worked but I still can't load anything onto it. It's very frustrating!!!!!! Any suggestions? Thank you!!!!!!!!

    Thank you very much for the article link you mentioned. I had looked at that same article and I thought that resetting the ipod would work. I don't think any of the songs are corrupted because they were on the ipod before I had started having problems with it. I can't seem to find any particular song that is corrupted. I have already updated my Mac with the most recent stuff (as far as I know) so I don't think that is causing it either. It had started to copy some songs and then just stopped. It never seems to be at the same song though.
    Thanks so much for your help!!!!!!!!

  • Ipod touch can no longer connect to XP following Apple upgrade, HELP !

    This is a nightmare. My son has an ipod touch (8gb)purchased a couple of months, and it's been fine until a couple of days ago. I downloaded some music for him, and just about to synch when Apple informed me on itunes of a software upgrade, so naturally I did this. However, it could not complete it saying there was a problem installing the hardware. The ipod then had a permanent picture of a usb cable pointing towards the itunes logo. Itunes no longer recognises this ipod or my own ipod as a device.
    I'm not a techhie expert, but I generally know my way around computers, however I could not resolve this.
    I called the Apple technical support desk, where I spent 1 hour 45 minutes with 2 different advisors who could not resolve this. We installed and re-installed various components from drivers to itunes to anti virus software, however nothing could change. There was simply no recognition of the ipod at all when connected.It does give a pop up message to restore the ipod, however you can't actually click on the restore button because to have to get rid of the pop up message first, then the screen with the restore facility disappears.
    Windows xp is continually popping up a message saying " FOUND NEW HARDWARE WIZARD There was a problem installing this hardware. Apple Mobile USB driver. An error occured during the installation of the device. The system cannot find the file specified."
    You then have to click on finish, however the message keeps coming back. We kept going round and round in circles with the technical support people, where it was left that I should start removing programmes on my computer to see if any of those are causing a problem. I have had the same spyware for the last 12 months now and never had a problem before, nor any other programmes.
    I booked a genius appointment at my local Apple store today where the assistant reset the ipod to factory settings so it could at least work. I explained the situation, however 15 minutes was never going to be long enough to look into it, and a restore was all they did. Obviously all of my programmes were lost, however when I got home and plugged it back into the computer again, it could not be recognised by itunes and i got the same pop up message. Luckily we have not spent alot on downloads, however my son has lost his music now and it cannot be connected or upgraded. It's under guarantee however a software upgrade by Apple has totally messed my computer up. I really don't know who to turn to now as both the service support and store has not rectified this, something I feel has been caused by Apple.
    Any advice is appreciated. Thanks

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Problem: DVD-RAM can no longer be read on MBP C2D

    The "MATSHITA DVD-R UJ-857D" in my MacBook Pro C2D is said to have read (but not write) support for DVD-RAM media.
    During the first few weeks of its lifetime, reading DVD-RAMs definitely worked. But now, no more, no matter what brand of media I try.
    All other types of optical media continue to work as advertised (read and write).
    I wonder whether this is a physical defect (but then why doesn't it affect other types of media?) or an issue caused by recent sopftware updates (but when I boot from an external DVD-drive using the very original MacOS DVD with no updates at all, why do I still not get read support on the internal drive?).
    AFAIK there has not been any recent firmware update for this model. So what can be the reason? Should I let Apple swap the drive? Has anyone else observed the same issue?
    Guido
    MBP C2D   Mac OS X (10.4.8)   MATSHITA DVD-R UJ-857D

    Hey Grant,
    thought you'd like to know my "cleaning the lens with a cloth" worked fine - uh... but for about three days only, then back to the same old, same old.
    I'd originally slid a business card covered with a lens cleaning cloth (from my camera bag) to clean the lens, and although the cloth emerged mostly pristine, I figured it must've done the trick as the drive started working again.
    So this time, I decided to go in deeper. I actually took the whole drive apart - case off, drive out, drive dismantled - and I had a long look around to see if any parts looked dirty or damaged...
    I found just one thing - the small silver rod on which the read/write head travels (the servomechanism that moves up and down the disc radius as it reads/writes) had some 'oily gunk' at the point where the travelling-head's 'sleeve' met it -  when I tried to move the head manually up and down the rod, it sort of staggered along. So I cleaned off the gunk with a cotton bud and then slid the drive-head up and down a few times 'till it seemed to run freely.
    Put everything back - and fired up my Mac Pro. And the drive has been 100% fine since then - two whole weeks!
    Maybe this time I've cracked it? (for my drive at least)
    Roger

  • My Iomega external HDD can no longer be read by my Macbook Pro *Please Help*

    The day before my problem began my external was working fine then the next day I plugged it into my mac and now it can't be read. I get a message that says it can't be read with the options to eject, ignore, and initialize. When I click initialize it sends me to disk utility where I see the HDD but it doesn't say Iomega like it usually does instead it says External Raid Media. To make things worse it says it's not partitioned. I can't even verify or repair disk because the options are greyed out. I tried restarting, opening it up to see if it was a physical problem. I don't know what to do any assistance will be appreciated.

    Do a reset.. power off the TC..
    Hold in reset and power on.. keep holding in reset until it flashes rapidly.. if it turns on at all.
    If you bought it in June.. take it back today.. it is broken.. at a guess.
    Some Gen4 are failing this way.. get Apple to replace it.. even if it is a few days out of warranty it won't be much.

  • Windows computer cant sync with ipod. says ipod disk cannt be found or read or located.tried restore says it works then says it didnt then the previous messages

    Any help from someone whos experienced this would be greatly appreciated!Tight budget!! thanks!!

    Do the  Disk Diagnostic as posted by tt2, to check if your iPod Hardisk is in  a bad state.
    It wont fix your problem, but help us in troubleshooting.

  • Dvds can no longer be read on MacPro

    DVD drive used to play Movie DVDs fine  but recently stopped - on inserting a DVD now, machine clicks for a while then ejects the DVD.
    Inserting a CD (music) or data is fine - disc is accepted and available for access.
    Any ideas why just the DVD rejected?

    Hey Grant,
    thought you'd like to know my "cleaning the lens with a cloth" worked fine - uh... but for about three days only, then back to the same old, same old.
    I'd originally slid a business card covered with a lens cleaning cloth (from my camera bag) to clean the lens, and although the cloth emerged mostly pristine, I figured it must've done the trick as the drive started working again.
    So this time, I decided to go in deeper. I actually took the whole drive apart - case off, drive out, drive dismantled - and I had a long look around to see if any parts looked dirty or damaged...
    I found just one thing - the small silver rod on which the read/write head travels (the servomechanism that moves up and down the disc radius as it reads/writes) had some 'oily gunk' at the point where the travelling-head's 'sleeve' met it -  when I tried to move the head manually up and down the rod, it sort of staggered along. So I cleaned off the gunk with a cotton bud and then slid the drive-head up and down a few times 'till it seemed to run freely.
    Put everything back - and fired up my Mac Pro. And the drive has been 100% fine since then - two whole weeks!
    Maybe this time I've cracked it? (for my drive at least)
    Roger

  • The display becomes blocky, and can no longer be read

    Websites develop distortion in both text and pictures, thought it is more noticeable in text. Horizontal lines shift from left to right a pixel or two, sometimes more when it's really bad. i've seen some shift entire letters. this makes it very difficult to read, especially since it more spreads the text than shifts it cleanly. if i highlight the text, it disappears. if i start a new page, it disappears. it seems to inconsistently get worse the more activity there is on the page, or if i scroll up or down. No other program on my computer has this problem, and i checked today that all my drivers are up to date. i also checked for viruses on the computer and in mozilla. i have gone so far as to uninstall and reinstall the program without the problem going away. i have also seen a similar issue in your foums, but have not seen a solution given to that post from 2010.

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I just downloaded the latest version of itunes to my windows 8 pc and now my ipod nano can no longer be recognized by the computer

    I just downloaded the latest version of iTunes and now my computer does not recognize my ipod nano.  How do I fix this?

    Hi jstutsman,
    If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
    iPod not appearing in iTunes - Apple Support
    Regards,
    - Brenden

  • We transferred purchases / synced an iPod touch to a toshiba laptop, and then updated the ipod. we can no longer put the files back onto the ipod. what are we doing wrong]

    we transferred purchases and synced from a iPod touch to a toshiba laptop, after it updated and synced again we have been unable to put the files back onto the ipod. the computer will not let us drag or copy paste files, and when we tried to " export" the library to the documents folder, it only showed up in code.  we have books and music we would like to reload to the ipod.

    Hello Jean164,
    Thank you for using Apple Support Communities!
    It sounds like you are unable to manually put your content back on your iPod Touch.
    It seems like you may need to re enable Manually Manage Music now that the device has been updated, and this article should help with that.
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1535
    Cheers,
    Sterling

  • I used to have I tunes on my pc and have just recently tried to update my iphone and Ipod but can no longer get I tunes to open. Have I lost all my previous downloads

    I have recently been having a clear up on my pc. I have tried to access Itunes which was on my pc but it will not load!! Help

    http://support.apple.com/kb/TS1717
    try this article for launch issues

Maybe you are looking for

  • My database does not start automatically

    i am using windows 2000 server and oracle 9.0.1, my database does not start automatically when i am booting the system. in regedit autostart is there, my service is getting started automatically and i used startmode auto in my oradim command but stil

  • Just wanted to say...

    You're all going to think I'm just trying to curry favor (maybe. maybe....) but I just wanted to thank everyone here who chimes in on posts. SharePoint is a big product and I learn more about it every day, even when I don't want to ;) This has been a

  • Cannot find the picked file in Integration Server

    Hi, I am facing an weird problem like The file is being picked up by the File adapter(we have set the mode to Archive)and succesfully archived.But when i search the same file in IS(SXMB_MONI)the message is not there. In RWB also i could not find the

  • Every morning, in my trash, i have a folder named jaws2602. What is this ?

    Every morning, in my trash, I have a folder named jaws2602. What is this ? Someone can help me ?

  • How do you Control SPDIF input levels in Logic Pro using Apogee Ensemble

    Hello, Question. I have an Apogee Ensemble audio interface hooked up to my Macbook Pro. I have a Motif XS8 that I record audio from through SPDIF. I am able to get sound through to my audio track once setting the inputs in Logic, however the levels a