MY IPOD DO NOT SAY THE NAME OF THE MUSIC ANYMORE. IT SAYS "ALL SONGS".

On a shuffle, "all songs" is the name of the main playlist with all of the songs. If you press and hold the VoiceOver button, it might say "all songs" (plus the list of any other playlists you have on the shuffle).
So make sure you are just pressing (and releasing) the button, not pressing and holding it down.
If it's a 4th gen shuffle, this article has more info about using VoiceOver
http://support.apple.com/kb/HT4322

Similar Messages

My 3rd gen ipod nano is not being read by itunes when I plug it into my mac laptop. It says "no name" on the mac screen, I lost all my music on the ipod itself.

My 3rd gen iPod nano is not being read by my iTunes on my mac. When going to sync, the mac screen says "no name". Also I believe I lost all the music on the iPod. When turned on it says "Welcome" as if it is new. I tried to copy all my music into the "no name" folder and then sync. The iPod said it was "syncing".

So does iTunes see the iPod or not? I couldn't quite understand from your post as you said it wasn't, but then said that the iPod was syncing...
B-rock

I tried downloading a CD (lots of my itunes music is from CDs) and it went as normal but when i downloaded it to my ipod it doesnt say the name of the artist. I've tried everything. It only did this after i downloaded the most recent itunes version

So a lot of my music in iTunes is CDs and recently I was trying to download another CD to it and everything went as normal until I downloaded it to my iPod. So I know that to get everything to match you have to change the names and stuff to get the album to match the iTunes version exactly so that everything will go smoothly and I did that but when I downloaded it to my iPod I saw that it didn't name the artist. Where it should say the artist it says "Unknown Artist". I thought that it was just that particular album but than I tried downloading another album and the same thing happened. I've tried everything. I've double checked to make sure the album matches the iTunes version and it still does it. Everything is fine on the iTunes on the computer. It says the artist and stuff but than on my iPod it doesn't. The album artwork, name of the album, and name of the songs are all there but the name of the artist isn't. It never did this before and it started right after I downloaded the latest version of iTunes so since it happened twice I think it may be a glitch with either my iPod or with iTunes but I thought maybe somebody could help me? I guess it's not important but it really bothers me. Especially since it could be avoided.

Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.

Can I recover the icon saying the name of the presons ipod if I can I can unlock my ipod on my new computer

can I recover the icon saying the name of the presons ipod if I can I can unlock my ipod on my new computer

No idea what you are saying or asking.

I am unable to successfully install itunes 10.5. I can download it, but when I go to install the program it says that a program could not be run and it won't give the name of the program. I have the vista 64-bit system.

I cannot install iTunes 10.5. I can download it, but when I go to install it says that a program cannot be run and it won't give the name of the program. I have the Windows Vista 64-bit system.

That would be my first guess. You might be trying to install the 32 bit version of the program.
Update the thread with more info on your apple software etc if its a 64 bit install you're trying to perform.

How can i delete my music from itunes it dont let me also how to change the name of the ipod shuffle it dont let me

i need help please help me on itunes i try to change my name for the ipod shuffle and it dont let me it dont do anything also when i try to delete the music on it it dont show me if i want to delete or not the font is just gray and dont show any opitions also when i go on my iphone it lets me do all the stuff that it dont let me do i connect my iphone and it lets me delete music and change the name but the shuffle doesnt

What happens when you try to change the Shuffle's name from under the Devices section in the left hand pane of iTunes?
Is your iPod set up to manually manage its contents. For more information, see your iPod's User Guide.
http://support.apple.com/manuals/#ipodshuffle
B-rock

Started a similar string before. When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage. I know that they are registered. Is there a problem with Contacts?

Started a similar string before. When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage. I know that they are registered. Is there a problem with Contacts possibly. The previous help has been appreciated but the problem persists.

Hi,
Try iMessaging your own iPhone and see if your account is actually logged in.
It can appear "enabled" and On line but sometimes it is not.
Also try sending from your iPhone (number) to your Apple ID and see if it gets to the Mac.
If it does not use the Sign Out button.
Then shut down the Mac
On restart add back the Apple ID to the iMessages account settings.
I also just checked My wife's iPhone as she popped up red.
It turned out her iPhone did not have Messages On.
10:00 pm Tuesday; January 28, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

ICHAT shows an IM name that is the sender that is not the name on the account. How do I change the name of the sender? Make sense?

On my IChat accountn when I send a message to someone it shows a name, for example.
John Doe (IM):
Hello
John doe is not my name. Mine for the sake of discussion will be
Jim Nabors
Why is John Doe showing up on my sent ICHAT texts when its not associated with my account?

Hi,
Can I check I have Understood this correctly ?
You are saying if You send the IM the Buddy sees the name "John Doe" instead of "Jim Nabors" ?
If this is an AIM login name there can be several reasons for this.
1) AIM allow Display names to be used.
Most people will remember setting this and tend to add Capitals and Spaces to their "Name"
If you Visit AIM Settings you can check your Display Name (if there is one)
Mine look like this when I have signed in
I have it set to display iChat Guru
2) iChat takes the naes in the Buddy List you have and combines that with the Address Book entries (an entry has to list a person's Screen Name)
That causes the iChat Buddy List to display their "Real Name" (or whatever you added as their "First Name, Last Name")
It could be that your Buddy calls you "John Doe" in their Address Book.
The only way you can be sure is to have them take a Screen Shot of the chat and send it to you.
(best to use some phrase or pic so you are certain is going to be you only)
Example Bonjour Chat with me at both ends.
I have the View Menu > Messages set to to display Names and Buddy Pics so the left hand "Buddy" shows my name as in the Address Book on the other computer (even though I use the same pic)
This leads on to what iChat shows you at your end.
In the header it can show your your "Handle" (Screen Name) or your Real Name as it appears in the address Book at the My Card entry.
The Address Book tends to have the name in the My Card of the person that created the Mac User Account.
This can mean that if your are logged on to the Mac as someone else that this will display at your End.
Only your Screen Name is sent to the other end.
10:00 PM Thursday; January 26, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

The name of the security certificate is invalid or does not match the name of the site error?

I am looking for some help folks. We are in a Outlook 2007/Exchange2010/Windows2008R2 environment.
When users open Outlook off the network, and occasionally on the network, they get the error
The name of the security certificate is invalid or does not match the name of the site error
The CAS hostname is HRECAS.XXX.ORG. The URL that is listed on the SSL certificate (issued by VeriSign) is WEB.XXX.ORG. WEB.XXX.ORG is what users use to get to OWA and such.
When I use testexchangeconnectivity.com, under certificate name validation I see an error that reads:
Host name autodiscover.xxx.org doesn't match any name found on the server certificate CN=web.xxx.org.
Does this mean somehow we have to add autodiscover.xxx.org on the certificate?
I tried to add AutoDiscoverExternalUri using
http://support.microsoft.com/?kbid=940726 &
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/2d0c0f5f-e4ec-4f33-a37d-b94fd7a2319f on the CAS server.
Set-ClientAccessServer -identity HRECAS -AutodiscoverServiceExternalUri
https://autodiscover.xxx.org/Autodiscover/Autodiscover.xml
I get an error that says
"a positional parameter cannot be found that accepts argument '-AutoDiscoverExternalUri'.
Can someone point to me what I am doing wrong with the command and whether I should be concerning myself with adding that line? By the way the
InternalUrl information is already configured on the system. Also should I edit the certificate to add autodiscover.xxx.org?
Thank in advance for your support.
TD
TD

Hi Tapera,
Thanks for the question.
SRV record is a good idea. You can set the SRV to
https://web.abc.com/autodiscover/autodiscover.xml but you must make sure the
url can be resolved from External clients.
In addition, there is still a issue. It is hard coded that Outlook will find the autodiscover by the orders below:
1. Access autodiscover via SCP in AD.
https://web.abc.com/autodiscover/autodiscover.xml
2. If SCP access fails, it will try:
https://abc.com/autodiscover/autodiscover.xml
3. Then
https://autodiscover.abc.com/autodiscover/autodiscover.xml
4. Local XML file
5. SRV record
As you can see, Outlook will try SRV record at last. Therefore, it will still try to access
https://autodiscover.abc.com/autodiscover/autodiscover.xml each time you run Outlook. Then the certificate warning will still persists.
I have a workaround solution. You can do a local policy to disable the autodiscover to access the
https://autodiscover.abc.ocom/autodiscover/autodiscover.xml by:
1.
On the Outlook client machine, open regedit and add the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Autodiscover
         "ExcludeHttpsAutodiscoverDomain"
         "ExcludeHttpsRootDomain"
2.
Then set the value to “1” on the above two keys.
Thanks,
Simon

When i compose a new message and am typing in the name of the person to send it to it says iMessage after their name but when i click it says "Bonjour (offline) " my bonjour account isn't even enabled!? and it all used to work fine

When i compose a new message and am typing in the name of the person to send it to it says iMessage after their name but when i click it says "Bonjour (offline) " my bonjour account isn't even enabled!? and it all used to work fine please help!

Hi,
I invoked New Mesage
I typed a Name in Manually (rather than using the blue + icon)
I clicked on the "to" name and got this
Uploaded with Skitch!
I don't get a Bonjour Option here.
I do get a Jabber ID showing up for them but for soem reason it does not list my "From" account.
I would say that I have seen multiple "To"s and the same for the "From" choices and I think I have seen the Bonjour one listed.
However the "To" And "From"s don't seem to match and it appears you can iMessage Jabber names/ID or Jabber AIM names (which you can't in either case)
10:06 PM Thursday; March 8, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Email workflow showing domain and alias and not the name in the email

I created an email workflow for a specific user field value to receive an email on a trigger event.
However, the email received shows the DOMAIN/Alias and not the "Name" in the email content.
How to correct this error? Not sure where is the issue is.
Sample:
Hello [%Current Item: Reviewer%] is the greeting line.
If Reviewer is say Domain A/v-abcd and Name is Abcd.
The email reads
"Hello Domain A/v-abcd" and not "Hello Abcd"

Hi,
Just select "Display Name" instead of "Login Name" in the "Return field as" field of Lookup dialog.
It should help.
Regards Michael (http://sp2013-blog.com)
Please, don't forget to upvote and mark as an answer if appropriate

N8 not showing the name of the contact calling

Hi All,
I have seen a strange issue with N8. I have never experienced this with any other Nokia phones that I have been using. Not sure if others have noticed it. Here is what I have experienced:
At times, I have seen that when I receive a call from the person who is already added in my contact list, the phone is just displaying the number and not the name of the person. When I check the Log, it also displays the number and not the name of the person.
Just so that someone might have a question, I have imported my contact list from my previous handset (Nokia N70) where it worked absolutely fine.
If someone has experienced the same kind of issue, could you please explain me and help me resolve it. It is quite inconvenient to identify the caller without the name and decide whether to accept or reject during work hours and have at times missed some important calls due to that.
Thanks,
manishk1403

Just so you know, guys, you're not the only ones with this issue. It suddenly popped up a week or so ago when I ran the PR 1.2 update OTA. And as to the comment about duplicate contacts, my phone used to show the name that was alphabetically first amongst the duplicates sharing the same number.
Nokia, you've made one the best devices thus far in the N8, and I feel like I can say that because I've used Nokia devices since the 3310, and am a diehard fan in every respect. But the issues I've had on the N8 are totally unbelievable. I still use a 7610 and I find it more reliable than the N8. Also, it's surprising to see how caustic your support team replies are to genuine problems your users are having with their phones, which are UNDOUBTEDLY a result of improperly thought out firmware upgrades and plain lack of user-friendliness. Nokia seems very happy to place the blame on the user, that is, provided they reply in the first place. And as to the solution above, the one that the operator at Nokia support recommended, is just plain idiotic. What exactly is the point of OTA upgrades if one has to perform it by cable anyways? And resetting the phone? Do I have to do it everytime I install something on my phone? Is that the solution to every problem on this great device? I mean, come ON Nokia. I gave up an iPhone 4 for this. Please try not to make me, and millions of others who have done the same thing regret our decision. We're not asking you to perform rocket science on clay tableta or a feat of some improbable technological wonder. We're asking you for things that are ALREADY there for AGES on other phones, and a little bit of consideration that I feel we've all earned. I honestly didnt mean for this to turn into a rant, but this is truly the first time ever that I've had such a troublesome device from Nokia, and witnessed such scathing indifference to user troubles, despite being squarely at fault with respect to buggy and incomplete firmware.

Is there any way to have the page title NOT be the name of the HTML file

You might want a page title to be say "Digital Media Academy." You don't however really want the html file to be called "Digital%20Media%20Academy.html" Windows web browsers often have problem opening pages with spaces in the file name. On the other hand you don't really want the page title to be "DigitalMediaAcademy" because that looks kind of dumb. Any way around this.

The page is already not included in the nav bar, but
where do you set the page name to be different from
the file name? How can I set the name of the page,
such as the name of this page is "Apple - Support -
Discussions - Post Message:Reply," to be different
from the file name?
I think I probably misunderstood your question. You want the html "title," which appears at the top of a browser, to be independent of the name of the html file, right? I don't think that is possible in this version without manually editing the html after publishing. iWeb uses the page name given in the inspector for both the navigation bar link and the file name, replacing spaces by %20 in the latter because web servers don't allow spaces in file names.

HT2470 I need to change the home folder name. I just bought this mac today and my cousin put his name in because he had to back up his phone while we were still at the store so he could get a new phone and now my brand new imac says his name in the home f

I need to change the home folder name. I just bought this mac today and my cousin put his name in because he had to back up his phone while we were still at the store so he could get a new phone and now my brand new imac says his name in the home folder. This is very frustrating. I would not have let him put his name in there if I didn't think you could change it. Someone please help!

Delete his user account and create your own, using your name.

Exchange 2010 - The name on the security certificate is invalid or does not match the name of the site

Scenario - Two Domains in different forests in production
Domain ABC.com - Contains Exchange Server 2010 + Windows 2008 R2 AD Domain controllers
Domain XYZ.com - Windows 2008 R2 Domain controllers + Contains all users + Desktop compuer accounts.
User logs in to the domain XYZ.com from a desktop and he configures outlook using the user ID in domain ABC.com.
When he opens Outlook it is getting connected and he gets an error message pop -up saying 'The name on the security
certificate is invalid or does not match the name of the site'
I am using an external certificate from Thawte for autodiscover.ABC.com & webmail.ABC.com
I read about one solution provided in MS KB article - http://support.microsoft.com/kb/2772058
But in my scenarion there are two domain involved. Pls guide how to clear this.

Hi,
How about logon [email protected] on ABC domain via OWA?
If OWA works well, it seems and issue on the Autodiscover side.
Please run "Test E-mail AutoConfiguration" on Outlook to check whether this issue caused by Certificate Mismatch.
1.
Firstly make sure how many host name in your certificate the certificate. Run “Get-ExchangeCertificate | select certificatedomain”.
2.
Secondly, check the web services URLs which Outlook are trying to connect to. Run “Test Email AutoConfiguration”.
3.
In this scenario, you need to check the host name for the following services:
Autodiscover, EWS, OAB, ECP, UM
4.
If any of the urls above does not match the one in the certificate, refer to the following article to change it via EMS:
http://support.microsoft.com/kb/940726
More details to see following FAQ on "Checklist for Exchange Certificate issues":
http://social.technet.microsoft.com/Forums/en-US/fa78799b-5c55-4c71-973b-0e186612ff6f/checklist-for-exchange-certificate-issues?forum=exchangesvrgeneral
Thanks
Mavis Huang
TechNet Community Support

MY IPOD DO NOT SAY THE NAME OF THE MUSIC ANYMORE. IT SAYS "ALL SONGS".

Similar Messages

Maybe you are looking for