My ipod does not show any wifi signal

No reception of Wifi on ipod; wifi fine but no icon showing at top of screen. All the software is configured correctly and this was fixed by switching off/on before but not this time.

Does the iPod connect to other networks?
Any error messages?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.

Similar Messages

  • Ipod does not show any of the files I have put in it

    Hi,
    I have been using my 5G iPod 60 GB for sometime now. I had lot of songs, photos and videos in it. All of a sudden it does not show me any of these files. My music, photo and video folders are empty. It shows my iPod capacity as 1.3 MB when I go to view the settings>about. I have tried reseting the iPod few times by pressing the center and menu commands together a few times. Any help is appreciated. Thanks

    Exporting is the wrong procedure.
    In Lightroom, right-click on the photo and select Edit In

  • My iphone 4s does not show any wifi networks

    I have tried many suggested solutions(below) and nothing is working. Any other suggestions please?
    - restart phone
    - restart router then phone
    - reset network settings
    - reset all settings
    - enable mac filter on router and adding the MAC address of the phone
    - Airplane mode on / off
    - changed channels on the router

    if other devices can connect to the routers.  but not your phone.  i would take it to the apple store to have them trouble shoot the wireless in the phone.  if you reset everything and still can't get a connection then its the phone thats the issue.  just as a test.  have you restored phone back to factory ?  of course backing it up first ?  if not i would try that.  go to settings on phone.  general.  reset to factory after doing a backup.  then try after that.  but don't restore your files yet.  test before you add your restore. 

  • HT1695 iphone does not show any wifi

    I go to my wifi settings and there are no wifi networks shown.  I type my wifi and password in, but it is like it is not there.  My router is working fine.  Whatever the problem it is with the iphone.  All other devices work amazingly.

    Try restarting your WiFi router by removing power for 30 seconds.
    Use Settings > General > Reset > Reset network settings
    Connect.

  • My ipod touch will not detect any wifi signals but other devices are connected to the wifi; please help!??

    My ipod touch will not detect any wifi signals but others devices such as my laptops; do connect without a problem. I restored my ipod and updated it and still no wifi signals are being detected.

    Go to your ipod touch wireless settings chose your network and right beside there is button looks like ">" click on that check the dhcp what IP are you getting? do you get any ip? if you do your ipod touch should work with wireless no problem. Also, you may have to enter wep key again.  After that it shou,d save your device

  • My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

    my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
    Diagnostics test
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    ECS G31T-M7
    iTunes 10.5.2.11
    QuickTime 7.6.9
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0012ABAC07F3CCB0
    Current user is an administrator.
    The current local date and time is 2011-12-31 14:06:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel(R) G33/G31 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
    Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.5
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Sat Dec 31 13:46:09 2011
    Lease Expires:       Tue Jan 03 13:46:09 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was unsuccessful.
    The network connection timed out.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-12-31 14:00:02.
    **** Device Connectivity Tests ****
    iPodService 10.5.2.11 is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    rawkiss’s iPhone, iPhone 3G running firmware version 4.0
    Serial Number:       86931UEAY7H
    **** Device Sync Tests ****
    Sync tests completed successfully.

    I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
    Here is a link that will take you directly to the Tech Note:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
    When using this fix the Tech Note indicates:
    "Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
    however it did retain the captions (at least it did for me).

  • Itunes freezes when connecting and ipod does not show up

    When I connect my nano 3rd gen in windows vista using itunes 9 my ipod does not show up and itunes freezes. the ipod remains with the connected screen and I cannot close out of itunes. Any help would be wonderful... Thanks!!

    I have (finally)solved the problem with my iTunes freezing! Here's what I did:
    1.I backed up my entire music library to an external hard drive.
    2.Then I completely uninstalled iTunes 9 from my computer.
    3.After a re-boot I then completely deleted my entire music library. (this can be a little scary so I double checked my music library back up on the external drive)
    4.I Googled iTunes 8 and found it at
    http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/
    5. I downloaded it but before I installed it I copied my music library back to my computer. I did not copy everything that was in my original iTunes music folder however, I only copied the music,album art work, applications,games,Tv shoes, and podcasts folders. I placed those folders in a new folder called iTunes on my computer. I did not include any of the iTunes database files eg: .itl / .xml / or .itdb files as these were created in iTunes 9.
    6. Now I opened iTunes 8.2 and added all of my music and other media content.
    7. Next I attached my iPod nano to my computer. Then Windows automaticly open a window asking me if I wanted to scan for problems or continue without scanning. I had windows scan for problems and once that was done my iPod nano began to sync. Oh what joy!
    I think, and this is only a guess based on what I've read here on Apple's discussion pages and my own experience, that there is a problem/conflict or bug with iTunes 9, Windows Vista and the 3rd -4th generation iPod. I will NOT be upgrading to iTunes 9 until Apple has addressed this issue. It seems to me that there are a lot of people having similar issues.

  • Ipod does not shows up on macbook

    hi i have recently brought a macbook and wanted to connect my ipod to my itunes, unfortunely my ipod does not shows up on my MAC itunes, is that because previously i used to connect my ipod to my WINDOWS itunes? PLS HELP MI THANKS!!!!

    iTunes on the Mac should be able to see a Windows formatted iPod with no problem.
    When you connect the iPod, do you get any messages of any kind?
    Does the iPod still work on the Windows machine?
    Doc

  • My ipod does not show in itunes

    Hello - Please help me if you can, my ipod does not show in itunes nor can i update my ipod. Please don't suggest that I update my itunes because i had aloooooooot of trouble with the new itunes 6.0 or greater (something is wrong with that update)and i just lucked into installing the older version which was given with my ipod. My music is there but I can't get my songs - is there any way I can get my songs to go to my ipod with this problem? Thanks for any assistance.

    Welcome to Apple Discussions!
    Windows Does Not Recognize iPod
    Also, a new version of iTunes was recently released. You may want to try that, but it is up to you.
    btabz

  • Ipod does not show files

    Please help! - my ipod (80gb classic/black) all of a sudden does not show any of my music at all (nor photos etc). I have restored it on iTunes, yet the files are still absent, and when I plug it back in iTunes does not recognise it - and regularly becomes unresponsive and freezes. I erased the ipod on disk utility, but since doing this I cannot erase it again - it will not unmount. The iPod also makes a clicking noise which I presume is its hard drive.
    Is this a problem with my Mac - ie iTunes files, or does it sound like a physical problem with the ipod itself?
    Thanks for your help, Tim Stoner

    Stonertim,
    Clicking noise is usually a sign of a failing hard drive, I would take it (Your iPod) to your local Apple store and let them take a look at it.
    Weston

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

  • HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

    How do i update 10.5.8 if my macbook does not show any software updates?

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • IOS 7 Calendar Day View does not show any all-day events ?

    Hi,
    I realize that iOS 7 Calendar Day View  does not show any all-day events.
    Is this a bug ?
    Any help given is much appreciated.
    Thanks and Regards.

    Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

  • My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

    My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

    Try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Last, try restoring on another computer.

  • Search Item drop-down does not show any data for Advanced Search.

    Hi,
    I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
    1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
    2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
    3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
    Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
    I am using OAF version 12.1.1.
    Thanks, Suresh

    Hi,
    I faced the same situation but i still waiting for the solution.. this is my problem's thread..
    Addition of LOV Search Filter using Personalization
    But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
    I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
    Thanks
    Renu

Maybe you are looking for

  • BT Customer Helpdesk only knows how to lie.

    Hi, I am here to report something, not sure if this is the right place. Long story short (going to try my best). On the 4th of this month I transferred my BT Infinity to the new property, engineer did poor work and told me that I would get good signa

  • Idoc transfer via jco

    hi,    i am sending idoc to sap system.    how can i know weather it is went or not ,i want to check it is there or not....   plz provide step by step.... with regards, tony

  • How to find the Acoount Group used while creating the customer master data.

    Hi, I am in xd03 mode displaying the customer master data. I want to know the ACCOUNT GROUP which was used while create this customer. How can i find it? Can any one tell me the process to find the account group? Thanks in advance.

  • Macbook Pro Retina 13" Battery Life - Need Advice

    Hi. I bought my first ever Macbook Pro Retina 13" a few days ago. I am mainly going to be using it for college work, listening to music and watching youtube videos in my spare time. And browsing the net of course. I was wondering what is the BEST way

  • V$DATABASE_BLOCK_CORRUPTION vs V$BACKUP_CORRUPTION

    What is difference between V$DATABASE_BLOCK_CORRUPTION AND V$BACKUP_CORRUPTION? both are same?