My Ipod does'nt get recognized by windows or Itunes.

When i plug my Ipod in with my USB-device, it makes the sound that it normally does when the Ipod is plugged in, but it is not recognized on windows nor Itunes. I have tried to Uninstall and re-install.
Please help!!

What does "USB device" mean?
through a hub is not a supported configuration.
through another USB devcie, like USB hard drive or something would also be treated as a USB hub.
And to troubleshoot, rule out and simplify, and connect direct to USB ports coming from the motherboard, depends on just what style type computer you have, notebook, tower, other.
I tend to find a good starting point are the product support page
http://www.apple.com/support/ipodtouch/syncing/
http://www.apple.com/support/ipodtouch/

Similar Messages

  • Ipod touch doesnt get recognized by windows or itunes?

    okay so just recently i would plug in my ipod touch and the little noise windows makes to say that something has been plugged in rings except itunes wont recognize it or windows will make it seem like its not even there like its plugged in but a ghost HELP PLEASE!

    This may not be your problem but I though it might be worth mentioning. I was having the same problem until I realized I had bought a second usb cable since a family member was always borrowing mine. I spent several days going crazy because my ipod touch was unable to sync with my PC. I finally swapped the new cable for the old and things worked fine.
    I discovered that the new cable was only for recharging the battery and not syncing!!! It was only upon looking at the cable packaging that it said in fine print - for charging only!!!
    I have no idea why they don't state that more clearly on the outer packaging.
    Good luck!

  • Ipod Touch is'nt recognized in Windows or Itunes

    Hello, my Problem is that my Ipod Touch isn't Recognized in Windows or Itunes on my PC, on a Friends PC it works fine, so u guess the Ipod is ok..
    1. I tried everything Restarted Apple Mobile Device Service and reinstalled
    2. Reinstalled Itunes
    3. Reinstalled Windows
    4. Other USB Ports
    5. Recovery Mode (In Recovery Mode the Ipod is recognized but can't Restore because bevore it Restores completly it gets automaticly disconnected and does'nt connect again)
    I Restored my Ipod at the PC from my Friend, but it still doesn't work here.
    The USB Ports also can't be the Problem, since all other USB Devices work fine. And the Ipod Touch worked fine as well till a few Days ago.
    Every Help is appreciated.

    Hi,
    What's the make and model of the PC? Is it a desktop or laptop PC?
    Make sure the iPod touch is directly connected to a high-speed USB2 port on the PC. The tips in this article: http://support.apple.com/kb/TS1286 will help rule out USB connection issues.
    What security software is running on the PC?
    If you haven't already, try to reconfigure, update, or uninstall the security software, as suggested here: http://support.apple.com/kb/TS3125.
    Also, this article: http://support.apple.com/kb/HT1852 provides general tips that will resolve most issues that prevent the iPhone from being recognized by iTunes.
    -Jason

  • Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes.

    Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?

    iPhone not appearing in iTunes

  • IPod is no longer recognized by Windows or iTunes

    I tried to up date my iPod Nano with the 2006-06-28 updater. Instead of going through the normal process of opening iTunes and telling it to disconnect my iPod, I went to the icon on the tool bar that says "Safely Remove Hardware" and told it to disconnect my iPod. However, when I turned my iPod on, it had erased all my memory, and to make things worse, neither the updater, iTunes, or even Windows recognized that my iPod was plugged in. What is going wrong, and how do i fix it?

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Still no joy, see these.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.

  • Ipod charges but isnt recognized by windows or itunes

    Ok so I see this is a huge problem..so here we go again:
    My shuffle worked before and all of a sudden Windows or Itunes doesnt show that my Ipod Shuffle is connected. When I plug it into my USB port, the status light is amber and thats all that shows up. I have downloaded the newest versions of the updaters and itunes and still..not working. And when I try to use the updater, first it said NO ipod connected and now it says Ipod service error...I'm not quite sure what to do now, so any help I can get is appreciated!

    Have you looked here:
    http://docs.info.apple.com/article.html?artnum=93716

  • Ipod does not show up in Windows or Itunes! tried everything!

    Here is the problem:
    This is a new problem. Ipod worked fine on this computer until recently.
    Ipod 5th gen does not show up in My Computer or Itunes.
    It seems that it happend after I installed the latest update to Itunes.
    What is happening:
    When Ipod is plugged into my USB (the same one I always used before) it never shows up in my computer or itunes and always says "Do Not Disconnect" never stops!
    What have I tried:
    I plugged it into my friends laptop! It worked fine. Window found it.
    I then used updater on it
    I did the 5 r's over and over again. Nothing
    I have reinstalled Itunes and tried that a few times
    I tried different USB ports, nothing
    I tried putting other items in my USBs and they work fine
    IPOD just refusses to be seen on this computer again.
    Any ideas? Thanks. This comp has my library and it is the one I use daily.

    Thanks! But I actually figured it out! Right after I said something about the driver, I went into device mangager. Sure enough even though it did not show up as a drive letter the device manager said is was installed and working.
    So I deleted the device out of device manager. Restarted and plugged it in. Although I go some weird error. It found the IPOD and now Itunes sees it.
    I believe that killing the process would have done the same thing as you stated.
    Thanks to all for taking the time to answer these issues. It beats the apple store or tech support.

  • IPod Touch 1g not recognized in Windows and iTunes

    Hi all
    i have a old iPod Touch 1g at home. the problem is that the device is death. I can hold Home and Pwr button for a long time but nothing happens.
    Even when i connect it to a Pc running XP, Windows 7 or a Mac the screen stays black and no error from windows that drivers are being installed or the "USB-sound".
    I looked already in the FAQ and on Google but all the solutions don't work for me.
    In short words, i have a death iPod and i have no clue how to fix that or even if its possible to fix it.
    Can someone give se some alternative solutions?
    Regards
    Max

    maxiklotz wrote:
    would there be the possibility to send the ipod to apple that they can reinstall the software?
    i would take it to the nearest Apple store, especially if it would still be under warranty.
    how much would that cost?
    if it were still under warranty, they might replace it on the spot at the Apple store.
    if you connect your "new" iPod to iTunes, you will be given the option to "restore" your latest backup from the old to the new device.

  • TS1363 My iPod Touch is not recognized in windows or iTunes, how do I fix this problem?

    I have updated my iTunes and checked my security settings, what can I do to make my iPod recognized by both my computer and iTunes?

    Hello BLTNO,
    Start with this Apple support document related to your issue.  Make sure to work through each and every single troubleshooting step as necessary.
    http://support.apple.com/kb/TS1369
    B-rock

  • IPod Nano does not get recognized as it should

    Hi
    I have got a problem that just popped up. The iPod itself works fine but I can not sync any longer.
    When I plug in my iPod Nano it does not open iTunes anymore and when I open iTunes it does not appear. It get recognized in Windows Explorer as a new drive but without the iPod name and when clicking on the drive it says that the disk is not formatted and ask if I would like to format now.
    I tried to changed drive from G to other as from one support page but without result
    I have tried the 5 R´s but I am unable to restore the unit as the iPod updater freezes when I open it and it tries to look for the iPod.
    My PC is with Windows 2000 and my iPod worked fine earlier.
    I have tried to connect the iPod to other PC´s but with the same result -- the iPod says "do not disconnect" and nothing happens more than that the battery get charged.
    I have tried to end the iPodservice.exe from the task manager but it fails saying "unable to terminate process, access is denied" This happend in all three PC´s
    The unit shows up when clicking on the Safe Hardware removal icon in USB as "Apple iPod USB device" but when trying to stop the device it says that the unit can not be stopped now...
    In my iPod I have checked and it is Format Windows
    What to do now???

    Ok I reply to myself if anyone intresetd in what happen in my case
    I have now been able to do the restore my iPod Nano using the hints in one of the questions below. So now the iPod is recognized by Windows Explorer but now by iTunes. At least some progress.
    What puzzles me ist that it seems that half teh world have teh same problem and Apples suggestion how to solve this does not work so where is Apple support?
    No more fromme, I will read and try every thing I can until I just take a hammer and make the life of the iPod shorter than expected. There are many MP3 players on teh market that works...

  • Ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.

    ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.  help?

    Hi stitchinstar!
    I have an article for you that will help  you troubleshoot this issue with your iPod and iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • 5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

    Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • Ipod not recognized by Windows or ITunes (Ipod updater)

    My Ipod Nano was being charged when my 2 year old hit the reset button on the computer. After the computer rebooted I found out what happened. Now my Ipod just flashes the Apple logo . . . it does nothing else. Neither windows nor Itunes recognizes that it is connected to the computer. I have tried the 5Rs, but it will not reset (holding down the menu and center button appears to turn the Ipod off, but when you release the buttons the logo starts flashing again). Is there anything that can be done before I go through the hassle of sending it into Apple for repair?
    Ipod Nano   Windows XP Pro  

    That is EXACTLY what has happened to mine. I have been on web tech support for 2 days; nothing works. I called Best Buy and talked to tech guy: explained the problem to him and he said it was a hard drive gone bad. He also said that Apple changed their policies and does not still allow them to do any more than just reset the iPod; otherwise it has to be sent back to Apple.
    If you get an answer that really helps, I'd love to hear it!!
    [email protected]

  • Ipod touch not recognized by windows or itunes by one laptop fine on any other laptop

    I have a laptop that runs windows 7, my ipod classic and nano all get recognized by computer and itunes.  When I plug in my ipod touch, it isn't recognized by either, but when I plug it into another computer or laptop running windows 7, it is recognized.  I have run all the recommended steps, reinstalled itunes several times, why won't this work?

    Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    Did you remove and reinstall ALL Apple software using:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Songs disappeared - iPod not recognized in Windows or iTunes

    Hi, I have had a 5th generation iPod for 8 months now and have a big problem:
    After I charged it in a wall plug, all the songs disappeared from my iPod. It has happened to me once in the past but the songs then reappeared... don't know how that happened. Now, songs are all gone and Windows and iTunes won't recognize my iPod. I have reset it and since then, the screen keeps changing from the main menu to the Apple logo and then back to the main menu. My iPod will then be recognized in Windows for a few seconds, while the main menu is displayed on the screen, and then disappear. I have put it into disk mode and only then will Windows recognize it, but not iTunes. I have then restarted the iPod Service via Computer Management but once I reset my iPod to remove it from the disk mode, it continued changing from the main menu to the Apple logo. Since the problem seems to be with my iPod and not with iTunes, I have not tried to delete iTunes and reinstall it.
    Thanks for your help!!

    this is the error message I get when I run an ipod diagnostics:
    iPodService 7.0.1.8 is currently not running.
    iTunesHelper is currently not running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskMaxtor6L160M0_________________________BANC1G10
    Could not get bus type for CD, 50. Problem with installation of drive in Windows.
    , Bus Address [0,0]
    IDE\DiskMaxtor6V160E0_________________________VA111630
    Could not get bus type for CD, 50. Problem with installation of drive in Windows.
    , Bus Address [1,0]
    USBSTOR\DiskApple__iPod___________1.62
    Universal Serial Bus Controllers:
    Intel(R) 82801GB USB Universal Host Controller - 27C8, PCI bus 0, device 29, function 0. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27C9, PCI bus 0, device 29, function 1. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CA, PCI bus 0, device 29, function 2. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CB, PCI bus 0, device 29, function 3. Device is working properly.
    Intel(R) 82801GB USB2 Enhanced Host Controller - 27CC, PCI bus 0, device 29, function 7. Device is working properly.
    IEEE 1394 Host Controllers:
    Texas Instruments OHCI Compliant IEEE 1394 Host Controller, PCI bus 5, device 5, function 0. Device is working properly.
    OHCI Compliant IEEE 1394 Host Controller, PCI bus 5, device 0, function 2. Device is working properly.
    OHCI Compliant IEEE 1394 Host Controller, PCI bus 5, device 2, function 0. Device is working properly.

Maybe you are looking for

  • MSI Big Bang XPower II - Corsair H60 Water cooling issue

    So I am using a Corsair H60 water cooling on my MSI Big Bang XPower II mainboard.  I have followed the correct instructions on installation but every time I turn the computer on once it its 31 it shuts down.  Everything seems to be working correctly

  • How do I copy and paste only the text from a cell?

    Hi - Every time I want to move text to a different cell, copy and paste copies all styles as well.  How do I just copy and paste the text while leaving the style of the receiving cell in tact? Thanks. Chris

  • ACR 8.3 and D600 .nef Files

    I'm using a Nikon D600, shooting with a flaat picture profile to create both RAW and JPG files. I'm using: Adobe Bridge CC ver: 6.0.1. 6 x64 / Lightroom 5.3 / ACR 8.3 (I'm a CC user and I have all the current software available.) I have alot of exper

  • Java command not working - path problem ?

    Im not really new to Java, but rather new to Linux :=) Ive got NetBeans setup and working great on Redhat 7.2 and I can run Java apps from within the IDE...but not from a command line. I get "bash: java: command not found" This tells me something is

  • Help with calculation code!! for Times tables program

    I am creating a times tables program that lets the user select the Times tables, number of lines required and the type of table (multipy, addition etc). So if user selects 12 times tables and 4 lines it should look like this on the screen: 12 x 1 = 1