My ipod doesn't appear on itunes when plugged in my computer?

My Ipod touch 4g doesn't appear on itunes when plugged in my computer. It doesn't charge on my computer and I can't use itunes with my computer and my ipod. What would be solutions for this problem?

See:
iOS: Device not recognized in iTunes for Windows
If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.

Similar Messages

  • [SOLVED] iPod doesn't appear in /dev/ when plugged in

    I've been trying to get my iPod touch to work, but I can't even find it inside /dev/. I'm supposed to be able to mount it manually if I see it as /dev/sdx# but I only see my hard drive's devices.
    I know it is recognized by the system,
    when I try lsusb, I get this line (among others):
    Bus 001 Device 010: ID 05ac:1299 Apple, Inc.
    also, with usb-devices I get the following:
    T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  3
    P:  Vendor=05ac ProdID=1299 Rev=00.01
    S:  Manufacturer=Apple Inc.
    S:  Product=iPod
    S:  SerialNumber=2b032b9c4f73f37786c4fb2cf3a0e15bc75a0331
    C:  #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none)
    I don't know if  the <<Driver=(none)>> part is normal here, I can mount/automount whatever other usb devices, like usb flash, or external hdd's, but not the iPod.
    Any help would be very much appreciated
    Last edited by KBM (2010-07-10 06:29:06)

    hey guys. I know this thread was "solved", but it didn't solve my problems.
    I also got my ipod touch mounted using ifuse and was able to use gtkpod to transfer my files. However, since all of my files ended in .mp3, and the ipod didn't strip the extensions off, I decided to clear them from the ipod and start again.
    In the middle of a sync I forgot about it, unplugged the ipod, and now ifuse gives me the message:
    No device found, is it connected?
    If it is make sure that your user has permissions to access the raw usb device.
    If you're still having issues try unplugging the device and reconnecting it.
    whenever I try to mount it.
    I did the view-the-log thing, and when I plug it in I get this:
    Oct 11 08:00:10 localhost usbmuxd[22304]: [2] Could not open device 1-4: -3
    So it seems to be a problem with usbmuxd. Any ideas guys?
    One more thing, I think I may have accidentally deleted some files from the ipod ("HashTable" comes to mind...), but I did a software update. Would that rebuild the filesystem?
    Thanks.

  • I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

    I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
    Thank you

    So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

  • IPod doesn't appear in iTunes and Windows

    I have a next problem with connecting nano with Windows:
    iPod doesn't appear in iTunes: iTunes 7 diagnostic write that host-controller of bus IEEE 1394 was not found.
    Sometimes Windows see the demountable disk, but can't open it. Occasionally, when i charge nano, iTunes gives out the message, that iPod is damaged.
    After connecting iPod to the computer, it shows the "Do not disconnect" screen, which not disappear after nano disconnecting. And I need reset iPod everytime after charging.
    Does any help me?

    I read this article.
    I can't restore iPod because iPod Updater can't recognize it, when one connect to the computer.
    How to solve the problem: as i wrote, iTunes diagnostic informs that can't find the controller IEEE 1394 (WiFi), but I HAVEN'T WiFi card on computer, I use USB 2.0.

  • My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer.  This happened after I agreed to a failed software update.

    My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either.  This happened after I agreed to a software update which failed.  How can I get it going again?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201401 screen completely black, appears on itunes when plugged, powered down but no logo

    screen completely black, appears on itunes when plugged, powered down but no logo

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    Are you still running iOS 7 bet?. If so go to the private developer section for help. We cannot help you here with beta software.

  • Ipod doesn't appear in itunes or on desktop - trouble transfering music

    When connecting Ipod, it doesn't appear in itunes or on desktop (Windows). Attempted to fix.
    Reinstalled itunes and ipod, also upgraded itunes - no success in fixing.
    Restored ipod (through computer)- no success in fixing - and of course, lost all songs in ipod.
    Now, ipod sometimes appears in itunes, sometimes doesn't.
    I've had a little success transfering songs (albeit, inconsistently) back to ipod from itunes, but sporadically.
    Itunes is working fine when playing songs on computer;
    Ipod working fine when playing songs on ipod. It's difficult transferring songs back to ipod. I checked cable and port with other equipment. Cable and port appear to be working. When clicking on Safely Remove Hardware, computer identifies ipod as "drive 0." I need help on how to get my ipod to appear in itunes again and fix the transfering problem?

    HI there, Welcome to Apple discussions
    Try this page and come back if you still have issues. Book mark it as well, as you may need it again in the future.
    http://www.apple.com/support/ipod/index.html
    http://docs.info.apple.com/article.html?artnum=93976

  • IPod doesn't appear in iTunes

    My iPod Touch doesn't appear in ITunes, so of course I can't sync it.
    Now, my iPod nano syncs just fine with the same cable and USB connection, so the problem must be with the iPod touch. 
    When I plug it in, I get that little "chirp" and the battery indicator appears on the screen, but that's it.
    Any ideas what's going on?   What should I do?

    Try here. The iPod touch (and iPhone and iPad) use different drivers than the Nano.
    iOS: Device not recognized in iTunes for Windows

  • IPod doesn't appear in iTunes or Device Manager.

    My iPod has worked fine, until I plugged it into my computer, and attempted to upgrade to version 1.1.4, now my iPod touch doesn't appear when I plug it into my computer. It doesn't appear in iTunes, or in the device manager, it does however start charging. Also, it has completely wiped the enitire memory (Music, photos, videos etc).
    I have tryed the "5 R's", restart, reset etc etc. None of it works. I have tryed re-installing everything (iTune, quicktime, etc) and that doesn't work.
    I've tryed hard and soft resets, and I've tryed restarting the Apple Mobile Device thingy.
    PLEASE PLEASE PLEASE PLEASE HELP ME
    Pretty please

    I figured it out
    You have to put you iPod in recovery mode.
    You do this by...
    Turning off your iPod properly (hold the top button in for 6 seconds, slide the slider)
    Then you hold the home button, an while your still holding it down, connect to your computer.
    Keep holding, keep holding when the apple comes up, keep holdin until you see the 'Like to iTunes' picture.
    Then iTunes should say it detects an iPod in recovery mode, an it should happen from there

  • IPod doesn't appear in iTunes or on desktop

    My iPod does not appear in iTunes or on the desktop even though it is charging though the firewire. Can anyone help? I tried the steps recommended in the support section of Apple's website, but nothing changed.

    My iPod knows it's plugged into my Mac. It charges, shows up in the Finder, and very very occasionally even pops up in iTunes. Here's the thing though, it's about a 1 in 50 chance of iTunes recognising the iPod is plugged in, even when the Finder does.
    I've gone through the endlessly entertaining process of restoring the iPod software (it's currently at 2.3, and was when the problem first showed up), unplugging and plugging it in countless times, and finally reinstalling 10.4. Things became flakey, albeit workable, from the day I first installed 10.4.
    After reinstalling 10.4, the problems persisted. So when I saw iTunes 4.8 had been released this morning, I hoped a quiet fix had been included. First time it ran, my iPod showed up, but the second time, same old problem. It's present in the Finder, Disk Utility knows it's there, it works with iSync (or did when I last synced anyway), but iTunes usually completely ignores the device.
    When it does show its face in iTunes, I haven't done anything special as far as I can tell (well, besides restarted my Mac, reset the iPod, and reconnected it countless times).
    I'm lost for options. Next step is calling Apple.

  • IPod Touch will not power up and will not respond to itunes when plugged into a computer

    iPod Touch will not power up and will not respond to itunes when plugged to computer, have tried holding both buttons down for 10 secs like support suggest but nothing has happen. Any suggestions?

    Try the other actions here:
    iOS: Not responding or does not turn on

  • Why doesn't iPod icon pop up in iTunes when plugged in???

    ^^^^
    How can I have the iPod icon appear on the source menu when I plug it in? I've had the iPod for two months and everytime I plug the iPod into the computer, the icon automatically appears in the source icon and the songs start to update. But I tried today, and no icon at all. I haven't done anything different to the computer either. How can I update my iPod?
    Thanks,
    JayDee

    Look for these programs in Task Manager > Processes tab
    click the box to show processes from all users
    Click on "Image Name" to sort alphabetically
    ItunesHelper.exe - should be running under your account
    iPodService.exe - should be running under SYSTEM account
    iTunes.exe - should be running under your account
    Are they all there?

  • My Iphone doesn't appear in Itunes when?

    My Iphone doesn't appear or connect to Itunes?
    I restarted my Iphone as the support page recommended, but my Iphone just appeared for a few seconds before it disappeared.
    I have updated to the latest version of Itunes and IOS and Itunes is running on a Macbook Air, so the problem is not related to windows.
    I can’t find any further help at the support-page, can anybody help me?

    Did you try recovery mode?
    iOS: Unable to update or restore

  • My iphone does not appear in itunes when connected to my computer

    When I plug in my iphone to my computer it is not appearing in itunes.
    I can see in my computer that the phone is connected and photos can be browsed through MyComputer so the cable is making the connection.
    any ideas?

    Hey dalustig59,
    Thanks for the question. I understand that you are experiencing issues with your iPhone being recognized in iTunes. The following resources may provide a solution:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device detected but not identified properly on iTunes for Windows
    http://support.apple.com/kb/TS2818
    Thanks,
    Matt M.

Maybe you are looking for

  • Error while executing procedure

    Hi, I am executing a procedure, which will write a query result into a spreadsheet and it will store it into the local PC. i am trying to run this procedure using TEST username. Now i created a utl_file directory like below: create directory MYDIR5 A

  • BPM Studio 11g: New Process doesn't work

    Hi, Just downloaded JDeveloper 11.1.1.3 and extension "Oracle BPM Studio 11g". I created a BPM application, a BPM project and in this project a try to make a new Process, but after new > BPM Tier > Process, nothing happens. Am I missing something? Th

  • Can we run 2 version of same full client on the same desktop

    Hi Friends, We are in the process of upgrading our Hyperion Planning environment from 9.3.0 to 9.3.1, Some our our users utilize the full client for Reporting Studio and Analytic Administrative Services Console on their desktop. While the upgrade is

  • Running AppleScript from Mail rules

    Hi. I'm pretty new to this, so sure it's a basic question.... I've created An AppleScript that calls an Automator application.  This runs fine if I open the script in the editor and click run. I've now created a mail rule which should run this script

  • Apache 2.2 and ColdFusion MX

    I have ColdFusion MX 7 and Apache 2.2.4 installed on my machine, I have ran the latest JRUN connector which created all the necessary entries in apache etc. When I try to serve a coldfusion template, I get a 'You have chosen to open' alert i.e.doesn'