My ipod doesn't Sync or Charge, but does recognize USB cable

Hi There
I have a 4th gen 60gb ipod that has worked fine for about 2 years. As of yesterday it doesn't charge when plugged into a charger or USB port (2 different ports with 2 different cables) but the wierd thing is that it does sem to acknowledge the cable being connected/removed as the backlight comes on and it doesn't drain the battery whilst the cable is connected. Also it seems to charge a bit if I boot into the diagnostics menu.
Resetting has made no difference and it still responds normally otherwise.
Is it fried? What settings in the diagnostics menu should I be looking at? Is there anything else I can try? All help appreciated!
Thanks

Hey Foreman22,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: 'Trust This Computer' alert
http://support.apple.com/kb/HT5868
Note: If you select Trust, the computer will be trusted indefinitely. If you select Don't Trust, you will be asked if you want to trust that computer each time you connect your device to that computer.
Thanks,
Mario

Similar Messages

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Ipod doesn't recognise wall charger but will charge through pc

    I'm completely puzzled - its stopped picking up charge all of a sudden if I plug it into the mains although my OH ipod classic charges fine with the mains adaptor. If I plug it into the pc it is charging fine via that. I tried resetting it to see if that made any difference but it doesn't.
    If I switch it off so it has a black screen and then plug the mains adaptor in the screen display doesn't light up but I can see images as though it is powering up.
    Any suggestions - its out of warranty in Nov this year.

    I have the same problem here. Charges via usb but will not charge via wall or car charger.

  • How do I connect my 2nd generation Ipod to a Firewire 800 port? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered...

    How do I connect my 2nd generation Ipod to a Firewire 800 port on a new laptop? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered and connected simultaneously. Pls help.

    Try here:
    iOS: Not responding or does not turn on
    If not successful then time for an appointment at the Genius Bar of an Apple store.

  • My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

    My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • IPod doesn't sync with iTunes anymore!! HELP!!

    I am in complete despair - my iPod doesn't sync with iTunes anymore. It all started a couple of days ago, after installing the latest updates of both, iTunes and iPod. After that, I noticed that the iPod wasn't synching the changes and new additions I had made in iTunes.
    I tried everything so far with no success. I did reset the iPOd, reinstalled the iPod updater, than did a RESTORE and now my iPod is completely empty, but refuses to download my music from iTunes.
    When connected, it shows up, start "updating iPod" and several seconds later shows "update complete". In the iPod window I can all the songs (in grey) from my library, but they are not being transferred to my iPod!!!
    Please, help!!

    I think I know the problem and it's solution. The iPod "thinks" it's linked to a different library and therefore does not synchronize. No idea what happens in the background there, but here is what I did:
    First, I went back to the previous update on the iPod (not sure if that's necessary at all, but I just wanted to go to where I started from.
    The UNinstalled iTunes (to be safe I backed up my tunes) and reinstalled it. Then pasted backed up tunes into new iTunes music folder and overwrote newly created iTunes library files.
    Then I connected the iPod, which now told me that I had an old version and needed to update, which I did.
    Then a window popped up and told me that my iPod was connected to a different library and if I want to connect to this one, overwriting everything on the iPod, which I said yes to (it didn't matter anyway, since it was now empty after the RESTORE I had done).
    iPod then downloaded all the songs from my library again and we are as happy together as we've been before
    I think what happened was that after installing the latest update, that window with the "different library connection" had popped up as well and I must have clicked NO because of the "overwrite" comment which scared me. Unfortunately, even with "reset warnings" it then never popped up again and until I reinstalled iTunes.
    Hope this helps!

  • My ipod will charge but does not show in itunes or windows

    I tried to use my ipod as a disk to transfer my itunes library from my desktop to my notebook (both Dell), now my ipod charges, but does not show up in itunes or on either of my computers. I have used the advice of going to control panel and unchecking the box under power management but that didn't work, CAN SOMEONE PLEASE PLLLEEEEAAAASSSSSSSEEEEEEE HELP ME?
    I have windows xp on one and vista on the other, if that helps.

    This worked for me, don't know if it will for you. Have ITunes open. While IPod is connected to computer press(at the same time) the menu and center buttons until your screen goes black and shows the apple icon then immediately press the forward button. Your IPod should show up. It won't hurt to try it, even if it doesn't work. Hope this is of some help to you.

  • After last iTunes update 3 days ago, my iPod doesn`t sync with my iTunes. What should I do?  :(

    After last iTunes update 3 days ago, my iPod doesn`t sync with my iTunes. What should I do? 
    Regards,
    Gisele

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • TS2771 my ipod used to only charge when it was completely off but now i have to wrap the usb charger around my ipod and it shows the charging but it still doesnt charge

    My ipod touch 4th gen used to only charge when it was completely off, but now a week or 2 later i am having to wrap my charger around my ipod to make it start charging but soon enough that still isnt charging.
    Any help?
    Thank you

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If nothiing above helped, restore the iPhone to factory settings >  Use iTunes to restore your iOS device to factory settings

  • My iPod doesn't sync when I connect it.

    My iPod doesn't sync when I connect it. It states that it is, but within a few seconds it tells me that it is safe to eject, without adding recent purchases from iTunes.

    Start here:
    Troubleshooting iTunes installation on Mac OS X

  • My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it.

    My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it?

    I am getting the same error message. Have you figured it out?

  • My Ipod Classic 160 GB will charge but is not recognized on my macbook or in itunes. Just began suddenly

    I purchased my Ipod Classic 160 GB about a year ago new and never had any issues until lately. I recently updated my itunes to the newest version and my Ipod seemed fine and didn't have any trouble. About a week later my Ipod was no longer recognized by Itunes or my Mac book. The catch is, that my Ipod is still able to charge but never shows any signs of connection besides the charging screen. I have no clue where to begin.
    Any help would be awesome! Thanks

    Have you updated your iPod and iTunes sofware?
    most cases, iTunes can play these high quality songs, which is meant for newer mobile devices like  iPhones, iPod Touch, nano and iPad, which the older iPod cant play, but only playable with iPod classic sofware version 2.0.4
    most likely it is an incompatible song format, read this Apple support article.
    http://support.apple.com/kb/HT1334?viewlocale=en_USet
    If  your iPod software is version 1.1.2, then you have to use lower quality format.
    Can you select the problematic song, and Advance -> create iPod version

  • Ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

    ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • I just bought a philips fidelio docking speaker and when I plug my iPod touch 4th gen it charges but dosent play music through the speaker.

    I just bought a philips fidelio docking speaker and when I plug my iPod touch 4th gen it charges but dosent play music through the speaker.

    Does Phillips say it will work with a 4G iPod with 6.1.5?
    Have you went to their support site?
    Which dock did you get?
    This one
    http://www.usa.philips.com/c-p/DS8500_37/-/specifications
    says only compatilbe with the 1G, 2G and 5G iPod tpouchs (as well as some other iOS devices)

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Maybe you are looking for

  • Slow wifi connection - going crazy trying to figure it out. Sadface.

    Howdy, I read through the forum and tried to find a solution to this problem but everyone seems to be experiencing differences in what is wrong with their problem and I have yet to find a solution to mind. Problem: Recently I've noticed my wifi conne

  • Multiple PR's generating for same material after MRP

    Hi Guru's, As per my business scenario, i am creating project with WBSE, Activities and BOM. By using the reference points, i am transferring the BOM to Project, then executing MRP run. But after MRP run i found that multiple PR's generated for the s

  • Error on $LOG_HOME/ora/10.1.3/Apache/error_log

    Hi, i have an installation of EBS R12 and, even if i don't have problems, it still continue to log the below errors inside the directory $LOG_HOME/ora/10.1.3/Apache/ ; for example in the error_log.1276646400 i have: [Wed Jun 16 11:02:38 2010] [error]

  • Mcp proximity top side

    When run the AST show this error under Sensors in red: MCP Proximity Top Side: 71 Anyone knows what this means?

  • I cant install lexmark 7100 series printer to my computer

    I have an older printer, a Lexmark X7170 that I have tried to install but my computer wont let me install it. do I need a newer printer??? This question was solved. View Solution.