My ipod freeze every time i plug in the computer i need help plz

my ipod freeze every time i plug on my computer i dont know how to reset and delete all songs plz help u.u

Does your iTunes see your nano?
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Appears in Windows but not in iTunes
If so, then follow through this:
How to reset iPod
Restoring iPod to factory settings
If not, do one or more of the following
Restart your computer
Uninstall & Reinstall iTunes [Windows XP] [Windows Vista & 7]
Reset iPod (will NOT delete everything)
Go to My Computer (Windows XP) or Computer (Windows Vista & 7) and see if it shows
Restore iPod (WILL delete everything)
Make sure iTunes and iOS firmware is up to date.
Hope all this helps.
Message was edited by: keeferaf

Similar Messages

  • I need help!!!! i cant reinstall itunes without the itunes64 folder and i already deleted every aspect of itunes from the computer i need help

    ineed help!!!! i cant reinstall itunes with out the itunes 64 folder and i already deleteted every aspect of itunes from the computer!!!!!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • TB freezes every time I use it....need help ( Windows 7 )

    what can I do ? very frustrating ! I use both windows 7 and Mozilla as browsers, but TB freezes on both...every time I check my email. I have uninstalled and reinstalled, but makes no difference

    What anti virus program?

  • IPod freezes every time I plug it into my latop

    Nearly all the time when I plug in my iPod (3rd Generation) it freezes, I put it on hold and back and press the center button, I hold it down for at least 15-20 seconds, and it still doesn't unfreeze. After like an hour and I try to restart it it sometimes works, It has froze one time for a whole night before, I don't know what's wrong, and its really irritating me now.
    Oh and my center button doesn't work right, I have to click it to the bottom right of the button for it to work, Do you know whats wrong with it? I've had it for about a year now.
    Thanks

    It would be interesting if it could "talk" to iTunes on a different host computer..if it couldn't it sounds like it would be some type of hardware problem, and would involve a warranty replacement of the new device.....wish I had a better answer...

  • My Safari is reloading over and over and every time that I start the computer I need to put off and on the Wi-Fi to work properly.

    When I start the computer I try to open the safari but it start to reaload over and over, so I turn off the Wi-Fi and after turn on, then start Safari again, and it starts to work again. I believe that is not a problem of RAM because I put 16GB of RAM for not having ptoblems like this. So what is the problem? what should I do to solve them?

    Welcome to the iOS world of nonthinking, wherein the OS decides everything for you, whether or not that's what you want. Salient details described in http://www.apple.com/macosx/whats-new/features.html#resume
    See these for steps to resolve:
    http://hints.macworld.com/article.php?story=20110918051930924
    http://osxdaily.com/2011/08/01/turn-off-resume-per-app-in-mac-os-x-lion/
    http://restoremenot.info/

  • My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    Hello kidmango,
    I am going to have to agree with planb77. Look into other drivers in your computer causing the issue, not just the nano's drivers.
    It is possible that security software is the culprit. Use this:
    iTunes: Troubleshooting security software issues
    You may have to restore your computer to a previous point. From before the issue started. Contact computer manufacture or Windows for steps, or do a search with a search engine.
    I would test the ipod on a known good computer to see if its the ipod is the issue. My gut says no. You can set a reservation at an Apple Retail Store. Apple.com/retail .You can also test a known good ipod on your computer.
    Hope this helps.
    ~Julian

  • Why is my iPod synching every time I plug it in?

    Why is my iPod synching every time I plug it in? I have everything set to MANUAL.

    Why is my iPod synching every time I plug it in? I have everything set to MANUAL.

  • I was wondering if there is a way to shut off the install mode on my G3 every time I plug in the USB to my Mac. I have an android manager software Mobile Go that this seems to be preventing it from connecting

    I was wondering if there is a way to shut off the install mode on my G3 every time I plug in the USB to my Mac. I have an android manager software Mobile Go that this seems to be preventing it from connecting

        as62467 We appreciate your G3 question! Let's see how we can help. What you are able to adjust is the USB connection mode by going to the home screen and selecting'recent apps' (in the touch keys bar), settings,storage, the menu (the 3 tiny dots) and tap usb pc connection. If you do not want the software to try and install choose either the internet connection or camera option. Let us know if this helps.
    SheritaH_VZW
    Follow us on Twitter

  • My ipod nano is fully charged (I believe) but every time i disconnect from the computer it turns itself off

    My ipod nano is fully charged (I believe) but every time i disconnect from the computer the screen just shuts down and nothing happens. Occasionally it might work but the battery is already as low as it can go and turns it self off. What should i do?

    So the iPod only powers on when connected to an external power source such as a USB port on your PC or when connected to a wall charger?  If so, that is a very good indication that your iPod's battery is shot and in need of replacement.
    Apple can swap it out for a flat fee or you can send it to a third party repair service for a bit less.
    B-rock

  • Installing device driver every time I turn on the computer

    Every time I turn on my computer or plug in my iPhone 3G, I get the little icon and popup for "Installing Device Driver" and after a couple of minutes it says it installed successfully and then starts installing itself all over again. It's irritating as heck. I'm on Windows Vista and iTunes version 9.1.1.12. I updated Windows and updated iTunes and neither helped. This just started happening within the last week. My computer only has one USB drive and it's the one I've always used. Please help!

    It sounds as if you have more than one thing going on here. You say that when you turn on your computer you are getting an icon about installing device driver. Then you say it happens "or plug in my iPhone 3G". These should be two different issues.
    Let's isolate the first one. When you turn the computer on, you are getting a device driver popup. This occurs every time you turn on the computer? Are you running it in an administrator mode? What kind of external devices do you have connected to the computer? What USB devices do you have connected, i.e. printer, external drives (not flash drives)?
    After that, we can tackle the iPhone issue.

  • The new firefox twitter app is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? I am working on an iMac - if that is causing the problem ...? Thanks.

    The new firefox twitter app (mini tab on left of page) is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? It won't appear on the page until I do. I am working on an iMac - if that is causing the problem ...? Thanks.

    Eustace, thank you so much for writing back.  I will try what you suggested!!
    thx for your reply - apparently when I went to the Apple store a long time ago, they restore maybe photos and itunes etc from my external hard drive (passport).  I guess at that time they reinstalled an earlier operating system than my macbook came with and that somehow corrupted FileVault.  apparently there was no sparse bundle (whatever that is) for my old admin account and they said that ever since the install of the older OS that it was actually NEVER backing up anything in my admin account.
    Then, I bought Time Capsule and starting backing up to that instead.  I started having problems with it being slow etc and then StartUp Disk full errors and didn't know what to do, so I "Restored" from Time Capsule and that's when I lost everything in my Admin account and was locked out when I tried to log in - it said File Vault error ..."
    anyway - that's THAT sad story.  I was told to create a new admin account and I've basically been trying to start over - even though I have a partial save of my computer in Crash Plan and I DO see a sparse bundle listed in there, but I just don't know enough about computers to know if it's something I can get back or if I am just totally doomed. 
    I'm afraid to reinstall anything because if there is even a remote shot that the other files are still floating around in my computer, I feel like that chance will be shot forever.  I need to hire McGee from NCIS, I just KNOW he could get those files back for me!!!

  • Satellite A500 - mouse pad freezes every time I go onto the internet

    Hi all,
    I have a Toshiba Satellite A500 and every time I go onto the internet my mouse pad freezes. The only option I have is to restart the computer again. This is becoming very frustrating as I do not know what to do?
    If someone can help this would be greatly appreciated. Thank you.
    Cheers
    Karen.

    Hello Karen
    To be honest I have never heard about something like this and believe you are the first one with this strange issue.
    I would like to know since when you have noticed this? I cannot imagine this issue persists from the first day.
    Do you have original preinstalled operating system?
    I can imagine the first step can be BIOS update. Is latest BIOS installed on your Satellite Notebook?

  • HT5457 After updating my iPod touch 4th generation to iOS 6, my iPod crashes every time I'm in the App Store even if I'm just browsing. How can this be fixed? Can I go back to iOS 5?

    After updating my iPod touch to iOS 6 it crashes every time I'm in the App Store even if I'm just browsing. Is there a fix for this? Can I go back to iOS 5?

    If you really wanted to, you can find out how to restore your device to a previous version here:
    https://discussions.apple.com/message/19639988#19639988
    ~Lt. Leviathan

  • Itunes will not recognize my ipod nano when it is plugged into the computed

    itunes will not recognize my ipod nano when it is plugged into the computed

    Check this post: https://discussions.apple.com/message/6985613#6985613

  • My iTunes freezes every time I plug my iPod in to update it.

    Everytime that I plug in my iPod to update it, iTunes freezes and nothing is transferred onto my iPod. But as soon as I unplug my iPod from the computer, iTunes immediately unfreezes and goes back to normal. What's going on?

    Did you get your ipod working? I am having the same issue. Keeps telling me I need to format but it does not work.
    Thanks

Maybe you are looking for

  • REPORT WITH MATERIAL NUMBER

    Hello Everyone, I have successfully brought in data from multiple datasources into a multi provider. All 4 datasources have a common field and that is MATERIAL. The data in the multi provider is obviously not cleansed. What I would like to do is merg

  • Moving to the USA - With a UK iMac

    Hey everyone I have searched for the answer to this with no such luck in finding an answer. Im moving to Orlando, Florida in August and am taking my iMac with me (Obviously). I am going to need some sort of converter for the power and although apple

  • Can't get CF working with IIS6 on W2k3 sp2

    Hi I really have no idea how many times I have had no problems getting CF and IIS playing nice with each other: dozens and dozens of times. Prior to today, the last time I had a problem was back in the latter days of CFMX6.0. Today I am faced with a

  • Deploying standard changes to SSIS packages

    A couple glitches were discovered in our SSIS template.  Approximately 100 packages were built from the template.  Is there a mechanism to update all packages with the changes?  Or do I have to open each one and manually change?

  • No SID found for value 'ZMCR/YMIN' of characteristic 0SPRTTYPE

    Good day All, We have done all the configurations for ITSM reporting and interactive reporting is working correctly but the ITSM BW reporting is giving the below error. Kindly assist with the solution. Regards Tebogo