My ipod has a black screen will not turn on or reset
my ipod has a black screen will not turn on. Will not reset per ipod instructions. no battery picture when plugged in
Try restoring...
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
If you have problems restoring...
iPhone and iPod touch: Unable to update or restore
Similar Messages
-
My ipod has a black screen. It will not turn on. The battery is charged. Any help will be appreciated.
Try restoring...
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
If you have problems restoring...
iPhone and iPod touch: Unable to update or restore -
my iphone 5s has been showing a blue screen and shuttiing down. yesterday night it did just that and now will not reboot or even restore through itunes.
what should i do?Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
Phone was not updated on time so it automatically shuts off and you get a plain black screen until it is recovered and updated. Well when i did the update and recovery I received an error. I went through the steps to fix the error, I had to restart my computer and now the phone isnt recognized on my computer or in itunes. The screen is still completely black so pushing the home button and plugging in to computer still does nothing. Device manager shows nothing in usb port, and apple mobile device software is installed and running. Any help?
Hello agardner37701,
I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode. I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My ipod touch is frozen and will not turn off or reset
Hey, i sorta broke my brothers ipod that he adores so much for some reason. it is basically frozen and the screen looks like a monster truck ran over it. it also locked up. i already broke the news to him. he said by him a new one or get apple to fix it. Now I don't know for sure but my friends say repairs cost more than the ipod it's self and i cant find a 64 gb ipod any wear on the internet for a good price. so can any on help me fix it or should I just pay $290 for a 3rd gen ipod?
OKAY I MANAGED to get buy a screen replacement so i think i have that fix but it still wont budge
-
my ipod has just black screen and the home button is not working. what will i do? help please!
Try:
- iOS: Not responding or does not turn on
When it says place the iPodin recovery mode use this prgram.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
my ipod has a black screen with a loading symbol (its moving) i cant turn it off or plug it into itunes its been like this for about 3.5 hours. i tried to do a system reset it after a glitched download. but while it was reseting it got stuck ot a black loading screen.
PLEASE HELP ME !!!!!!!!The article helped me a bit but it doesnt help me totally because the buttons dont work and i cannot connect to itunes (itunes does not sense my ipod when plugged in) so im thinking to just let the battery uncharge...
but when it went down i was fully charged
(im very unpatient) -
My ipod has a black screen with only the resisitive button on show. HELP
i dropped my ipod touch and the restart button doesnt work, so i got the resisitve touch and now my ipod has a black screen with only the resisitive button on show. HELP ME PLEASEE
PLEASE HELP OR IM GOING TO END UP THROWING IT AWAY
Message was edited by: Sadiiaa_Try:
- iOS: Not responding or does not turn on
Where it says place the iPod in recovery mode use this program.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iPhone 4 has just shut down. Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge. Any suggestions? I did download a ringtone app and went on to iTunes to sync!.
Try charging the iPhone via a wall socket for at least 30 minutes then try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
my ipod has a black screen and it wont turn on . this is the very first time this happend. it has a full battery
That symptom is covered here:
iPod touch: Hardware troubleshooting -
I have an ipad 2, 16GB 3G WiFi, worked perfectly, but now black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore from recovery mode, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?
I have tried multiple laptops with both units, re-installed Itunes, same error message on one of the units but ok on the other. Thinking I have a defective Ipad 2, any ideas on what to do is greatly appreciated.Tried Google? iPad error 1600
-
My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542
Is the iPad charged? Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.
-
Ever since I downloaded the new iOS 7 my screen will not turn up and down and it rotates on its own side to side.it will not face the way I want it to go. How do I fix it?
I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!
-
N8 screen will not turn on ...New phone just bough...
N8 screen will not turn on ...New phone just bought today and screen will not come on
Charge the device (check that the white LED next to the USB port lights up) for at least 20 minutes, keep pressing the on/off button (needs some force) till you feel a vibration.
Maybe you are looking for
-
Other products in suite work - Word, Powerpoint but excel wont open any files. The error condition is: Error Signature: Exception: EXC_BAD_ACCESS Date/Time: 2012-05-16 21:53:44 +1000 Application Name: Microsoft Excel Application Bundle ID: com.micros
-
API for Updating Attribute in CZ
Hi All, Could you please suggest me any Standard API to update the Attribute Value in cz_config_ext_attributes. Thank you, Aush
-
Use dynamic configurations inside an abap proxy
Hi, is it possible to set dynamic configurations inside an abap proxy? Inside an abap-mapping I can use "CALL METHOD DYNAMIC_CONFIGURATION->SET_RECORD". What's up with an abap proxy? Regards Wolfgang Hummel
-
We have a new Entrust SSL Certificate with issuer Entrust Certification Authority – L1K which Firefox does not recognize. Internet Explorer and Chrome are ok. On a different system we have an Entrust SSL Certificate with issuer Entrust Certification
-
Using MQ in client mode vs bindings
Is there any documentation available on how to configure WLS 8.1 sp3 to use MQ in client mode instead of bindings mode? Our infrastructure folks do not like having queue managers local to our Weblogic layer, and are insisting that we use cl