My ipod has a blank white screen and wont change no matter what i press or try.. what should i do?
my ipod has a blank white screen and wont change no matter what i press or try.. what do i need to do?
Try here:
iOS: Not responding or does not turn on
If you can't turn it off, let the battery fully drain. After charging for at least an hour try again.
If still problem that indicates a hardware problem an an appointment at the Genius Bar of an Apple store.
Similar Messages
-
My Ipod has a blank white screen and my home button doesn't work
My Ipods screen just went totally blank white and my home button doesn't work anymore any #Advise ??
i've seen the other videos i can do it but my home button doesn't work ??Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to download an upgrade that was recommended by APPLE, the upgrade stopped halfway through and the iPod Touch was turned off, now the iPod Touch has a BLANK WHITE SCREEN and is UNRESPONSIVE to the COMPUTER
I wonder if anyone can help
Thank you
BrizeyTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod has a blank white screen, help!!!
I just got a ipod video from my wife and it has a blank white screen and it does not show up on the scroll bar help me goin on a week long trip tomarow need help now.
Welcome to Apple Discussions!
Try the steps listed here...
Fifth Generation iPod has a blank backlit display and beeps 3 times
Here is a list of phone numbers if you still need them or would like them...
Apple Phone Numbers
btabz -
My sons ipod locked up and now has a solid white screen and wont respond to anything
My sons ipod was working fine then the screen locked up wouldn't allow any use tried to turn it off now it has a solid white screen and wont respond to anything. Any ideas what i can do
Let the battery drain.
-
TS1382 my kid's ipod has a blank white screen - how do I fix it?
my 7 year old put a passcode on his ipod and after entering the passcode wrong three times has been left with a blank white screen. How do I fi this?
Hello Tiger 42,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone if it is unresponsive.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
Take care,
Alex H. -
Can anyone help me please? My ipod has a white screen that i cant get rid off. I have tried pressing home and power button at same time. I have tried a restore from itunes and its still the same. I cant even turn it off. Please someone help me.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod 6th Generation has a blank white screen and is apparently corrupted
I have tried restoring, and just don't know what else to do, pleeaase help!
Also, what happened to cause this? Is it the iPod? Or computer? (Macbook Pro)Have you tried a reset or restore of the device in iTunes to see if that helps? To reset the device, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Otherwise, connect the iPod to your iTunes library and click the Restore button from under the iPod's Summary tab.
If the issue still persists, it's likely hardware related. A white screen could be the result of a loose LCD ribbon cable, or a damaged LCD screen. Either way you'll need to have the iPod serviced in order to gain fully functionality of it again.
B-rock -
My ipod has a blank white screen???? WHAAATT???
My ipod got damp one day(but still worked for a week or two after that). the screen is white now when i turn it on. i know where the buttons are so i can still listen to music but cannot see anything. what do i do??
Did you already try this?
Display shows white screen
Turn iPod touch off and turn it on again.
If the iPod will not turn off, try to reset it. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or battery symbol appears. If the battery symbol appears, continue to charge iPod touch until it is fully charged.
If that doesn't work, try restoring the iPod. See this article for assistance.
copied from iPod touch: Hardware troubleshooting -
Ipod has a blank white screen or "THE WHITE SCREEN OF DEATH"
It's been like this for a while now and I don't know what to do besides to take it into the apple store since I think I have tried everything to help get it back to normal. Any suggestions?
I received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
1. A window based PC
2. A Mac computer
3. An USB iPod cable
4. A Firewire iPod cable
5. An iPod AC charger
As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
How to reset iPod
http://docs.info.apple.com/article.html?artnum=61705
The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
I changed my mind, and put the iPod into disk mode
Putting iPod into disk mode
http://docs.info.apple.com/article.html?artnum=93651
Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore" -
Frozen video ipod on a blank white screen, tried alot of things please help
i have read through and tried all the suggestions that i saw. and nothing worked. my ipod has a blank white screen, and every time i reset it. it goes back to that white screen and makes a little noise on its own without headphones plugged in or anything. my mac does read that it is there. so i can't do any updates or anything help me please!
Welcome to Apple Discussions!
If your mac recognizes it, try restoring it...
Restore iPod
If it doesn't recognize it, try putting it into Disk Mode and then restore it...
Putting iPod into Disk Mode
btabz -
Why does my iPod Touch have a white screen and how do I get rid of it?
Why does my iPod Touch have a white screen and how do I get rid of it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod 4th gen went onto a blank white screen and turned off. what should i do?
My iPod 4th gen was dead so I charged it, the apple sign appeared and stayed on the screen for about 10 minutes then went onto a blank white screen and turned off. Now I can't charge it and it has already happened multiple times. what should I do? I also don't know which iOS operating system it is, does that matter?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.
Maybe you are looking for
-
Which inspection camera to use with my MacBook Air?
This question relates to inspection cameras also known as snake cameras, endoscopes, borescopes or fiberscopes. I want to buy an inspection camera which sits at the end of a cable perhaps 2-3m in length. I want to plug it straight into the USB port o
-
hi all, I am having a single alv report which should run in background & generate spool and after data convert the spool to pdf and send to mail. I want all these in a single alv report & it should be schedule in background. First I copied the
-
What am I supposed to do with a website half done in Iweb?
what am I supposed to do with a website half done in Iweb?
-
Handling Check box in BDC program
Hi Folks, I am developng a BDC for a transaction. The BDC has to pass four tabs in that transaction. Everything is working, but in the fourth tab, there is check box which need to be checked. But when the BDC program enters that tab..it thr
-
Any transaction is to be display exchange rate only?
Dear All: As subject. I try to use t-code 'S_BCE_6800174' OR 'OB08' OR 'OC41' OR 'OKUS'. These transaction all allowed to maintain. But I just want to display exchange rate only. I try to use role to control it's display(activities w