My ipod has a sideways "X" on the screen

My ipod has a sideways "X" on the screen (top right corner under the battery symbol). Does anyone know what this means?
Thanks in advance.

Sounds like you have shuffle turned on.
About the icons on the "Now Playing" screen.

Similar Messages

  • My ipod has a white shine on the screen when I try to use it

    My Ipod dropped and cracked a little bit about a month ago near the power button, not on the screen itself. Today when I started it up it had this white see thru haze whenever i start it up. Anyone know what could have caused this.

    Sure seems like the damage caused by the crack/dropping is progressing.However,
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If defective, Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price             

  • HT1414 my ipod has a solid color on the screen and will not respond at all what do I do?

    I was playing a game and the it just went to this screen that is kinda red and will not respond at all. I have tried to connect it to itunes to restore it but it never shows up. Is there another way to reset it? Right now I am just waiting for the battery to die.

    Try here:
    iOS: Not responding or does not turn on
    If not successful then do as you are doing, let the battery fully drain. After charging for at least an hour try again.

  • I tried to update my ipod but then it didnt work saying that an unknow error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it is on my screen, i dont know what to do?

    i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • My itunes need a update and i pluged in my ipod awhile doing the updat now my ipod won't turn on and the screen has a itunes ion on it what should i do

    my itunes need a update and i pluged in my ipod awhile doing the updat now my ipod won't turn on and the screen has a itunes ion on it what should i do? i really need the help

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I am trying to download an app that needs 501 MB and my iPod has over 1 GB, but the App Store says that I do not have enough memory left.

    I am trying to download an app that needs 501 MB and my iPod has over 1 GB, but the App Store says that I do not have enough memory left.

    Do you have a question?
    That sounds right.
    Most apps require more than double the size of the app available in order for installation.
    Make more room.

  • Ipod first gen. has horizontal lines going across the screen. What should i do?

    My iPod first generation has horizontal lines going accross the screen and sometimes the screen goes completely white. How do I fix that?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • My ipod nano 6th generation has a black spot on the screen

    My Ipod nano 6th generation has a black spot on the screen where it appears that it was pressed by a thumb.  Do I need to replace the screen or will it eventually correct itself after pressure is removed?

    Replacement silly

  • My New iPod nano 6g, just stop working the screen is freezd in the menu? Pleace HELP!!!

    My New iPod nano 6g, just stop working the screen is freezd in the menu? Pleace HELP!!!

    try resetting. Hold down volume down and sleep/wake button until you see apple logo.
    If that does not work, connect it to itunes, then restore.
    If none of that helps, you may need to contact apple. Has it gotten wet?
    i

  • I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

    I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

    This has worked for some others.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iphone 4 has an error message on the screen that reads "iphone disabled connect to itunes" what do i do

    My iPhone 4 has an error message on the screen that reads "iiPhone disabled connect to iTunes" I've tried connecting and can't get anywhere what do I do and what is the problem?

    Your phone is disabled for some reason. Maybe you entered the wrong Passcode too many times. In any case you need to do just as the phone is instructing you to do. Start the latest version of atones on your computer and connect your phone. iTunes should guide you through the process of getting your phone working again. Here's a link to an Apple support page on this:
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • I downloaded a app and when i started it up it froze and now has three lines going across the screen. Please Help

    My ipod touch isnt working. When I downloaded an app it froze up the screen and now it has three lines going across the screen please help me.

    Restore.

  • I forgot my password to ipod touch and its disabled and the screen is telling me to connect to itunes

    i forgot my password to my ipod touch and its disabled and the screen is telling me to connect to itunes but i cant do anything else.

    I am having the same issue. My son misplaced his iPod touch and we recently found it under his bed. He then came to me saying he could not remember what his password was and the screen said it was disabled and to connect it to iTunes.  iTunes says it needs to be unlocked.  I have tried turning it off and then holding down the home key and then plugging it in but it fails to go into restore mode.  I have attempted other variations as well (Holding down both the home and sleep buttons, etc but so far nada.  Just curious if anyone else has seen a problem getting it into restore mode and if they found a solution.

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

  • My friend sold me his iPod touch 3 gen 32gb but the problem is it's disabled an it ses to connect to iTunes an when I do connect it ses first I have to enter the password on the iPod but I can't cuz the screen stays the same what should I do

    My friend sold me his iPod touch 3 gen 32gb but the problem is it's disabled an it ses to connect to iTunes an when I do connect it ses first I have to enter the password on the iPod but I can't cuz the screen stays the same what should I do

    connect it in recovery mode, then set it up as a new device.

Maybe you are looking for

  • How to work around dataflow order in front panel simulation?

    I'm on the steep part of the Labview learning curve.  The attached vi is my attempt to simulate the user interface of the product I'm working on.  I'm posting because every workaround I dream up to deal with Labview's dataflow architecture results in

  • Import Workflow from Site-Template to Visual Studio 2012

      Hi, I would like to import a SiteCollection Template into VS 2012 to create a sandboxed solution WSP Deployment Package. The Package should contain some document libraries, some content types and a reusable workflow running in one of the imported c

  • Repair Permissions progress bar

    Okay Im not the only one. My wife and I Mac Mini's both display the same issue, however my MacBook Pro does not. All three computers have 10.6.7 installed. The Mini's generally show 23-25 minutes with no progress bar indication, then after about 3-4

  • Падение программы Adobe Dreamweaver CS6 при закрытии

    Сигнатура проблемы:   Имя события проблемы:                 BEX   Имя приложения:                             Dreamweaver.exe   Версия приложения:                        12.0.1.5842   Отметка времени приложения:     4ffc7da3   Имя модуля с ошибкой:  

  • Incident Management - changing doc-status after action SOCM_COPY_DOCUMENT

    Hello, in sppfcadm I've created a workflow handling new SAP-incidents. Everything works fine, but there's one problem: the user should have the possibility to create an urgent correction. With action SOCM_COPY_DOCUMENT the user can do this. After cho