My ipod has crashed and is not being recognised on the computerr

I turned the computer on with my ipod connected and went to Itunes,.  Then it asked if i wanted to update Ipod, it was a recodnised update to i continued. Then it started to sync,.  It fiished synching it, after which the ipod crashed and a picture of a apple and a bar underneath appeared.  It wont turn off and the computer now does not recognise the  ipod after it is connected back to the computer. 
Thanks

you want to put the device in recovery mode to restore
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.

Similar Messages

  • After updating ios my ipad is stuck in recovery mode and is not being recognised by the computer in windows or itunes.  Help!

    Help - I am stuck in Afghanistan on operations and my iPad mini has died.
    I tried to update the IOS as directed, there were a few error messages and I cancelled the process.
    The ipad now only shows the connect to itunes screen and is not being recognised by the computer in either windows or itunes.
    I have tried several resets and restarted the computer and reinstalled itunes.
    Is there anything else I can do.
    This is my only method of talking back to my family at the moment and is really quite important.
    JS

    Thanks, I will give it a go. Will it work on my computer after I do that?
    Jez

  • My ipod has frozen and isn't being recognised by itunes

    Recently, my iPod has been having troubles. It's been freezing in the middle of songs and when I try to change track, and, up till today, it's recovered. It's now been frozen for three hours. I restored the factory settings a couple of days ago, and it workeds, but only for a few hours.
    This morning, it froze in the middle of the song, and it's now not being recognised by iTunes. I've tried to do a hard reset, but it's not responding at all.
    It's an iPod Classic 30GB, and I think it's a 5th Generation. I got it second hand, and so I don't think I can take it and get it fixed and whatnot without paying money. Is it worth getting a new iPod? There is an Apple store near me, so I can take it in and see what they say, but as I said, it's second hand and it's past the warrenty.

    Charge the iPod for at least 2 hours
    Do the iPod Hard Reset -> Press Menu and Center Button simultaneously for at least 10 secs till the Apple logo comes ON.
    Then release the buttons
    Refer to this Apple Support article on the 5Rs.
    http://www.apple.com/support/ipod/five_rs/classic/
    If you plan to get a new iPod, get the iPod Touch and avoid at all cost the iPod Classic, the new generation of HD in the iPod Classic appear to be not very sturdy and reliable, in my Opinion, yours is still more sturdy, (6 years old), but the battery and hardisk would be  in the last lap. The full charge battery should last at least 20 hours of continuos music.
    You can do the iPod Disk diagnostic to see the HD health, as posted by tt2.
    https://discussions.apple.com/thread/3110831?tstart=240
    Don't worry about the Mac user, the DD process refer only to iPod Classic.
    Have a nice day!

  • Hello, my phone has crashed and will not be recognised on computer

    I connected my I phone 3GS to the computer to reset it and it said there was a software up date, so did this, half way through the system crashed. Now my oh e has the apple icon on with a bar underneath and it is no longer being recognised on I tunes. I have updated my I tunes.

    you want to put the device in recovery mode to restore
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.

  • My home imac has crashed and will not boot up.

    Hi
    My home imac has crashed and will not boot up and I'm not sure where to start.
    It wouldn't shut down properly so I turned off the power, and now it won't go beyond the apple logo and timeer when I try to restart it.
    It is an imac (4 years old), Intel, running OS X, not sure which version, but probably the latest.
    Thanks
    Carol

    I would first reset the SMC:
    Shut down and unplug the Mac.
    Keep the Mac unplugged for at least fifteen seconds.
    Plug the Mac back in and do not turn it back on for at least five seconds.
    Press the power button to turn the Mac back on.
    Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
    Let us know if these two procedures don't solve the problems.
    Hope this helps

  • My Ipad Mini with retina display has crashed and will not restart.

    My Ipad Mini with retina display has crashed and will not restart.Only the white screen with the apple logo will appear. This comes and goes randomly. I've tried resetting by holding the front and top buttons. I've also tried resetting using itunes. Neither had any effect, The Ipad was a christmas present and only worked for several hours, the apple store can not look at it for another week. Is this a common occurance? I thought apple products were expensive because they never had problems.

    Call Apple and explain as it is new. They will go over things to try and fix over the iPad over the phone. If they need to fix it they should send you a new one and you put the old one in thePrepaid return box they send you and send back the defective iPad for no cost. This is what they did with my first iPad 1st gen. I had. Unless they changed their policy you will get the box within a day or two and have your replacement for it the same day.
    I hope how they helped me is the same for you.  Good luck.

  • HT1727 How do I deauthorize a computer whne the hard drive has crashed and is not recoverable ?

    How do I deauthorize a computer when the hard drived has crashed and is not  recoverable ?

    You cannot directly deauthorize a computer that's not working or to which you no longer have access. You can authorize a total of up to five systems, so unless you've hit that limit it's probably not really important that you deauthorize your dead unit now. If you really want to deauthorize that system now, you can go into your iTunes Store account and there will be a "deauthorize all" button. You can then re-authorize the computers you're using.
    Note that you can only use the "deauthorize all" option once per year, unless something's changed very recently.
    Regards

  • My computer has crashed and I have had to restore the factory settings, without backing up my purchases is there anyway which I can recover purchased downloads?

    My computer has crashed and I have had to restore the factory settings, without backing up my purchases is there anyway which I can recover purchased downloads?

    check out Dave Sawyer's post in this thread.

  • I have just started with Logic X, having been a Logic 8 user for many years. I have some expensive plug-ins which are not being recognised by the news Logic. Where should I install them ?  YoursdisillusionedbyLogic

    I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ? 
    I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
    YoursdisillusionedbyLogic

    Hi
    LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
    Some plugs are not currently available as 64bit versions: you may want to try
    http://www.soundradix.com/products/32-lives
    CCT

  • My iPhoto has crashed and will not load up my picture and iTunes can not find my photos.  Why?

    My iPhoto has creashed and will not load up my pictures and iTunes can not find my picture either.  Why?

    Tell us more please - so it is hard to guess what might have happened.
    What is your iPhoto version and your MacOS X version?
    What happened directly, before you could no longer open your iPhoto library?
    Did you install or upgrade software?
    Did you import new photos to your iPhoto library?
    Are other programs also behaving buggie?
    Did you move your iPhoto library to a new harddisk?
    Did you run other programs, that might have changes the iPhoto library?
    How full is your harddrisk? Could it be, that you are running out of disk space?
    Anything at all, that could give us a clue ...
    -- Léonie

  • Iphoto has crashed and will not open.  Can I reinstall Iphoto without loosing my existing photos?

    Iphoto crashed and will not start.  How do I save my existing photos and videos and reinstall Iphoto?

    reinstalling will not cure this - you need to rebuild your library- Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    And the ONLY way to "save" your photos and videos - and every other file on your computer - is to always have a good current backup - sooner or later your disk will fail and with no backup you will lose everything
    LN

  • Ipod touch 6.1.3 not being recognised by iTunes 10.7

    Just got a secondhand iPod Touch. It is on 6.1.3 and I have iTunes 10.7 running on my iMac 10.6.8.  As far as I can see 6.1.3 is supported on iTunes 10.7.  I tried the Apple trouble-shooting page but to be honest it wasn't that helpful.
    If I set up Home Sharing then I can Home Share using the iPod Touch...which says that I do have connectivity at some level.  Just that it is not being recognised by iTunes and so I am unable to load my apps or transfer any music over.

    Many thanks lllaass
    I had gone through the first part without success but had decided not to go through the second stage. But following your recommendation I did just that and it works!

  • Since upgrading to Firefox 4.0 Norton IS site logins no longer work, even though they are running, they do not auto load. Is FF not being recognised after the update ?? ??

    Normally when i open FF the Norton IS login manager kicks in automatically and completes all the various site logins.
    '''However '''since the update to FF4, even though Norton IS 2011 is running the login manager is not working, it's as if FF4 is not being recognised as my browser any longer.
    There must be a fix for this; if not i'll be forced to revert to the previous version of FF
    New'ish system i3, Win 7, MS Office, Norton IS 2011, Firefox 4.0

    You are almost correct in your assumption Norton needs updating to FF4
    You can get Firefox 3.6.16 here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox

  • TS3694 I installed itunes onto my desktop but it would not recognise my device & eventually crashed the desktop. I tried my laptop & I got the 3014 error but the ipod has crashed and only shows a USB pic & itunes logo.

    Hi, I opened my new ipod 4th generation and had a play with it to initially find & install the amazon audible which I had been told was easy. Anyway I did it so I thought I would have a play with itunes. It regognized all my tracks and I managed to buy an album which I could not find in 'music'. I had to play each tarck, one at at time while they were recognised in history.
    While on my laptop I tried to install my tracks but nothing happaened. I was asked to update which I did & then my ipod locked. I've turned it off but when I switch it back on iget a picture of a USB cable pointing to itunes. Logically I thought thaht meant connect to itunes, itunes woud not recognise it and gave a 3014 error.
    I have a brand new ipod that is useless, i Feel useless like I am doing somthing wrong. Strange thing is I upgraded from a Philipps GoGear Connect which has bad reviews but at least I could listen to my music, play games and use audible.
    Has anyone got any ideas. It was purchased through Amazon/

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    Next try:
    3014
    Restoration of code 3014 will not work?: Apple Support Communities

  • IPod is not playing songs and is not being recognised by Windows AT ALL.

    Whenever I turn it on, the error flashes and I can't play songs. When I connect it to a computer, a flashing orange light comes on to say it's charging and do not disconnect.
    It is not appearing in iTunes, My Computer. Device manager shows a 'storage device' and that it is located on an Apple iPod.
    I run the iPod installer that came on the disc, it recognises the iPod is there and says it needs to be formatted. I press format but then it says there was an error communicating with the iPod. There is nothing I can do about this.
    Is this happening to anyone else and what can I do? If you need more information, just ask. Tech support was no real use and I am becoming very frustrated.
      Windows XP Pro  

    Whenever I turn it on, the error flashes and I can't
    play songs. When I connect it to a computer, a
    flashing orange light comes on to say it's charging
    and do not disconnect.
    It is not appearing in iTunes, My Computer. Device
    manager shows a 'storage device' and that it is
    located on an Apple iPod.
    I run the iPod installer that came on the disc, it
    recognises the iPod is there and says it needs to be
    formatted. I press format but then it says there was
    an error communicating with the iPod. There is
    nothing I can do about this.
    Is this happening to anyone else and what can I do?
    If you need more information, just ask. Tech support
    was no real use and I am becoming very
    frustrated.
    Windows XP Pro  
    My Ipod is doing the same. How do I fix this?

Maybe you are looking for

  • Is there a way to specify a number of vlookup results?

    I'm trying to make a kind of loose pivot-table-like date record lookup. Probably best if I show something analogous to what I'm wanting: Table1 Date BookRead 1/1/13 Les Miserables 1/2/13 The Hunchback of Notre Dame 1/3/13 Les Miserables 1/4/13 The Ph

  • Problem with Plugging in Compact Flash Card

    I am having a problem now when I plug my compact flash card in to download pictures.  When I plug the card in, the AutoPlay window pops up, as it always does.  However, I also get another window that pops up and says "Lightroom must quit because cata

  • Column name in link on sql report?

    Hey guys - Is there some way to put the column name of a report in a link? When you define a link on a column you have the ability to use a substition string for the VALUE of a particular column... but I want to somehow pass the string value of the c

  • I am not able to see the sent emails in the sent items folder. I am using Apple mail. Does anyone have any solutions?

    I can't see the latest emails I sent in the sent items in Apple mail. Also, I am not able to see my old emails in the inbos folder. Can someone please help me out with this?

  • Drop Down in ALV  ABAP and NOT in OO - ABAP

    Hello Everyone.... I m workin on an ALV which is in simple ABAP and not in OO-ABAP. There is some selection criteria on the first screen , as soon as the user fulfills the requirement an ALV GRID is displayed in which the last column is editable.   B