My iPod has disable after repeated attempts to unlock, My iPod has disable after repeated attempts to unlock
How can I unlock a disabled iPod?
Place the iPod in recovery mode andrestore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Similar Messages
-
My daughter's ipod touch has been disabled after too many wrong password attempts.
The ipod was never synced to the computer so can't connect to itunes.
How else can we enable the ipod touch again?Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. In your case, choose any computer with iTunes software. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
My iPod touch is disabled after too many attempts and I want to enable it without getting it clear so can you please help me out in this....
A data recovery company MAY be able to do it for a price. The Disabled is a very good security feature.
JWhy not just restore from the last backup you have?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
TS2446 Ipod touch displays "Your Apple ID has been disabled" when attempting to update Apps.
How do I work through "Your Apple ID has been disabled" on an Ipod Touch?
My child's Ipod touch displays "Your Apple ID has been disabled" when attempting to update game Apps. I have reset the password, and reset the Ipod to factory settings; did not resolve. This began by entering wrong Apple ID password multiple times. Thank you.Contact iTunes Support or browse the More Like This section on the right.
http://www.apple.com/support/itunes/contact.html -
My ipod was stuck in the connect to itunes sign, I have no idea what that's called. anyway, I connected it to itunes and tried to restore it. After several failed attempts, it seemed to be working, and showed an apple logo with a hollow white bar underneath it. From my undestanding, it was supposed to fill as it was restored, but Itunes came up with an error saying it failed to connect, so now it is frozen like that, and won't turn off or shut down when you hold the home and lock button for ten seconds It won't connect to itunes now. I dont know what to do. Please, any help would be good.
It's a second generation Itouch. and i think it has had the most recent update, im not sure.The white bar means it is doing the update. I hope you didn't unplug your iPod while it was updating.
Hold down the power and home buttons at the same time for at least 10 seconds until the Apple logo appears on the screen. After that you can let go. You may have to restore your iPod depending on the extent of the problem. -
I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?
If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.
-
Is there any way to break into an ipod after it has been disabled
i need help is there any way to break into an ipod touch after it has been disabled
Maybe the CIA could get data from an disabled iPod.
It is easy for anybody to erase the iPod and regain use of the iPod for their own use. Just place in recovery mode and retore. -
My daughter has put a passcode on her dads iphone 4s and cant remember it and after multiple attempts it is now in "connect to itunes. My husband does not want to lose the photos on it. Is there a way to get photos off before restoring
If that phone has been synced in iTunes, you can restore from the backup after having restored the phone.
There is also a little mac app that can read the iPhone backups that are in iTunes,called ibackupviewer.
Then when there is no backup of the iPhone: read the following aricle:
http://www.video-converter-mac.org/recover-notes-from-iphone/ -
My iPod Touch has been disabled because I had forgotten the password. Now I remember the password but can't get the iPod unlocked. I am hooked up to iTunes but can't get it unlock still? What am I doing wwrong????/
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode. -
I did download "itunes" to my computer afterwards and tried to synchronize, but after about 45 minutes in the download it asks me to put in the password.... Which my son forgot! Any other ideas?
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
HT4113 how can i unlocked the ipod disabled after too many wrong attempts
how can i unlocked the ipod disabled after too many wrong attempts
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
James5wins, you do not have to restore as new. Restoring from backup does NOT restore the screen-lock passcode. -
How to unlock ipod that has been disabled from to many password attempts
How to unlock I pod when it has been disabled due t, to many pass word tries.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My son has forgotten his password and his iPod touch has been disabled for a week. It is not synced to iTunes , how do we restore it, Help!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My daughters iPod is now disabled because of my youngest daughter trying to get on it while away. I tried to restore it as per instructions via support site. It took 5 hours to do the download. I left it over night and in the morning I found the iPod still disabled. I have a download on iTunes so I tried to click on that and it won't open. I have to admit, I am not a computer wizz here. Could someone possible direct me to what I should do now? Thank you.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
My computer is registering the ipod however itunes is not. Nothing ive tried has made it come up in itunes to let me restore. I've done the basics (i.e multiple computer restarts, switching USB ports, fresh install of itunes. I've checked the forums and everything I've found has involved things that I have been unable to do involving the itunes restore. Please save my ipod from a hammer.
You can try 2 things:
Restart your iPod by - Holding the Power and Home buttons until you see the Apple logo.
Put your iPod in DFU and restore - Hold the Power and Home until the screen goes black, wait about 2 seconds, release the power button but keep holding the home for 15 seconds, then on iTunes, Restore and Update.
Maybe you are looking for
-
Organizer in Photoshop Elements 9 won't import large NEF files
Photoshop Elements 9 won't import the NEF fiels from my new Nikon D800.
-
HELP! How te retrieve the last row in MYSQL database using Servlet!
Hi , I am new servlets. I am trying to retireve the last row id inserted using the servlet. Could someone show me a working sample code on how to retrieve the last record inserted? Thanks MY CODE import java.awt.*; import java.awt.event.*; import jav
-
Web cams in IE but not firefox
The Hogs Breath Saloon web cam wont run on FireFox4. It runs on the older version no problem. Duval St web cam has the same problem. I like to keep an eye on Key West so I look at these every day.
-
Duplicate coloumns appear in alv grid..
i added a new field in my internal table and also added the same in filed catalog. but the problem is my alv grid,doesnt show the added field correctly,it infact shows the values in the left neighbour. how to get rid of the problem? also in debuging
-
R12 - Compile Invalid objects (Fast Formula, Package Body and View) Urgent
Invalid objects about 43, in this Fast Formula 2 AP Package object, and 1 view OWNER OBJECT_TYPE COUNT(*) APPS PACKAGE BODY 37.00 APPS PROCEDURE 1.00 SCOTT PACKAGE BODY 1.00 APPS VIEW 1.00 APPS FUNCTION