My iPod has locked on the apple logo
Hi,
My iPod touch will not switch on. It simply locks up and displays the apple logo. Does anyone know who to fix this ?
Thanks for a hopefully prompt response.
I can't see restore anywhere. I've followed the help instructions too and plugged in the IPod but it's not being "found".
Am I an idiot ?
Similar Messages
-
I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore -
Has anybody had a similar problem , after charging my iPhone 5s (with the Apple charger and cable ) , the screen on the phone has locked with the Apple Symbol , the phone will neither switch on or off for me to take any action , restore , upgrade etc
I think your iPhone must be stuck in Apple logo. If so, you need to read the help guide: iOS: Not responding or does not turn on - Apple Support
-
I turned my iPhone off and when I started it up is has "frozen" showing the Apple logo and several lines of text. Any thoughts?
Never mind... i figured it out!
-
My ipod is stuck on the apple logo and won't let me connect to itunes to reset it what do i do?
My ipod is stuck on the apple logo and won't let me connect to itunes to reset it what do i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have an iPhone 3Gs and it has froze on the apple logo. I have held the on/off button and the home button together but the apple logo keeps reappearing. What Can I Do?
Try plugging it into your computer, see if that clears it up or if you can perform a restore from your latest backup.
-
while I was updating my ipod touch to ios 6 the battery got drained during the process, i tried restoring it, it couldnt now my ipod is stuck on the Apple logo screen.
Can anyone help me with this issue???Connect your iTouch to your PC then open iTunes, if iTunes does not recognize your device, try to hold the SLEEP Button and the HOME button at the same time (iPod Reset) for a couple of seconds until the "Charging Tone sounds, now you should be seeing your device name in the iTunes " Device List". If you do, just click RESTORE and iTunes will automatically restore your iTouch to original set-up and download the iOS6 update.
Hope this helps.. -
I just downloaded the ios 5 and my ipod is stuck on the apple logo
help! i tried to update my ipod to the ios 5 and it said it cant be updated and my ipod got stuck on the apple logo and i cant turn it on or off and my computer cant recongize my ipod so i cant restore some please HELP!!! ASAP thx
Did you try to connect in recovery mode?
iOS: Unable to update or restore
iOS: Not responding or does not turn on -
My ipod is stuck on the apple logo when you turn it on, how do i fix it
my ipod is froze on the apple logo that appears when you turn it on, after a while it turns off, but i can get passed this logo, could someone please help me to fix my iPod !
Try here:
iOS: Not responding or does not turn on -
My Ipod is stuck on the Apple Logo Screen
For some reason, every time I update my Ipod touch it has restarting issues. I got it late December early January, so it's still new. The first time I updated it, it told me I needed to connect to Itunes and that it was in recovery mode and long story short I had to sync it from a computer that was not my own and it took two days for me to get it back up and running. This time, it's stuck on the apple logo screen. I tried turning it off by holding the lock and home button, but it just turned right back on. So then I was hoping that I could plug it into the computer and start it on recovery mode, but it doesn't even show up as being plugged into my computer. So now i'm lost at what to do.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I need help my ipod touch 5g running ios 7.0.4 wont turn on all it has been doing is flashing the apple logo on a black background i cant stop this does anybody know what to do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod its paralysed with the apple logo
my new ipod touch is paralysed with the apple logo, it happened when i tried to download and update the new iOS, it turn off then on with the apple thingy and then it has been there for at least 3 days ago, can someone help me?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My New iPod gets stuck on the Apple logo screen.
I got a new ipod but there is one problem with it. For hours at a time it gets stuck on the apple logo screen. In this state it does not connect to my computer. I cannot get it to play music because everytime I manage to get it started up the apple logo screen pops up and shuts it down again.
Also, on the occasions where my computer DOES recognize my iPod, my iPod says it has about 1 GB of "other files" and about 1 gb of "audio files". I understand the audio but I don't remember putting anything onto my iPod that wasn't audio. What are the "other files" and how do I remove them?
Message was edited by: granolabar2345
< Title edited by Host >Other can be Album Artwork, Notes, Contacts, Firmware etc. or files that are on there if you are using the iPod as a removable storage device. If you feel that Other is being incorrectly reported then try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7
-
My ipod is stuck on the apple logo and nothing is working
The screen on my ipod touch just went black and then came up with the apple logo after I plugged it in. It has been about 20 minutes and nothing has happened. I've tried resetting it but nothing is working. Please help. Thank you so much!
If a hard reset does not work, try putting it in DFU mode and restore it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
My ipod turns on shows the apple logo, then turn into a white screen until it dies.
I was updating my ipod and it was almost complete, it restarted and the loading bar under the logo stopped. Then the ipod restarted again and now when it turns on it shows the apple logo, then turns into a white screen until it dies. After I charge it again it does the same thing automatically. Ive tried to restart and restore it but it wont work. What do I do? I've tried all the troubleshooting and nothing is helping. The screen is also cracked, this wasnt the cause because it worked fine for 3 months after it was cracked.
See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful that indicates a hardware problem. It could be that the damage started with the drop that also caused the cracked screen and the damage progress to the problem you have now. An example would a cracked that has finally progressed to it causing the problem.
Maybe you are looking for
-
Out of Sync audio involving 12 - 16 bit HELP!!!!
Dear Apple Community, I recently video taped my brothers wedding on my Canon PAL MV700i mini DV. Little did I know I recorded in 12 bit audio, which ive learnt is bad(ive now changed over to 16 bit). When capturing onto Final Cut Express I did so in
-
Vendor Master Replication from 2 Backend System
Hi Experts, I am facing a problem in replicating the vendor masters from two Different Logical ECC systems. The vendor master at 1st Backend system Vendor Master: 0011000196 Company Code: C001 Pur.Organization: P001 The vendor Master at
-
IDOC_AAE in integrated configuration and condition based routing RCVPRN
Hi, we send IDOC's from an ERP system to our PI 7.3 system. The IDOC_AAE adapter is configurated inside an integrated configuration. The routing should base on the RCVPRN context field. But in that case the sending process exits in SM58 of the sender
-
Special characters to be displayed on the invoice PDF
Hi, We have a requirement to display the name of the contact person of BTP in invoice PDF as "Stefan König". I have a doubt that if we translate the text field in the respective language whole name will be affected. As we need both english characte
-
[Solved]Bash: get positional parameter '$num'
I can't figure out how to do it without using eval: eval param='$'{$num} I'm pretty sure it's safe, because num will either be $# or the result of $(( $# - 1 )). But it seems like there should be a non-hackish way to do this. XYZ: I use diff a lot to