My ipod in not turning on,screen is blank

My ipod in not turning on and
not recognized in computer,
screen is blan

Try:                           
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • Hi, I have a problem with my ipod 5,does not turn the screen, and it is talking a lot, what can I do?

    Hi, I Have problem with my ipod 5, what can I do?
    It is talking and does not turn the screen with my finger!

    sounds like a hardware failure.  Return the phone to Apple.

  • Ipod will not turn on. Black screen no logo. Nothing. I do mean nothing. Tried hold power and home. Tried connecting to PC. Nothing. Whatever i do nothing happens. No backlight. Nothing. I really mean nothing. I have tried every fix offered on comments.

    Ipod will not turn on. Black screen no logo. Nothing. I do mean nothing. Tried hold power and home. Tried connecting to PC. Nothing. Whatever i do nothing happens. No backlight. Nothing. I really mean nothing. I have tried every fix offered on commentson other post about the same problem. Does anyone know a fix for this. Please dont tell me to hold the power and home i have tried that IT DOES NOT WORK for me.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HT4531 My 6th generation nano appears to have locked up.  The screen is on, but nothing happens, and Ipod will not turn off. hear a buzzing noise in headphones.  what can I do?

    My 6th generation nano apears to have locked up.  The screen is on, but Ipod does nothing.  The Ipod will not turn off, and a buzzing noise is heard through the headphones.  What can I do??

    Hello houseman06
    Check out the troubleshooting steps in the article below to get your iPad nano back up and running. Also check to make sure that the lock button is not on preventing it from being un responsive. 
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Regards,
    -Norm G.

  • IPod will not turn BACK ON!  Cold weather?

    My iPod will not turn back on. I left it in a cold car for a few days while I was at my family's house, and the battery must have died while I was there. I came home and plugged it in, but it wouldn't charge or turn on. Help!!

    Try sending it to the itunes store because when i left my ipod in a car for a few days it worked fine. if you haven't tried the 5 rs try those first.
    To reset your iPod nano (2nd generation):
    Reset
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    Retry
    Retry your iPod with a different USB or FireWire port on your computer (please note that the latest iPods can only be synced through USB).
    Restart
    Restart your computer, and make sure that you have the latest software updates installed.
    Reinstall
    To reinstall your iPod nano (2nd generation):
    To update and reinstall your iPod software, first download the latest iTunes software.
    Next, open the new version of iTunes and connect your iPod to your computer. iTunes will then automatically check to see if your iPod needs to be updated and perform the update for you.
    To then check the software version on your iPod, select it from the source list in iTunes. iTunes will display the information about your iPod.
    Restore
    To restore your iPod nano (2nd generation):
    Warning: Because Restore erases all of the songs and files on iPod, make sure to back up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library. If you use the Nike + iPod Sport Kit, see this document for more information.
    How to restore your iPod:
    Make sure you've reinstalled the latest version of iTunes.
    Open iTunes, and then connect your iPod to your computer.
    After a few moments, it will appear in the Source list in iTunes.
    Select your iPod in the Source list and you will see information about it appear in the Settings tab of the main iTunes windows.
    Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
    Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
    Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
    Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
    Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
    A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
    During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
    After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
    Mac Book   Mac OS X (10.4.8)  

  • TS1363 My ipod will not turn on at all.  When I connect it to the laptop by the USB, it does not recognize it at all.  What could possibly be the problem?  The Nano was working like 30 minutes ago.

    About 30 minutes ago, I was adding some music to the ipod Nano.  Everything was working fine.  Now, the ipod will not turn on at all.  When I connect it to the laptop with the USB, the computer does not even recognize it.  The screen has a fant image of the plug on it and it says connected.  I followed the procedures for disconnecting it when I was finished with it earlier.  Any idea what is going on here???
    Thanks

    It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/

  • IPod will not turn on unless connected to MacBook

    I have a new iPod Nano (January 2014 purchase) that had a run-down battery. When I plug it into my MacBook, it shows up and I can sync new Music to it. However, after ejecting it properly, the screen remains black and I can't power it up or even reset it by holding down both the Home and Power buttons at the same time. Anyone else experience this?

    Hello Tim,
    Congratulations on your new iPod nano, but I'm sorry to hear that the screen stays black after disconnecting it from your MacBook.  I recommend these steps for the issue you described:
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT201210 when i did the new update my ipod does not work the screen is now white

    when i did the new update my ipod will not turn on the screen gets lines then turns white or blue or green with lines what do i do to fix it???

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

    i tried it on my tv sony bravia w700b with my new xperia z1 
    i didnt unlocked my bootloder or i didnt rooted my phone
    dont know whats the problem is
    'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

    Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
    If you have unlocked your bootloader this may also be the cause for this issue.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • My iPod does not turn on and it is not recognized by my laptop in iTunes... What can I do?

    My iPod does not turn on and it is not recognized by my laptop in iTunes... What can I do?
    Model iPod 2 Touch, 8G, It stoped working less than a month after it was purchased but I never sent it back for repairs or warranty to Apple.. Is there still a way to repair it on my own. It just simply does not turn on or charge and it is not recognized by iTunes when I plug it in to my MacBook Pro.
    Please advise...

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
    Apple Retail Store - Genius Bar              

  • My problem is that the iPod does not turn on. Everytime I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a warning sign.

    IS MY IPOD DEAD?!?!?!?!?
    I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
    iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
    warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
    to charge it as well as connecting it to itunes but no success. Could you please help?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • So i cant download itunes cuz of some patenting control on the computer and  i needed to restore it . so went on icloud (find my phone,ipod etc) and restored it and my ipod is not turning on but ist is still buffering from the past 10 mins

    so i cant download itunes cuz of some patenting control on the computer and  i needed to restore it . so went on icloud (find my phone,ipod etc) and restored it and my ipod is not turning on but ist is still buffering from the past 10 mins

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • "The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

    "iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • HT201412 Hi , my Ipod touch4 not turning on even not connecting to computer... How can i fix this problem !!!! plz

    Hi , my Ipod touch4 not turning on even not connecting to computer... How can i fix this problem !!!! plz

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • I can not turn my screen on my new phone 5s

    I can not turn my screen on my new phone 5s IOS 8.1.1, locking and unlocking the function in the control center and get no response, and i restore the iPhone to and nothing

    Try this If your iOS device restarts, displays the Apple logo, or powers off while you're using it and if it does not work - bring the phone to an Apple or authorized repair store

Maybe you are looking for

  • Windows Explorer no longer displays the LAN computers

    Hi I use Windows 7 SP1 Ultimate 64 bit, I'm in a local area network (peer to peer), I not do use the homegroup service and I have no firewall/antivirus activated. Now, I have a computer that has problems of resource sharing: 1) When opening Windows E

  • Acrobat Reader 6.01 missing .itw in Czech version

    Hi I downloaded Full version od Acrobat Reader 6.02 Czech (AdbeRdr602_cze_full.exe) and convert/decompress web-based installation to cd installation by guide. I can't find .itw file for InstallShield Tuner. Can somebody help me? Thanks Lukas

  • RDWeb Icons & Titles out of alignment

    As you can see.  The icon and title are out of alignment.  This just  happened a couple of weeks ago.  Any ideas?

  • How can i get live support? Forgot my password and...

    Hi, i accidentally logged out from skype and i have been forgotten the password for some reason, i have made a clues to my book about pw but i dont understand my one clue that would let me in. I can say everything about my password etc. account is ma

  • How to see colors on my Mac the way a PC user sees them

    Hi all, I've been scouring the web to try and find a simple explanation of how best to calibrate color on my Mac so that photos that I edit there will appear properly when viewed on the web by a Windows user. I was working using a profile that made t